serras usadas para venda

Horizontal saw with position control Cutting area round: 320 mm Rectangle cutting area: 320 x 320 mm Band saw dimensions: 5250/5350 x 32 x 1.1 mm Belt speed: 15 - 110 m/min Saw drive: 380 V, 4 kW Weight: 2200 kg  ... mais informação

Technical data:-Roll diameter 420 mm -Throat depth 410 mm -Max volume height 265 mm -Table size 600 x 600 mm -Table li. + re. Tiltable 15 / 30 ° -Table height 1020 mm -Blade length 3150-3260 mm -Saw band width 3-16 mm -8 speeds 12-375 m / min -Drive: 400 V / 1.1 / 1.7 kW -Weight approx. 650 kg -Space requirement approx. B 900 x H 1900 X 1000 mm -with: - blade welding machine in the machine base - grinding wheel and lamp -Scissors, air pump and lighting

No. 5230: 1 Gebr. Cold circular saw with additional gearbox for 4 speeds Fabr. EISELE, Type VMS II - S - PV ( Type-No. 421 ), Bauj. 1986 with feed - roller conveyor approx. 2 m Arb.-Ber.: Ø 80-102 /flat 160x75/82 mm, drive power: 1.4/1.9 kW Other: Additional gearbox 10/20/40/80 min-1 Cutting speeds 8.5 - 80 m/min Saw blades Ø 275 - 315 mm Space requirement approx. 80 x 90 x 180 cm (plus roller conveyor + stop) Weight approx. 400 kg No. 5230: 1 used Cold circular saw with additional gearbox for 4 speeds Make EISELE, mod. VMS II - S - PV ( Type-No. 421 ), new 1986 with Feed - roller conveyor approx. 3 L Workrange: Ø 80-102 /Flat 160x75/82 mm, main motor: 1,4/1,9 kW Remarks: Auxiliary gear 10/20/40/80 min-1 Cutting speeds 8.5 - 80 m/min saw blades Ø 275 - 315 mm space requirement approx. 80 x 90 x 180 cm ( plus roller conveyor + fence ) weight approx. 40 ...

specifications: - Saw blade diameter up to 400 mm - Cutting range at saw blade diameter 400 mm - at 90° around 130 mm - square 120 mm - flat up to 260 x 60 mm - Miter adjustment left + right 0 - 90 ° - Cutting speed 1750 / 3500 m/min - Feed speed of the saw blade 0 - 3 m/min - Rapid return 3000 mm/min - Saw drive 400 V / 3.7 / 4.4 kW - 2 pcs Pneum. Material clamping sticks with adjustable clamping pressure - Space requirement approx. W 1200 x H 1900 x D 1200 mm - Weight approx. 600 kg

Eisele PSU Hydraulics 470 Masch Nr 1141 Built 1986 RPM 6-48  ... mais informação

heavy duty. Cutting capacity round/square 400 mm min. length 300 mm Max length a single / double feed 600/1200 mm  ... mais informação

Machine Type: Hacksaw Machine Manufacturer: STANKO Model No.: 8725 Year of construction: 1986 Condition: good Offer Type: Used Machine Specifications: Cutting area: Ø 250 mm Drive type: el./hydr. Propulsion: 2.2 kW Remark: coolant device, Hydraulic lift-off Weight: 500 kg The machine is in good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

saw blade diameter: 350 mm, cutting range 90 degrees: round: 120 mm, weight approx.: 750 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,850 mm ... mais informação

Specifications: - Saw blade diameter up to 400 mm - Cutting range at 90° approx. 130 mm - Square 120 mm - Rectangle 300 x 40 mm - or 240 x 85 mm - at 45° around 130 mm - Square 110 mm - Rectangle 245 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 cutting speeds 13 + 26 m/min - Drive 400 V / 1.2 / 1.8 kW - Feed speed of the saw blade hydr. infinitely variable - Coolant device - Material replenishment machine ( clamping arm can be folded away ) - Space requirement approx. W 2400 x H 1850 x D 1100 mm - Weight approx. 1250 kg

cutting diameter: 400 mmband length: 640 mmstroke: mmcapacity 45 degrees: round: mmcapacity 45 degrees: flat: mmcapacity 90 degrees: square: mmtotal power requirement: 3,2 / 4,0 kWweight of the machine ca.: 0,65 tdimensions: 1,7 x 0,65 x 1,8 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 420 mmsaw band length: 0 mmcutting width: 0 mmtotal power requirement: kWweight of the machine ca.: 1 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

cutting diameter:520 mmsaw band length:7239 x 50 mmcutting width:520 mmsawing motor:5,5 kWcutting speed:20 - 130 m/mintotal power requirement:9,5 kWweight of the machine ca.:3,8 tdimensions of the machine ca.:3,5 x 2,2 x 2,1 m- Multifeed device- infeed roller stand- chip conveyor- automatic operation

The column saw is designed to cut metals from aluminum and its castings, through non-ferrous metals, to high-quality metals such as stainless steel. The saw has a stable structure and reliable technology for automatic material feeding and cutting, which only takes place at an angle of 90°. The saw is also equipped with a cooling system, which is responsible for cooling, lubrication and protection against corrosion of tools and cut elements. The main materials cut on a frame saw are profiles, shafts, pipes, rods, angles, C-sections, T-sections and other shapes. Producer: KASTO Model HBA-420 Cutting area approximately 420 mm Square cutting surface 420x420 mm Material feeding with automatic 600 mm Multi-material feeding 9999 mm Cutting speed continuously 20-130 m/min Total drive power 8 kW The driving power of the saw engine is 5.5 kW Stepless regulation of pressure reduction ...

cutting diameter:520 mmsaw band length:7239 mmcutting width:520 mmsawing motor:5,5 kWcutting speed:20 - 130 m/mincutting width at rectangle material:520 mmtotal power requirement:9,5 kWweight of the machine ca.:3,8 tMachine with multi feed devicechip conveyorinfeed roller stand ... mais informação

Saw blade Ø: 400 mm Cutting range at 90° round: 130 mm Cutting range at 90° rectangle: 305 x 40 mm Cutting range in miter at 45° round: 130 mm Cutting area in miter at 45° rectangle: 245 x 40 mm Cutting speed: 10/20 m/min Drive motor: 380 V, 1.7/2.6 kW Space requirement: 1100 x 1000 x 1900 mm Weight: 700 kg

saw blade diameter:400 mmcutting diameter:400 mmmaterial:Vollmaterial 20 - 130 mmmaterial:Walzprofile 40 - 120 mmmaterial diameter from - to::Rohr u. Profilfrohr bis 100 x 14 mmsawblade width:4 mmtotal power requirement:5,1 kWweight of the machine ca.:1850 kgdimensions of the machine ca.:3300 x 1630 x 1960 mmDocuments:vorhanden

cutting diameter: max. 250 mmfeed:: . accessories:: Ersatzbänder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

saw blade diameter: 450 mmstroke: mmtotal power requirement: kWdimensions of the machine ca.: mcutting diameter: mmweight of the machine ca.: 2 tcutting range round 220mmcutting range square 470mm x 30mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

roll diameter: 420 mmthroat: 410 mmworkpiece height: 295 mmcutting speed: 12 - 375 m/mintable surface area: 600 x 600 mmsaw band length: 3150-3260 // 3-16 mmwork height max.: 1020 mmvoltage: 380 Vtotal power requirement: 1,1 / 1,7 kWweight of the machine ca.: 620 kgdimensions of the machine ca.: 1000 x 800 x 1900 mm from a maintenance workshop - good condition ()Furnishing:- Butt welder IDEAL BSO / 16 with scissors and whetstone- 4 gear stages + 2 engine speeds- Belt guide height adjustment with handwheel- Working table tiltable +/-45°- Working table tiltable 10°- Machine baseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Automatic band saw Manufacturing year: 1988 Automatic feed max stroke: 5400 mm Hydraulic blade tension Cut counter Variable speed: 15-120 m / min Chip conveyor Documentation ... mais informação