mandriladoras e centros de usinagem usadas para venda

W 200G with Siemens AC main motor. modernized the main drive by instalation of Siemens AC motor with SIMODRIVE 611. Original built ISO 60 taper and 630 rpm Main data: X=8000 mm Y=4150 mm Z =1600 mm W=2000 mm Spindle dia 200mm ISO 60 spindle speed max 800 rpm Accessories: DRO Philips available as original rotary table E 20 4 floor plates 5600x1880x400mm milling head IFH 1 and IFW 3 counter steady SKODA IOT 4150

Table diameter: 1100mm, number of drilling units: 3, power: 1.5kW. ... mais informação

Specifications: - Drilling performance - in steel 6 mm - in aluminium 10 mm - Drilling depth 60 mm - Projection spindle / column 200 mm - Drilling spindle speeds 450 - 4500 rpm - Drive 380 V / 0.6 kW - Height-adjustable drilling unit with hand crank - Table dimensions 280 x 280 mm - min. / max. distance spindle table 20 / 210 mm - Drilling unit can be swivelled laterally left + right - Space requirement approx. W 280 x H 750 x D 600 mm - Weight approx. 180 kg - with quick-action chuck 1 - 6 mm

vertical boring machine brand froriep model bft160 Used machine visible in Italy, sold as it is ... mais informação

The machine is a group of two machines on the same bed. The main difference between them are the travel on Y axis. There are a fixed table and a rotary table in the front of them. The rotary table is used only by one of the machine. Boring spindle diameter 221 mm Boring spindle taper ISO 60 Headstock section 1145 x 860 mm Power of main drive motor 100 Kw Gearbox steps 2 Main spindle speed 2,7-600 rpm Column horizontal travel (X axis) (machine 1) 18000 mm Column horizontal travel (X axis) (machine 2) 22500 mm Headstock vertical travel (Y axis) (machine 1) 5000 mm Headstock vertical travel (Y axis) (machine 2) 6000 mm Headstock horizontal travel ( W axis) 1500 mm Boring spindle travel (Z axis) 1500 mm 5 CNC axes – Siemens 840D Able to work with face plate  ...

spindle diameter: 125 mmx-travel: 2500 mmy-travel: 2100 mmspindle taper ISO: 50 spindle turning speed range: 5-1000 U/minspindle travel: 900 mmRadial face slide: 650 mmradial face slide travel: 250 mmangular milling head: rotary table:: table surface area: 2000x2500 mmtable height: 800 mmtable travel: 1700 mmtotal power requirement: kWweight of the machine ca.: 25 tdimensions of the machine ca.: mTable, Floorplate, toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cycle time: 0 sectotal power requirement: 2,5 kWweight of the machine ca.: 1 tdimensions of the machine ca.: m: : : : : : : Horizontal 3-Spindle Fine Boring Machines Boring Æ 0.15 - 2 mmSpindle stroke 0 - 18 mmWorking stroke, max. 0 - 12 mmQuick feed 60 mm/secBoring feed 0 - 5 mm/sec Spindle speeds 3,500 - 11,500 rpmDistance between spindles, vertical, approx. 80 mmTable speeds (for deburring) approx. 100 rpmTable Æ, approx. 100 mmTable bore, approx. 70 mmTable slide swivelling device, approx. 60 °/secSwivelling range 0 - 100 °Total drive, approx. 2.5 kW Weight 1,000 kgAccessories / Special FeaturesSerial No. 6.8230/9Machine is equipped with a modern POSALUX SELECTRON Controlwith keyboard and LED for direct programming on the machine (inprinciple the same as with a punchboard control). With setting microscope and machine lamp.The data for this ad was created with ModulMWS - ...

Spindle diameter 100 mm x-travel 1600 mm y-travel 895 mm z-travel 800 mm Table area 1200x1000 mm Table load 4000 kg Spindle stroke 600 mm Speed 14-1500 rpm Feed 1.7-2400 mm/min Rapid traverse 2500 mm/min Total power requirement 9.7 kW Machine weight approx. 12 t Guide paths hardened Tool holders ISO 50 Machine is energized, Schematic

Type: WHN 13A Parameters: 130 mm, 2000 mm Manufacturer: Tos Čelákovice Year of production / SO / GO: 1979 / - / - Description: Heidenhain control system Cross arrangement of beds Four axes + rotary table Retractable working spindle Machine designed for universal engineering production Heidenhain control system Axis strengthening hydraulically Machine parameters: X-axis 3510 Y axis 2040 Z axis 1200 W 800 axis incl. reinforcement, 600 without reinforcement Clamping surface of the table 1800 x 1800. The machine is connected, with the possibility to test. Bearings and damaged wheels must be replaced in the headstock.

: ja feed: 80 - 800 m/min: 1848 weight of the machine ca.: 2,2 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

bore capacity in steel (diameter): 18 mmthroat: 225 mmbore stroke: 110 mmtable-size: 430x345 mmspindle turning speed - stepless: 135-4500 U/minweight of the machine ca.: 0.7 tDigital read-outTapping attachmentCross table 530x255mmMisc accessorieswww.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50 mmarm length: 1250 mmworkpiece height max.: ca. 1150 mmbore capacity in cast iron: 60 mmspindle taper: MK 5 spindle turning speed range: 12,5 - 1000 U/minfeeds: 0,06 - 0,5 mm/Ucrossrail adjustment vertical: 620 mmcolumn diameter: 350 mmtotal power requirement: 7,7 kWweight of the machine ca.: 4,6 tdimensions of machine L x W x H: 2,53 x 1,15 x 2,82 mAccessories: swivelling box table, coolant- additional column guide at the end of arm -The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 180 mmx-travel: 8800 mmy-travel: 3500 mmControl: Siemens type: 840 C ram: horizontal adjustment: 970 mmspindle travel: 1200 mmdimension of the ram: 400x400 mmPlate area: 6000x4000 mmrotary table:: Table load: 25000 kgtable travel: 1500 mmangular milling head: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2200 mmtable width: 2200 mmtable load: 16 ttable adjustment - longitudinal: 1500 mmtable rotating: 360 Gradfeeds - longitudinal: mm/mintotal power requirement: 6,5 kWweight of the machine ca.: 11 tdimensions of the machine ca.: 2,4 x 4,2 x 0,7 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Boring power: 55 mmdia. of quill: 110 mmthroat: 2000 mmworkpiece height max.: 1100 mmfeed: 0,05-2,5 mm/Usurface area: 2000 x 1100 mmspindle turning speed range: 14-1000 U/min: 800 x 500 x 500 mmtotal power requirement: 11 kWweight of the machine ca.: 8 tdimensions of the machine ca.: 3,9 x 1,5 x 3,4 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 1980 tool taper: MK : 205 - 1450 m/min.boring range:: 3 - 40 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

Offer 23010 Specifications: - Drilling capacity 20 mm - Drilling spindle mount MK 2 - Drilling spindle stroke 140 mm - Drilling spindle speeds infinitely variable 150 - 3000 rpm - Projection 285 mm - Column diameter 105 mm - min. / max. distance drilling spindle / table 245 / 675 mm -Lighting - Quick-action chuck - Coolant device - Machine vice - Machine undercarriage - Drive 400 V / 0.5 / 0.9 kW - Dimensions W 600 x H 1900 x D 900 mm - Weight approx. 200 kg

table length: 2000 mmtable width: 1800 mmtable load: 12,5 ttotal power requirement: 10 kWweight of the machine ca.: 7,5 tdimensions of the machine ca.: mTable size approx. 2,000 x 1,800 mmMax. weight of workpiece, approx. 12,500 kgTable travel, longitudinal 1,250 mmTable height above floor 920 mmLongitudinal feed 0.63 - 2,000 mm/min Turning feed, with Ø 1,000 mm 1 - 3,150 mm/minLongitudinal quick feed 2,000 mm/minTurning quick feed, with Ø 1,000 mm 3,150 mm/minWeight of machine 7,500 kgExternal dimensions of machine 3,700 x 2,100 x 920 mmTotal electrical load 10 KW - 180 V - 50 HzAccessories / Special Features Telescopic covers for the guides. Infinitely variable table feed. Optical display for setting and reading the longitudinal adjustment. Optical display for setting and reading the angle.Condition : Satisfactory to good. Machine can be inspected under power.Delivery : ...

Code 61080 Description Horizontal table borer Make UNION Model BFT 90/3 at Serial number 25 742 Year 1979 ( 1980 in use ) Control Heidenhain TNC 121 Spindle 102 mm Spindle taper ISO 50 Spindle out (W) 710 mm Table 1400 x 1250 mm Cross (X) 1000 mm Longitudinal (Z) 1600 mm Vertical (Y) 1000 mm Distance table-spindle 0 – 1000 mm Weight on table 3000 kg 24 Spindlespeeds 8 - 1600 rpm Feeds 1 - 3000 mm/min Rapids 3 m/min. Motor 11 kW 380 Volts Accessoiries 3 x DRO Heidenhain ( X-Y-Z ) Tool clamping Guideway protection Pendel control Cooling equipment Option ( extra price ) Universal millinghead with 600 mm gap

WMW-Union // BF-T 90/3Offer Control: Heidenhain TNC 124 Year of construction: ca. 1980 X-axis: 1,530 mm Y-axis: 900 mm Z-axis: 1,500 mm Spindle diameter 100 mm Spindle speed 8-1,600 rpm 24 stages Drive power spindle 11kW Recording SK50 Table size 1.250x1.400mm  ... mais informação