retificadoras usadas para venda

STEMAS LEV PA9050 grinding machine - serial number 9050R 35599, - consists of: 1 aggregate, 1 grinding group with 2 aggregates, 1 ball Ø250 mm, 1 table with balls - width 550 x 5000 mm, - belt width 80 mm - dimensions in mm: approx. 5100 x 2100 x 2000, - weight in kg: approx. 1500, - year of construction: 1999

workpiece diameter:250 mmworkpiece length:1000 mmturning speeds:25 - 250 U/mintotal power requirement:19,5 kWCombined Tapes and Stone Superfinish Maschine in exzellent condition. This machine was designed for fully machined of V8 - TDI cam shafts.- 8 Staions with stone for camlobe - 5 stations with tapes for bearing seatIstallation of the line:- Stacking cell PROMOT- Linear gantry for loading the workpiece on the lift bar conveyor- Machine - Unloading with linear gantry ( oil whizzer installed ) - Washing machine AHRENS + BODE

Description: • Wide belt calibrating and sanding machine • Serial number AE/019301 • Total installed power approx. 18 KW • Sanding width approx. 1100 mm • Workpiece thickness from 4 mm up to 170 mm • Motorized height positioning • 2 feed speeds • Feed motor power 0.45 KW • Aggregate 1: grooved steel calibration roller with diameter approx. 180 mm • Aggregate 2: combined rubber roller and sanding pad • Both groups are driven by an 15 KW motorApprox. Onsite Dimension. (l x w x h): 2,700 x 1,700 x 2,250 mm, weight approx.: 1,700 kg

Heesemann MFA 8 Q-L Bw Transverse aggr., 12 + 24 m/s Longitudinal - Aggr., 10 + 20 m/s, sanding belt length 2620 mm x 1350 mm Cleaning brush: Ø=150 mm, Fibre Vacuum for small components Feed rate: 5 - 25 m/min Weight: 4,600 kg Current consumption: 94 A Machine is overhauled including electronic components and a new conveyor belt

SPECIFICATIONS: Max. grinding width mm: 1320 Max. machining thickness mm: 150 Sanding belt size mm: 2150 x 1150 Installed capacity KW: 15.0 (1 motor + 1 drive) Configuration: I. Group: 1 roller II. Group: 1 roller-shoe combination  ... mais informação

Working width max. 600 mm Workpiece thickness max. 150 mm Automatic measurement of the workpiece thickness Feed rate infinitely variable 2 - 12 m/min. Aggregate assembly: 1) Contact roller unit with smooth steel roller Drive motor 15 KW, pole switchable for 2 grinding speeds 2) Rubber contact roller unit with corrugated rubber roller Hardness 60 Shore drive motor 15 KW, pole switchable, this The motor also drives the downstream sanding shoe unit 3) Pneumatically controlled sanding pad unit Machine complete with small part return, designed as a transport curve, as a plate conveyor transport Machine weight approx. 1,800 kg Power supply: 400 V, 50 Hz, 3 Ph.

Description: Machine number: 93.436.23 Operating voltage: 400 V Frequency: 50 Hz Rated current: 63 A Connection: 38 kW Speed: min. 3000 rpm Control system: SIEMENS SIMATIC C7 624 Working range: Working height: 750 - 850 mm Working width: 1100 mm Max. workpiece height: 100 mm Minimum workpiece height: 0.8 mm Space required for belt change: approx. 1650 mm Sanding belt speed: approx. 20 m/s Sanding belt dimensions: 1150 x 1900 mm Conveyor belt speed: 2 - 15 m/min Conveyor belt dimensions: 2400 x 1100 mmApprox. Onsite Dimension. (l x w x h): 1,800 x 1,600 x 1,900 mm, weight approx.: 1,850 kg

Manufacturer: Costa Lackschleifmaschine, Type: C 1350, Year: 1999, Control: Costa, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 1, Sanding belt dimensions: 2620 X 1350, Rubber roller: yes, Shore roller 1: 40, Band 1 Leistung kW : 36, Band 1 Schleifbandgeschwindigkeit m/s : ca.5-20, Intermediate sanding of lacquer: yes, Constant table hight: yes, Vacuum table: yes, Noise enclosure: yes, Workpiece emitting device nozzles: yes, Year :1999

Manufacturer: Costa, Type: SbF, Year: 1999, Control: Costa, Sanding width mm: 1350, Sanding hight mm: 3-150, Number of sanding belts: 1, Sanding belt dimensions: 2620 X 1350, Table hight adjustment by engine: yes, Rollers: 1, Rubber roller: yes, Shore roller 1: ca.35, Längsschleifaggregate: 11, Belt 1 shoe unit: regelbar, Band 4 Schleifbandgeschwindigkeit m/s : yes, Table hight adjustment by engine: yes, Elektronische Tastung mm: 5-25, Separation of sampling in mm: 0,25, Continous adjustable feeding speed m/min: yes, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Constant table hight: yes, Year :1999

Manufacturer: Costa, Type: SbF , Year: 1999, Sanding width mm: 1350, Sanding hight mm: 3-150, Number of sanding belts: 1, Rubber roller: yes, Band 1 Leistung kW : 15, Transportbandantrieb kW: 1,1, Brushing unit: yes, Year :1999 ... mais informação

Description: • Wide belt sanding machine • Serial number SA/003937 • Sanding width approx. 1350 mm • Workpiece thickness from 4 mm up to 170 mm • Vacuum transport belt, F.LLI FERRARI vacuum unit power 11 KW • Belt conveyor with variable feed speed • Feed motor power 4 KW • Aggregate 1: EPICS TA-46 transversal sanding belt driven by an electronic sectioned pneumatic pad: 46 sectors, sanding belt dimensions 6550 x 150 mm, motor power 11 KW • Aggregate 2: EPICS K-RP 46 combined roller and sanding pad aggregate: roller diameter 220 mm, 46 sectors,sanding belt dimensions 2620 x 1370 mm, motor power 18.50 KW, with blowers • Aggregate 3: EPICS PE-46 electronic sectioned sanding pad: 46 sectors, sanding belt dimensions 2620 x 1370 mm, motor power 15 KW, with blowers • Aggregate 4: brush unit • HYDRA RTC electronic management control, Windows environment • Dimensions for ...

Working width: 1110 mmWorkpiece thickness: 3 - 150 mmsanding belt dimensions 1120 x 1900 mmcombination roller and pad 11 kWSegmented pad, segment width 50 mmFeedbelt speed 2.5 - 13 m/min ... mais informação

grinding length: 1320 mmgrinding width: 730 mmweight of the machine ca.: 4,5 tworkpiece height: mmtotal power requirement: kWdimensions of the machine ca.: mautomatic infeeddigital read-outelectro magnetcoolant device with paper filteringdressing deviceTechnische Daten / technical details:gr. Schleiflänge / max. grinding length 1320 mmgr. Schleifbreite / max. grinding width 730 mmVertikalbewegung / vertical travel 480 mmSchleifscheibe/grinding wheel 350x50x127 mmMagnetgröße / electro magnet size 1200x600 mmGewicht ca. /weight ca. 4500 kgTechnische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich -Technical data, accessories and description of the machine are not binding.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fabr. UniSanding built year 2000 with 2 x motors 2.3 Kw with 2 brushes Arb. Width -1300 mm Arb. Height 130 mm Constante table with Vackum  ... mais informação

Manufacturer: Quickwood, Type: RO 1300/1T, Year: 2000, Control: yes, Number of units: 1, Working widht mm: 1300, Through running hight max mm: ca. 100, Through running hight max mm: ca. 100, kW output motor: ca. 3, Weight approx. kg: 1500, Required space L x W x H mm: 2180x1850x2100, Year :2000 ... mais informação

- 2 belt aggregates with adjustable angles, - pneumatic belt tensioner, - belt oscillation, - strip blowing, - 1 brush unit, flader, - smooth speed control on each of the aggregates, - smooth feed control, - the machine is in continuous operation. Clean edges quickly and thoroughly The machine is suitable for sanding primer

Band width: 150mm; Table size: approx. 2500mm x 800mm; Suction port: 140mm; Motor power: 3kW; Machine length: approx. 3400mm; Machine width: 1200mm; Weight: 400kg; Robust design also allows the machining of longer workpieces grinding unit swivels, thus can also be used as an edge grinding machine225 mm large balanced belt rollers ensure low-vibration drive.Easy adjustment of the abrasive beltHigh belt speed of 17 m/sright-counterclockwise rotationUpper sanding sole with graphite coating4-ply sprung sanding padWith movable sanding pad for oblique surfacesSmooth-running grinding table even under high loads due to heavy workpiecesOptimal price-performance ratio

WEINIG Rondamat R 960, high-precision knife sharpening machine for sharpening and production of profile knives from a solid blanket according to a template, as well as Resharpening of straight planer knives in the cutter head • Grinding length / tool width max. 240 mm • Grinding mandrel holder D = 50 mm • Tool flight circle / tool diameter min. 100 – max. 300 mm • Grinding wheel diameter for profile heads min. 150 / max. 225 mm • Grinding wheel diameter for planer heads 150 mm • Grinding wheel width (ceramic, borazone, diamond) 2 – 3 – 4 – 10 mm • Grinding wheel bore 60 mm • Clear-angle grind radial on the back of the knife 10° – 30° • Clear-angle grinding laterally in manual mode 0° – 20° • Clear-angle grind for straight cutter heads 60° • Grinding spindle drive 1.1 kW / 400 V / 50 Hz • Coolant tank approx. 50 litres • Motor co ...

WEINIG Rondamat R 960, high-precision knife sharpening machine for sharpening and production of profile knives from a solid blanket according to a template, as well as Resharpening of straight planer knives in the cutter head • Grinding length / tool width max. 240 mm • Grinding mandrel holder D = 50 mm • Tool flight circle / tool diameter min. 100 – max. 300 mm • Grinding wheel diameter for profile heads min. 150 / max. 225 mm • Grinding wheel diameter for planer heads 150 mm • Grinding wheel width (ceramic, borazone, diamond) 2 – 3 – 4 – 10 mm • Grinding wheel bore 60 mm • Clear-angle grind radial on the back of the knife 10° – 30° • Clear-angle grinding laterally in manual mode 0° – 20° • Clear-angle grind for straight cutter heads 60° • Grinding spindle drive 1.1 kW / 400 V / 50 Hz • Coolant tank approx. 50 litres • Motor co ...

Manufacturer: Evimatic, Type: HF 82 CB, Year: 2000, Control: yes, Control: yes, Work piece width min-max mm: min. 200, Schleifaggregate rechts : 2, Unit 1 tiltable: yes, Aggregat 1 kW: ca. 1,5, Unit 2 slewable: yes, Aggregat 2 kW: ca.1,5, Number of frequency controlt belts: 2, Brushing unit: 1, Total lenght mm: 2500, Year :2000