fresadoras usadas para venda

Selling the 6 units of these CNC Router KIMLA BPF2131 machines. More technical specification in this link: https://kimla.pl/en/machines/industrial-cnc-routers All machines have manufacturer warranty ... mais informação

Motor power: 26,0-kW Year of construction:2020 Motor voltage:3x 400 V motor frequency:50 Hz Working field: X= 3090 mm, Y= 2100 mm, Z= 85 mm 3 different vacuum table zone DH8 cutting head 2 vacuum pump with a total suction of: 500 m³/h / 50Hz; Electro-pneumatic shaft 10 kW HSK F63 ... mais informação

Length 1360.0 Width 1180.0 Height 1400.0 Weight 750.0 ... mais informação

Very little used CNC machining center for wood and plastics. In addition, a chip extraction unit with 3 capacitive filters of 10 kw has been added. ... mais informação

AES Raptor Ultra 2128 CNC Nesting Machine Working Capacity : 2100 mm x 2800 mm Vacuum : Becker 250m3 Rotary Tool Changer : 12 Position X axis speed : 90 m/min Y axis speed : 90 m/min Z axis speed : 20 m/min Sweeping Discharge Automatic Tool Measuring 8 Zone Automatic Vacuum ... mais informação

Holzher EVOLUTION 7405 Machining Center 6 blade changer Machine is in excellent condition ... mais informação

Protective cover for framing curly parts on the ring etc. This protective device is often recommended by the BG. Maximum fraeser diameter 160mm With start-up ring, brushes and brake wedge for the start-up bearing Obviously hasn't been used much before. The machine can be demonstrated by appointment with us on site. We only offer machines that are ready for preparation in our warehouse, see "further offers from this supplier".

Description: 2200 W, 10000 to 22000 rpm, with various accessories, in plastic caseApprox. Onsite Dimension. (l x w x h): 500 x 400 x 400 mm, weight approx.: 10 kg ... mais informação

CNC machining center Biesse Rover A1542 Year of production 2021 Working fields : X = 4140 mm Y = 1560 mm Z = 275 mm C = 360 degrees 8 pcs. of ATS beams - 24 carriages 8 pcs. Rear line bumper, stroke 115 mm, extension 25 mm 8 pcs. Middle line bumper, mounted at 685 mm, stroke 140 mm 8 pcs. Front line bumper, stroke 1348 mm, extension 140 mm. 4 side bumpers with 140 mm stroke (2 left + 2 right) including pneumatic installation. 4 removable center bumpers with 140 mm stroke (2 Left + 2 Right) including pneumatic installation. BUSCH pump with a capacity of 290 m3/h Electro-spindle 13.2 kW (17.7 hp) HSK F63 and air cooling BH 29 2L drilling head with automatic lubrication. 16-position turreted tool magazine mounted on X-axis carriage 8-position magazine for quick tool change In addition, HSD angle aggregates The machine has only 2000 hours of operation

technical details: - Milling depth: 0 - 80 mm - Diameter suction nozzle: 60 mm - Swallow size: W-1/2/3 - Dimensions (W x H x D): 600 x 770 x 540 mm - Weight: 19 kg - Operation: manual - Workpiece clamping: manually via hand lever - Passage height: 110 mm Stop elements: -1 x Stump Stop - 1 x stop plate 45° (angle stop) - 1 x measuring scale (All settings are done manually.) Controls: - 1 x milling depth adjustment - 1 x workpiece clamping - 1 x chip breaker Motor data (milling unit): - Power: 0.5 kW (530 W) - Voltage: 230 V - Frequency: 50 Hz - No-load speed: 29,000 rpm The machine mills one keyway per work cycle for the above-mentioned dovetail sizes. All Hoffmann accessories can be used on this machine. (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once  ...

Spindle swivel: Yes -5 to 45Â; Height adjustment: handwheel; Swivel adjustment: handwheel; Milling jaw adjustment: manual; Altitude display: mech. Counter; Swivel angle display: digital; Milling Fence Display: Digital; Milling spindle diameter: 30 mm; Speeds: 3000, 4500, 6000, 9000; Motor power: 5.5 kW; Engine brake: Yes, automatic; Extraction port: 2 x 120mm; Machine length: 1800mm; Machine depth: 1400mm; Weight: 900kg;

Spindle swivel: No; Height adjustment: handwheel; Swivel adjustment: -; Milling jaw adjustment: manual; Altitude display: mech. Counter; Swivel angle indicator: -; Milling stop indicator: mech counter; Milling spindle diameter: 30 mm; Speeds: 3000, 6000, 7500, 10000; Motor power: 3.7 kW; Suction connection: 2 x 120 mm; Machine length: 900 mm; Machine depth: 800 mm; Weight: 20 0kg;

Spindle swivel: No; Height adjustment: handwheel; Swivel adjustment: -; Milling jaw adjustment: manual; Altitude display: mech. Counter; Swivel angle indicator: -; Milling stop indicator: mech counter; Milling spindle diameter: 30 mm; Speeds: 3000, 4500, 6000, 7000, 10000; Motor power: 7 kW; Engine brake: Yes, automatic; Extraction port: 2 x 120mm; Machine length: 2599mm; Machine depth: 900mm; Weight: 655kg;

Professional spindle grinding machine with iron table and tilting and thread cutting KUSING SFnc3 1200. Technical parameters: Power of the main engine: 3 kW (4 hp) Spindle diameter: ø 30 mm Spindle length: 140 (120) mm Stroke of the spindle: 170 mm Maximum tool diameter: ø 180 mm Tool speed: 3000/5000/8000 rpm The size of the iron table: 1020 x 700 mm Tilt: 0-45° Weight of the machine: 500 kg

Professional spindle grinding machine with aluminum sliding table and tilting device KUSING SFna 1200. Technical parameters: Power of the main engine: 3 kW (4 hp) Spindle diameter: ø 30 mm Spindle length: 140 (120) mm Stroke of the spindle: 170 mm Maximum tool diameter: ø 180 mm Tool speed: 3000/5000/8000 rpm The size of the iron table: 980 x 450 mm Size aluminium table: 1200 x 360 mm Tilt: 0-45° Weight of the machine: 320 kg Formatting trolley of the highest quality according to the principle of hardened rod guide (ALTENDORF principle) KuSING has been manufacturing woodworking machines since 1991.

Pallet production machine PALLETMAX line is from 2022 X stroke 3700.0 Y stroke 1700.0 Z stroke 160.0 ... mais informação

For sale cnc milling plotter with a new 2.2kW electrospindle controlled by software. The machine works on the Mach3 Usb controller. HGR15 linear guides with linear carriages on all axes. This significantly increases the service life and precision of the system compared to supported shafts. After welding, the frame was milled from one fastening at the place where the linear guides were installed. The milling machine is equipped with a backlash compensation system on the drive bars on the x and y axes. The machine is ideal for a carpentry modeling workshop or an advertising agency. Works on HPL, HDF, MDF, PLYWOOD, RUBBER, PMMA, WOOD, PVC, etc. The drive of the x and y axes is carried out using racks with a module of 1.5 and Steinhoff gears. On the axis with a ball screw fi 16 pitch 5mm. Mounted stepper motors with planetary gears guaranteeing better work resolution and dynamics of return ...

max. workpiece length: 4400 mmprofile spindle: 1 Stückmain drive: 19,2 kWControl: Beckhoff CNC machining center MASTERWOOD 4 WIN---------------------------------------------------------STOCK MACHINE: Immediately available!Specially designed for a rational and flexible wooden window u.door productionHIGHLIGHTS:- Different tool magazines for optimal tool loading- Simultaneous loading of 4 workpieces- Patented clamping system for optimal processing of the workpieces- CNC controlled work table with automatic positioning of beams andStretcher- Automatic re-clamping for changing between external and internal profiling- INTEGRATED window construction software, i.e. the machine does not have to (but canof course) can be controlled from the office with external industry software.- strong motor with 19.2 kW HSK-63 EPlease note that this stock machine is with us in Oberkochen andis already equippe ...

Condition: Brand New, tested but never used. Well-packaged. Includes: - ELITE Series Foreman (48 x48 Cut Area) - Spindle Mount Size 80mm - Stiffy Included - Onefinity 3-Axis XYZ Touch Probe - Dust Collection Kit ELITE Series The Jenny Infinite Possibilities set Makita Router Installation support will be offered via video call.

CNC milling machine 2132 OPTIMAT 2100x3200 ATC 100% European product New for 2022! CNC milling machine 2132 with a weight of approx. 4100 KG and a working table area of 2100x3200mm, equipped with an automatic 12th tool linear magazine cooperating with the HSD / HITECO 9kW 24000rpm electrospindle (ceramic bearing, HSK F63 interface) enabling the use of tools with a diameter up to 26mm inclusive! Technical parameters: Effective working size: 2100x3200mm - Trouble-free processing of the entire size of the furniture board - Vacuum workbench made of HPL Machine weight: approx. 4100KG - The frame of the machine made of the highest quality alloy is welded in its entirety, then subjected to the stress relieving process in a special chamber with special conditions, and then milled. This process ensures that excellent results of structural rigidity and stability are achieved Z-axis stro ...