mandriladoras, centros de usinagem usadas para venda

number of spindles: 12 bore capacity in steel (diameter): 20 mmbore stroke: 100 mmtotal power requirement: 9 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 1,5 x 1,5 x 2,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

C.W. Kreher Söhne KG slotted hole drilling machine LBFM Product name: Slotted hole drilling machine Type: LBFM I and II Manufacturer: C.W. Kreher Söhne KG Machine number: 4638 Year of construction: 1963 Condition: used, revised, checked Technical details: • Table size: 600 x 250 mm • Absorption sizes of the two-jaw chuck: • max. drilling depth: 160 mm • Max. travel in width: 200 mm • Height adjustment: 200 mm • Max. speed: by flipping the belts 2 speeds: 1,500 rpm and 2,800 rpm • Stop for 2 drilling depths • Clamping device: mechanical hold-down devices • V-belt dimensions: 15 mm x 970 mm • Weight: approx. 500 kg Special features: Instruction manual available Engine data: • Voltage: 380 V •Turn: • Current: 6.1 A • Power: 1.6 kW Machine dimensions (L x W x H): 1,200  ...

- Machining width max. 800mm - Workpiece thickness Max. 80mm - for further technical data see PDF  ... mais informação

Chain resisters L x W x H: 1.2 x 0.8 x 2.2 m Weight approx. 480 kg Year of construction 1977 The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Description: • Multi drilling machine, dowel drilling machine • Serial number 207/78/2 • Total installed power 6 KW • Maximum distance between vertical heads approx. 700 mm • Minimum distance between vertical heads approx. 160 mm • 1 x horizontal drilling head with 20 spindles, pitch 32 mm, maximum drilling depth approx. 70 mm • 2 x vertical drilling heads with 15 spindles each, pitch 32 mm, motor 1.47 KW • 2 pneumatic clamps • Accioning by pedal • Dimensions for transport 1550 x 1550 x 1700 mmApprox. Onsite Dimension. (l x w x h): 1,550 x 3,200 x 1,520 mm, weight approx.: 800 kg

In-line hole drilling machine Scheer DB 4 L x W x H: 1500 x 1500 x 1900 mm Weight approx. 1000 kg Built in 1980 1 aggregate vertically up 1 aggregate horizontal - vertically pivotable The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Working length: 1,800 mm equipped with: -2 drilling units with three drills -Insertion device for pot hole hinges -2 Bohraggregte for hinges, etc.  ... mais informação

Dowel Hole Drilling Device: Yes; Drilling depth: 145 mm; Slotted hole length: 240 mm; Height adjustment: 135 mm; Motor power: 1.5kW; Speed: 2800 rpm; Extraction connection: 100 mm; Machine length: 1280 mm; Machine width: 960 mm; Weight: 200 kg; Solid slotted hole drill with 1 lever operation.

spindle speed: 23; drilling distance: 32 mm; motor power: 1,5kW; drilling unit: swivel; The universal dowel hole drilling machine Ganner enables the drilling of bodies, frame connections, drawers, door panels, rows of holes or hole groups as well as the drilling of cabinet fittings. ... mais informação

BIESSE - Multi-spindle drilling machine Model BEAVER Year 1982 Manufacture Biesse S.p.A Italy S/N 312/82 Technical data 1 horizontal drilling unit, 21 spindles 2 vertical drilling units, 2x10 spindles, pitch 32 mm horizontal Drilling motor 2.2 kW Vertical drill motor 2 x 1.5 kW Spindle speed 2800 rpm Blade dimensions 10x1.5 mm Operating pressure 0> 6 MPa 7 pcs. pneumatic answers with kSsi control levers Weight 865 kg L x W X H 280cm x 150cm x 150cm

Manufacturer: Koch, Type: DL 80, Year: 1982, Control: Elektrisch, Work bays: 1, Work piece thickness mm: 40, Werkstücklänge mm: 180-2500, Work piece depth mm: 800, Work piece thickness mm: 40, Feeding speed m/min: 60, Mittenunterstützung: yes, Lochraster: 32, Beleimwerkzeuge: 12, Dovel insertion: yes, Work piece clamping: pneumatisch, Work stations: 1, Wight approx. kg: 3000, Year :1982

Description: Maximum workpiece size: 600 mm . Table depth: 320 mm Spindle Quantity: No. 35Approx. Onsite Dimension. (l x w x h): 1,500 x 1,200 x 1,500 mm, weight approx.: 700 kg ... mais informação

Kettenstemmer GF L x W x H: 120 x 70 x 270 cm Weight 570 kg Baeqvhtqms Year of construction 1983 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Line boring machine Ayen with 32 mm grid Bahvy3bjt2 with attacks Pneum.. Holders Motor 0.55 kW L x W x H: 250 x 80 x 200 cm Weight 420 kg Year of construction 1983 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Manufacturer: Biesse, Type: Beta, Year: 1984, Control: Elektrisch, Work bays: 1, Working length max mm: 3200, Working lenght min mm: 180, Dovel diameter mm: 8, Dovel lenght mm: 30, Number of doveling tools: 7, Lochraster: 32, Dovel insertion: yes, Work piece clamping: yes, Pneumatic clamping: yes, Work stations: 1, Wight approx. kg: 2500, Year :1984

Manufacturer: Koch, Type: BD 60, Year: 1985, Control: hand, Work piece width min-max mm: 30-600, Min.-max. workpiece length in mm: 250-2500, Min.-max. workpiece height in mm: 10-45, Drilling support horizontal: 2, Bohrgetriebe horizontal Stk.: 4, Drill support from top: 2, Bohrgetriebe von oben Stk.: 4, Bohrsupporte von hinten: keine, Working range max mm: 60, Bohrgetriebe gesamt Stk: 8, Raster mm: 32/64, Drilling engine kW: 1,2, Working range max mm: 60, Dovel units: 6, Dovel insertion: yes, Dovel diameter mm: 6 X30, Pneumatic clamping: yes, Work stations: 2, Manufacturer: Koch, Year :1985

Manufacturer: Koch , Type: Sigma, Year: 1985, Min.-max. workpiece length in mm: 1800, Drilling support horizontal: 1, Bohrgetriebe horizontal Stk.: 1, Drilling supprt from bottom: 1, Bohrgetriebe von unten Stk.: 2, Working range max mm: 60, Raster mm: 32, Number of drill spindles: Horizontal 21<CRLF>Vertikal 2 x 9, Working range max mm: 60, Manufacturer: Koch , Year :1985

Drilling machine Brand: Flott Type: TB 10 Year: 1985 Drilling depth 23 mm Motor power 0,52 kW 380 volt 50 Hz 1,6 ampere Note: The specifications and descriptions are a copy of the order confirmation at that time. Data are for information and are not binding. ... mais informação

table diameter: 500 mmtable load: x ttable height: x mmspindle diameter: 0 mmx-travel: 500 mmy-travel: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

C.M.S. CNC Turret Head Machining Center Model TRIAX R-65 Sn 285, 1986 IBH controller modus 1 (2) vacuum tables- each 48” deep x 60” long. (1) five station lathe section. Max. part 6.5” x 45” (2) vacuum pumps 5 hp. each. Total of (30) routers. (6) station turret with (5) routers per station. Consisting of; (2) stations of (5) routers each - 2 ½ hp. each. (4) stations of (5) routers each – 8 hp. each. Digitizing table for flat work or carving. Lathe section for spindle work (fluting, carving). Unit complete with extra parts and lots of tooling.