8 UP Thermal CTP Avalon N8 50 XT year 2008 250,000 plates produced MAL 4 cassettes, 2 punches bacher 425W 780W bridge Arkana 125 online-processor ethernet to PIF interface Price: on request ... más información
CTP Thermal Manufacturer: Heidelberg Model: Suprasetter 106 Year: 2014 System including: Platessetter with DCL, G&J processor, Stacker Without PC and Metashooter just PC Card and cables Possible preparing for transport price: on request Location Poland ... más información
4 up Thermal CTP Kodak Trendsetter 400 Model: TS 8 Year: 2003 40 mW laser with Printconsole Price on request ... más información
SCREEN CTP PLATE RITE 4100 Manufacturer: Screen Model: PLATE RITE 4100 year 2006 with developer of plate washing device. Condition: CTP is working well. available in Jun/ July 2021 Price: on request ... más información
Film Imager / Image Setters Manufacturer: AGFA Model: Avantra 25 OLP year: unknown no RIP Price: on request ... más información
4 up CtP Platesetter Kodak Magnus 400 II Year: 2010 with prinergy Evo Rip Price: on request ... más información
Manufacturer: Screen Model: PT-R 4100-E SAL Year: 2005 platecounter 30,700 Clamp Cycle 9,800 Single autoloader SAL-E Stacker with backboard On pallet for international shipment Studio Rip installed on PC Location: netherlands Price: on request ... más información
Plate Exposure , Top Condition ... más información
CtP VLF Platesetter Manufacturer: Kodak Model: Magnus VLF Year : December 2009 Kodak Print Console with PC Plates issued: approx. 125,000 Speed 10 plates / hour Autoloader with 4 cassettes for 40 0.40 mm plates each. 125 development machine from G & J automatic plate stacker Avialable: 09/2021 Price on request
Thermal CTP Platesetter Manufacturer: Heidelberger/Creo Model: Trendsetter 3230 Laser new, 440 hours year: approx. 1997 Location: germany Price: on request ... más información
4 up Thermal CTP Heidelberg Topsetter P74 Year of production: 2003 (first installed in May 2004) Bridge between CTP and developer Developer Agfa Azura C95, year of production: 2015 Automatic stacker for plates Computer with SignaStation Computer with RIP MetaDimension Actual Running Time: 7609h Exposure Time: 4536h Plate winding cycles: 115454 Price on request
8 up Thermal CTP Model: Screen 8600 (Topsetter 102) 64 diodes Year: 2004 with Loader AT-T 8001 Year: 2001 Stacker Plate Counter: 316,000 Price: on request ... más información
4 up Thermal CTP Manufacturer: Agfa Model: Avalon N4 10S Year: 2012 Platesetter Architecture: external drum Laser technology: 830mm infrared thermal Light source: 32-channel infrared laser diodes Image area: Maximum 830mm x 633mm (front margin 15mm, rear margin 12mm) Resolutions: 1200-2400dpi Plate Sizes: Maximum plate: 830mm x 660mm Minimum plate: 324mm x 370mm (standard) 304mm x 370mm (optional) Thickness: 0.15mm to 0.3mm AGFA ELANTRIX 95SX Processor Plate width min-max: 200x950mm Plate length min: 300mm Plate thickness min-max: 0.15-0.4mm Procesing speed: 10-160cm/min Throughput: 58pl/hr(portrait 745x605mm) 44pl/hr(portrait 1030x790mm) Tank content, developer: 57l Tank content, wash: 40l AGFA ELANTRIX ST95EX PLATE STACKER Price: on request
2-up violet Ctp imagesetter Manufacturer: Screen Model: Plate Rite Micra Year of Construction 6/05 with four plate trolleys and Harlequin RIP software. with Ctp Plateprocessor Year 3/05 built Manufacturer: Kodak Model: Polychrome Condition: The gears might have to be changed from the rollers. Some Plateprocessor fluid is also included. Price: on request
Fully automatic Thermal CTP exposure Heidelberg Suprasetter A 52; good condition; suitable for thermal printing plates; Meter reading 107.00 plates; Workflow Meta RIP and ZIP 3 output; integrated Auto Top Loader; Punch 425mm Autoplate; Suction for ablative printing plates; Transfer bridge; Washout G+J C 85; Printing plate forklift Grafoteam PST 26. Full automatic thermal plate setter Heidelberg Suprasetter A 52; good condition; used for thermal printing plates; counter only 107,000 plates; workflow Meta RIP with ZIP 3; auto plate loading system; punch 425mm autoplate; debris removal system; bridge; washing unit G+J C 85; plate stacker Grafoteam PST 26.
Thermal CTP Manufacturer: Heidelberg Model: Suprasetter A 52 Year: 2008 max. platesize: 670 x 525 mm with RIP Further details on request Price: on request ... más información
BasysPrint 855 (Online System) Built 01/ 2010 2-Laser Head UV,405nm Exposed Plates 85600 Max:Plate Size 920 mm x 1,080 mm Min: Plate Size 323 mm x 450 mm Cassettes Manager 1 Cassettes With Kodak Merxury 85 PlateProcessor Server PC, 20 TFT Monitor. ... más información
Printing plate bending for Heidelberg SM 52 Beil PB-S 52; good condition; cleaned and tested; Stand-up device; suitable for printing plates Heidelberg SM 52. Plate bender for Heidelberg SM 52 Beil PB-S 52; good condition; clened and checked; used for Heidelberg SM 52 plates. ... más información