A indicação da distância não é possível, porque não foi possível determinar sua localização. O pré-requisito é que seu navegador permita cookies e determinação de localização.

 

Fabricante:
(Categoria: 105)

ABB 1
BTM 2
CM 1
CS 1
CY 1
DDR 1
ELU 3
FAT 1
FMB 3
HBA 1
HBM 13
IBP 1
Imet 17
KA 1
MACC 13
MEBA 27
MEP 105
MG 1
OMP 3
RES 1
RIX 1
TBA 1
Tmj 3
UKM 2
UWM 2
WMT 3
WMW 2
WRT 1
ZKM 1
Máquina: MÖSSNER SSF/500 Vertical Bandsaws
Número do item: 131217817
Ano de construção: 1963
usava

Cutting speed:-3 gearbox stages + Variogetriebe 15-940 m / min -Overdrive 2350 m / min Plate B x T CA 700 x 600 mm RADIUS approx. 480 mm Cutting height Max approx. 360 mm Space requirements, B x T x H approx. 1.1 x 0.8 m estimated approx. weight 1 to Equipment:-rubber of the two rollers is in good condition -IDEAL band sealer - table Tiltable

serras / 带锯
Máquina: MÖSSNER SM 300 带锯
Número do item: 157991079
Ano de construção: 1964
usava

: ja weight of the machine ca.: 150 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

Máquina: MÖSSNER SM 400 立式带锯
Número do item: 161477863
Ano de construção: 1965
usava

roll diameter: 400 mmthroat: 390 mmworkpiece height: 240 mmsaw band length: 2980 mmtable surface area: 500x600 mmweight of the machine ca.: 350 kgdimensions of the machine ca.: 650x1100x1700 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

serras
Máquina: MÖSSNER SSF/500* 带锯 - 垂直
Número do item: 156965951
Ano de construção: 1965
usava

roll diameter: 500 mmthroat: 485 mmworkpiece height: mmtotal power requirement: 2 kWweight of the machine ca.: 1 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

Máquina: KLäGER 4B/400 钢锯床 弓锯床
Número do item: 160897572
Ano de construção: 1965
usava

Klaeger hacksaw 4B/400 workshop tool old Model: 4B/400 Machine no.: 81388 Year of construction: 1965  ... mais informação

Máquina: SAMUR S-1000 V 立式带锯
Número do item: 164427692
Ano de construção: 1966
usava

roll diameter: - mmthroat: 1000 mmworkpiece height: 350 mmtotal power requirement: 3 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2 x 1 x 2 mNo. 4428Horizontal band saw SAMUR S-1000 VCutting height 350 mmCutting speed 20-800 mmBlade length : 4,550 mm.Blade width : 4 to 15 mm.Infinitely variable cutting speed : 23-711 m / minElektromot r380 VTable dimensions: 610 x 610 mm Table extension leftWelding deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

serras
Máquina: HELLER KA 315 Cold circular saw
Número do item: 156214167
Ano de construção: 1966
usava

saw blade diameter: NA mmcutting diameter: NA mmstroke: mmworking area: 90 mmworkpiece dia.: 90 x 500 mmfeed:: 500 mm total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

Máquina: MÖSSNER REKORD SSF 1050 带锯自动机
Número do item: 162197460
Ano de construção: 1968
usava

roll diameter: 500 mmthroat: 1050 / 485 mmworkpiece height: 300 mmsaw band length: 3920 - 4050 mmcutting speed: 15 - 940 m/mintable height: 1040 mmtable surface area: 750 x 800 mmTable tiltable: 15 Gradtotal power requirement: 4,0 kWweight of the machine ca.: 1750 kgdimensions of the machine ca.: 2100 x 1000 x 2100 mm- Fully automatic miter band saw- MAC 90 control- Saw feed infinitely adjustable via precision throttle- Infinitely adjustable clamping pressure- Infinitely variable speed adjustment of the saw band- hydraulic bundle clamping- chip conveyor- Cooling device- Micro dosing device- Machine lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

serras
Máquina: SCHLEGEL U. VOLK Bandsaege Band Saw - Vertical
Número do item: 165022724
Ano de construção: 1968
usava

Cutting height:150 mmsaw band length:2400 mmcutting width:350 mmtotal power requirement:380 Vweight of the machine ca.:350 kgdimensions of the machine ca.:800 x 950 x 1650 mm ... mais informação

Máquina: EISELE LMS 2 圆盘冷锯机
Número do item: 161549441
Ano de construção: 1968
usava
Preço: 1.100 €

Eisele cold circular saw LMS 2 380 V 16 A 1700 - 3400 rpm 1 clamping jaw without locking  ... mais informação

serras / 带锯
Máquina: PRVOMAJSKA S4 带锯
Número do item: 164498823
Ano de construção: 1970
usava
Preço: 850 €

Metal Band Saw Saw blade welding machine, grinder Swivel table 380 V 16 A Electrics must be checked. Saw Blade Compressor for air blowing.  ... mais informação

Máquina: EISELE VA II 自动圆锯机
Número do item: 159173882
Ano de construção: 1970
usava

Saw blade Ø: 315 mm Cutting range at 90° round: 90 mm Cutting range at 90° square: 80 x 80 mm Cutting speeds: 12.5 - 25 m/min Feed speeds: hydropneumat. Stufenl. adjustable Section length: 5 - 1580 mm electr. Connection: 380 V Space requirement: 2300 x 1000 x 2800 mm Weight: 940 kg  ... mais informação

Máquina: MÖSSNER RECORD SSF/420 立式带锯床
Número do item: 159829642
Ano de construção: 1970
usava
Preço: 2.300 €

Used band saw from MÖSSNER MÖSSNER RECORD SSF 420 Band Saw IDEAL BSO/16 Band Saw Welding Machine Roll diameter 420 mm Projection 410 mm passage height 265 mm Table size 600 x 600 mm Table left + re. swivel 15 / 30 ° each Saw blade length 3150 - 3260 mm Saw band width 3 - 16 mm Cutting speeds infinitely adjustable Current 400 V / 16A Weight approx. 600 kg Space requirement approx. W 900 x H 1900 x D 1000 mm Grindstone, band scissors, lighting Good condition See pictures Viewing and pick-up possible Shipping Germany (without islands) 139,00 Euro net The goods can be viewed at the location 59379 Selm by appointment. Company Michael Bergau Tel. 0152/29500504 You will receive an invoice with VAT shown. Payment: Payment by bank transfer before delivery of the goods. Or cash payment on collection.

serras / 圆锯
Máquina: EISELE VMS II 圆锯
Número do item: 164229932
Ano de construção: 1971
usava

saw blade diameter: 275 mmcutting diameter: 90 mmstroke: 120 mmmitter cutting - all-position: 90 - 30 °turning speed range: 40 / 80 U/minvoltage: 380 Vtotal power requirement: 1,4 kWweight of the machine ca.: 290 kgdimensions of the machine ca.: 0,80 x 0,90 x 1,30 m- Fab.-No.: V25188- coolant equipmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Máquina: OHLER KA 400 圆盘冷锯床 圆盘式冷锯机
Número do item: 161680265
Ano de construção: 1971
usava
Preço: 1.590 €

Speed range with saw blade, diameter 400 mm 10 – 44 rpm Max. cutting diameter for round material 125 mm Machine weight approx. 1 t  ... mais informação

serras / 圆锯
Máquina: EISELE KMS metal circular saw
Número do item: 164918400
Ano de construção: 1971
usava
Preço: máquinas usadas leilão RESALE 60 €

Description: Machine number 4036 Voltage 380 Vsaw blade diameter: 200 mm, weight approx.: 250 kg, Approx. Onsite Dimension. (l x w x h): 1,000 x 700 x 1,550 mm, turning speed range: 40 / 80 rpm ... mais informação

Máquina: KALTENBACH SKL 350 Miter Bandsaws
Número do item: 34042868
Ano de construção: 1971
usava

Saw blade diameter: 370 mm cutting capacity at 90°: 115 mm cutting capacity at 45°: 115 mm drive motor: 380 V, 4.5 kW space: 1000 x 1200/2200 x 1500 mm weight: approx. 900 kg  ... mais informação

serras / 带锯
Máquina: SELECT SU-10 带锯
Número do item: 159098447
Ano de construção: 1972
usava

table-size: 670 x 670 mmthroat: 1030 mmworkpiece height: max. 300 mmsaw band length: min. 4700 mmsaw band length: max. 4800 mmtotal power requirement: kWweight of the machine ca.: 1,0 tAccessories: saw band welding and grinding attachment- table swivelling left / right- hydr. feed in tableThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

serras / 带锯
Máquina: MÖSSNER REKORD SM 420 B 带锯床
Número do item: 161183438
Ano de construção: 1972
usava

Specifications: - Roll diameter 420 mm - Projection 410 mm - passage height 265 mm - Table size 600 x 600 mm - Table left + right. Swivel 15 / 30 ° each - Table height from the floor 1020 mm - Saw blade length 3150 - 3260 mm - Saw belt width 3 - 16 mm - 8 cutting speeds approx. 18 - 562 m/min - Drive 400 V / 1.1 / 1.7 kW - Weight approx. 650 kg - Space requirement approx. W 900 x H 1900 x D 1000 mm - E. foot switch

Máquina: EISELE LMS2 圆盘冷锯机
Número do item: 161549440
Ano de construção: 1972
usava
Preço: 1.200 €

Eisele cold circular saw LMS2 Voltage 380 V 16 A Speeds: 1700 - 3400 rpm Good condition  ... mais informação