serras usadas para venda

throat: 1800 mmworkpiece height: 750 mmTravel: 4000 mmtable width: 5500 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

saw blade diameter:400 mmtotal power requirement:380V, 10A dimensions of the machine ca.:1 x 1 x 2 m ... mais informação

Cold circular saw, metal circular saw, mitre saw, circular saw, sawing system-Manufacturer: Kaltenbach, cold circular saw metal circular saw type RKT 631 HG with roller conveyor left / right-Stop length: 1000 mm-Max. saw blade diameter: 710 mm-Drive power: 3.0 / 5.0 kW-Rotating base adjustment: continuously left/right-Cutting area at 90 degrees flat: 400 x 120 mm / round Ø 220 mm-Cutting area at 45 degrees flat: 250 x 80 mm / round Ø 180 mm-Cutting speed: blade diameter 710 mm 11 / 22 m/min.-Saw blade feed speed: continuously variable 0 - 1000 mm/min-Accessories: incl. 2nd saw blade-Roller conveyor left: total 3500/1060/H1100 mm / weight 378 kg-Roller conveyor right: total 3960/1370/H1390 mm with stop / weight 670 kg-Dimensions saw: 1670/1760/H2020 mm / Weight 2340 kg-Total weight: 3381 kg

Cutting length: 5000 mm blade diameter: depending on need 420-550 mm saw aggregate pneumatic swivel 45-90° Blade drive: 380 V, per 3 kW space: 6400 x 1400 x 1700 mm weight: approx. 1600 kg  ... mais informação

Connected load: 0.9kW, weight: 170kg, including instruction manual, three saw blades for V2A and five saw blades for steel, the lowering hydraulics should be overhauled. ... mais informação

Technical data: - Cutting range at 90° around 260 mm - flat 450 x 240 mm - Cutting range at 45° around 230 mm - flat 240 x 200 mm - Machine is mounted on original turnstile - Saw band dimension 3660 x 25 x 0.9 mm - Cutting speeds 20 / 35 / 50 / 70 m/min - Hydr. lifting + lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 0.8 kW - Coolant device - Space requirement approx. W 2100 x H 1200 x D 1000 mm - Weight approx. 500 kg

offer 22543 Specifications: - Saw blade dimensions 350 x 3.2 x 40 mm - Saw blade speed 3200 rpm - Cutting range at 90° 115 mm - 115 x 120 mm - 200 x 80 mm - Miter adjustable left + right - Drive 400 V / 2.0 kW - Space requirement approx. W 700 x H 1500 x D 900 mm - Weight machine approx. 80 kg - with: - Saw blade - Clamping pole - Stop rail 3000 mm

Meba 310 GHSS metal band saw machine. Year: 1992 With 2 pieces conveyor belt. Technical advantages: horizontal hydraulic miter band saw cutting diameter 320 mm cutting width 450 mm cutting area: at 90 degrees: flat 450 x 220 mm at 45 degrees: round 300 mm at 45 degrees: flat 300 x 200 mm at 60 degrees: around 200 mm at 60 degrees: flat 160 x 140 mm cutting speed stepless: 18-115 m/min. motor power 1,5 kW saw blade dimensions 3800 x 32 x 1,1 mm weight: about 750 kg dimensions: L 1,77 x W 1,69 x H 1,2 m

cutting diameter: 260 mmsaw band length: 3660 mmcutting width: 0,9 mmcutting range - square -: 260 x 260 mmfeed length: 500 mmfeed length: multiple: 5.999 mmcutting speed: 17 - 106 m/mindimensions of saw-band: 3660 x 25 x 0,9 mmsawing motor: 1,5 kWtotal power requirement: 2 kWweight of the machine ca.: 1,05 tdimensions of machine L x W x H: 1,75 x 1,80 x 1,15 mAccessories: coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 260 mm: 260 mm: mmsaw band length: 4115 x 32 x 0,9 mmtable height: 950 mmband speed: 15 - 125 m/minControl: NC total power requirement: 6,5 kWweight of the machine ca.: 2,0 tdimensions: 2,1 x 2,1 x 2,0 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

cutting diameter: 260 mmsaw band length: 4115 mmcutting width: 260 mmcutting range square: 260 x 260 mmheight of material-table: 950 mmmaterial feed: 600: 3x reversierbar mmmultiple feed until: 1800 mmdimensions of saw-band: 4115 x 32 x 1,1 mmcutting speed: 15-125 m/minpower capacity saw: 4 kWcontrol: Minipos 807 min. cut-off length: 6 mmRemaining piece length: 10 / autom. 110 mmtotal power requirement: 6,5 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2,09 x 1,9 x 2,03 mCondition: ready for operation: Video(s) available on our website.: Electric 380 Volt: Chip conveyor: Cooling equipment: Material feed: NC fully automatic band saw with vertical saw band run (saw unit offpolymer concrete), cutting area around 260 mm, control Minipos 807,Clamping pressure regulation of the vices by means of a hand wheel and manometer, stepless cutting speed and cutting feed manually ...

Technical data: -Saw blade size 300 mm -Blade rotation speed 2800 RPM -Section - 90 ° 160 x 20 mm 100 x 80 mm -at 45 ° 100 x 40 mm -Adjustable miter vise -Drive 380 V / 1,5 kW - space requirement approx. B H 400 x 1400 X 700 mm -Weight approx. 80 kg -with:-vert. -Vice - machine stand -Feed roller 2000 mm -Evacuation roller conveyor with MaÃ? attack with analog display via Handwheel movable 3100 mm

Manufacturer: Behringer Type: HBP 220 A Year of construction: 1993 Condition: very good Cutting speed: max. 120 m/min  ... mais informação

Uniz TC-280 manual band saw. Cutting capacity: 280mm. Power: 1,5cv.  ... mais informação

Max. cutting length: 3,900 mm Max. saw blade diameter: 500 mm Automatic positioning via Beckhoff control system Minimum Quantity Spraying Device Pneumatic material clamps Mitre cuts possible on both sides 2-hand operation  ... mais informação

This Wagner WPB 340 A Sawing machine was manufactured in the year 1993. ... mais informação

Saw Type ON 254  ... mais informação

cutting diameter: 260 mmsaw band length: 4310 x 27 x 0,9 mmtable height: -- mmcutting speed: 17 m/mintotal power requirement: 3,2 kWweight of the machine ca.: 920 kgdimensions of the machine ca.: 2,5 x 1,7 x 1,5 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

offer 22492 Specifications: - Cutting range at 90° approx. 280 mm - flat 410 x 200 mm - Cutting range 45° approx. 230 mm - flat 245 x 210 mm - Band saw blade dimensions 3660 x 25 x 0.9 mm - Material replenishment machine - Cutting speeds infinitely variable 17 to 106 m/min - Hydr. raising + lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 1.1 kW - Coolant device - Stop 1000 mm - Space requirement approx. W 2000 x H 1200 x D 1000 mm - Weight approx. 380 kg

Cutting diameter 280 mm Cutting area at 90 degrees: 360 x 180 mm Cutting range at 90 degrees: square 280 x 280 mm Cutting range at 45 degrees: approx. 180 mm Band saw dimensions: 3830 x 25 x 0.9 mm Material support height: 500 mm Machine weight approx. 500 kg Dimensions: 2800 x 850 x 2350 mm (LxWxH)