Fabricante:
(Categoria: 1300)
Unit for painting booth: Make : Wolf Built: 1992 / 2002 Dimensions: 1.5 m x 5.0 m x 2.9 m (approx. WxLxH) Heating unit: 160 kW, hot water exchanger Dry temperature: 60 degrees C Supply air unit: 21,500 m3/h; 7.5 kW; 1500 rpm Exhaust unit: 21,000 m3/h; 7.5 kW; 1500 rpm Speed control: with frequency inverter Electrics : Control cabinet Unit for double drying cabin, double dryer: Dimensions: 1.2 m x 1.6 m x 3.0 m (approx. WxLxH) Heating unit: 140 kW, hot water exchanger Dry temperature: max. 60 degrees C Circulating air unit: 12,000 m3/h; 5.5 kW; 1500 rpm Location : Nuremberg Warehouse Sell price: € 9,990,-, net from location We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.
Serial Number: 131BMA-328 Construction year: 1992 Weight: 2,5 tons Power: 6 kVA Air pressure: 6 bar Length mm: 450 Width mm: 350 Height mm: 350 Working height: 90 cm Transport size L x W x H: 4,5 x 2,5 x 2,5 Min.-max glass size: 321 x 255 Condition machine : Perfect Control type: Relay Electric. Connection: Relay Missing parts: None Documentation: No Instructions: Not necessary Electric diagram: Yes Parts list: Yes Photos/film available: Photos available for more information, please mail us: salestecfort.nl
Infeed and Outfeed roller conveyor transport system for material lengths 2.5-14m Entrance dimensions- 2100 x 600mm The machine can process a plate of 2000mm wide and min. 5mm thickness Transport weight of max 1000 kgm Number of Turbines- 6 Turbines of C-380 11 kW Turbine Power Average speed at BSa 2 12- 1-1.5 mmin Abrasive hopper with screw conveyor 2.2 kW Abrasive used- Round low carbon sheet shot or cut wire Buck elevator with a 5.5 KW gear motor and a broken belt detection sensor Machine with Brush blow off plant Machine equipped with screw conveyor Automatic height adjustment for the brush Automatic adjustment for the 4 outer turbines
Capsuling machine NORTAN – UNICAP 35 Year: 1993. Speed: 2.500 bph. Direction: Clockwise. Capsules distribution with plateau system. Single thermal head for PVC capsules. Safety protections. ... mais informação
Inv. Num. : 6932 Type: Harrier Producer: Svecia Created: 1993 Parameters: In good technical condition. ... mais informação
power capacity:110 kWfeed pressure:10 barNumber of working hours:11 372 / Lastst. 7436 hvolume capacity:16,75 m³/mintotal power requirement:110 kWweight of the machine ca.:2,3 tdimensions of the machine ca.:2400 x 1630 x1820 mm ... mais informação
Balance range: 300 g Temperature range: 10° - 40° C Mains connection: 220 V, 50 Hz ... mais informação
Corker BERTOLASO – DELTA 506 • Year: 1993. • Speed: 9.000 bph. • Direction: Clockwise. • 6 heads. • Natural straight cork. • Safety protections. ... mais informação
Corker BERTOLASO – DELTA 506 S • Year: 1993. • Speed: 7.000 bph. • Direction: Clockwise. • Model: DELTA 506 S. • 6 heads. • Natural mushroom cork. • Safety protections. ... mais informação
technical details: - Position: GL 360 (pos. 1) - Speed: 1,450 rpm = slow speed - Volume flow: 6,500 m³/h - Size: 355/4 - Power: 11 kW - Pg: 230 for air at +20°C and density = 1.2 kg/m³ - Voltage: 380/600 V (triangle/star) - Current: 22.5/13 A - Frequency: 50 Hz - Weight: 323 kg Metrics: - Housing (H x W x D): 1,475 x 800 x 1,260 mm (incl. motor) - Diameter suction nozzle (suction side): 380 mm - Diameter pressure connection (pressure side): 320 mm Transport dimensions (H x W x D): 1,630 x 800 x 1,200 mm (on EURO pallet) The fan was completely refurbished and painted in our house. Among other things, the motor shaft bearings were renewed. (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.
technical details: - Position: GR 360 (Pos.5) - Diameter suction nozzle: 300 mm - Diameter pressure nozzle: 280 mm - Volume flow: max. 4,600 m³/h - Pg : 275 for air at 20°C and ρ =1,2 kg/m³ - Steel impeller straight + + + New engine + + + electrical connection: - Motor manufacturer: SEVA Tec - Motor power: 7.5 kW - Voltage: 400 V - Current: 14.3 A - Frequency: 50 Hz - Speed: 1,450 rpm - Dimensions (H x W x D): approx. 1,580 x 1,380 x 760 mm - Transport dimensions (H x W x D): 1,800 x 1,400 x 800 mm (on EURO pallet) - Weight: 400 kg The fan has been cleaned and checked for correct functioning. The engine was renewed and the impeller balanced. (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.
technical details: • Position: GL 360 (pos. 1) • Diameter suction nozzle: 200 mm • Diameter pressure connection: 200 mm • Volume flow: 3,380 m³/h • Pressure increase: max. 2,000 Pa • Steel impeller: straight • Dimensions (H x W x D): 1,080 x 560 x 700 mm (incl. motor and nozzles) electrical connection: • Engine manufacturer: VEM • Motor power: 3.0 kW • Voltage: 380 V • Current: 6.15 A • Frequency: 50 Hz • Revolution: 2,840 rpm Transport dimensions (H x W x D): 1,230 x 1,200 x 800 mm (on EURO pallet) The fan has been mechanically and electrically tested and has been repainted. (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.
System includes (1) Filling Machine, number of filling stations: 4, format: 100-1000ml, with piston stroke (2) Capper Kugler K 708, year of construction: 1993. ... mais informação
Qty. 1 Second-hand aluminium foil rolling mill plant Mfc.: Marudhar, Sambhav Built: 1993 - 2012 Revamped: 2015 Foil width: 1000 mm Entry thickness: 8 mm Exit: 8 microns Consist of: Melting furnace 22 MT Holding furnace 15 MT Strip caster Roughing rolling mill Intermediate foil mill Finishing foil mill Heavy slitter Strip slitter Foil separator Qty. 2 Foil slitters Annealing furnace
Make : Wolf Built: 1993 Dimensions: 1.3 m x 1.0 m x 2.6 m (approx. WxLxH) Heating unit: 140 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air unit: 12,000 m3/h; 5.5 kW; 1100 rpm Sales price: € 2,950,- net, from stock Herzogenaurach We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.
Description: Belt width: 800mm Inlet height: 50mm Sections: 1st heating 2. heating 3. ventilation 4. cooling Approx. Onsite Dimension. (l x w x h): 10,000 x 1,400 x 1,200 mm, weight approx.: 4,500 kg ... mais informação
Make : Wolf Type: WLE-S-180 Built: 1993 Dimensions: 1.3 m x 2.2 m x 2.6 m (approx. WxLxH) Heating unit: 209 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air unit: 14,000 m3/h; 7.5 kW; 1435 rpm Location : Camp Herzogenaurach Sales price: € 2,990,- net, from location This plant is already on sale, similar we have in stock. We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please contact us, tel. 0171-9508841.
Max. load: 5kg, weight: 350kg, including controls and documentation. ... mais informação