outras máquinas de manutenção mecânica usadas para venda

Hydraulic power pack, hydraulic pump, hydraulic pump-Max. Pressure: 60 bar-Liter output: 5.5 l/min-Hydraulic tank: 450/320/H320 mm-Motor: 0.75 kW 1400 rpm-Hydraulic valve-Pressure relief valve-pressure clock-Dimensions: 520/330/H600 mm-Weight: 100 kg ... mais informação

Scissor lift table, scissor lift table, scissor lift, scissor lift -Load capacity: 500 kg -Platform: 5000 x 800 mm -Height retracted: 250 mm -Height extended: 1050 mm -Max. Stroke: 800mm -Own weight: 400 kg ... mais informação

Side channel pump, feed pump -Self-priming pump -Coupling -Order No.: 32175/90 ... mais informação

Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle-Manufacturer: Mannsmann Demag, electric chain hoist without chain and load hook-Type: PKV1-V1-F4-Load capacity: 125/250 kg-Main lift: 8/4 m/min-Fine stroke: 2/1 m/min-Number: 2x chain hoist available-Price per piece-Dimensions: 230/200/H235 mm -Weight: 15 kg/pc.

Cooling conveyor belt, cooling belt, conveyor belt, belt conveyor belt, conveyor belt, belt conveyor -Frame: made of stainless steel VA -without control -Belt width: 800 mm -Length below: 8500 mm above: 7300 mm -Dimension: 8500/1600/H2200 mm -Weight: 2000 kg ... mais informação

Electric chain hoist with travel motor for steel beams, hoisting capacity: 1.000 kg, hoisting speeds: 5,4 m/min. (fast); 1,4 m/min. (slow), incl. Pedestrian control, without steel beam. Brake and drives revised / function checked.  ... mais informação

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, injection molding machine, injection molding machine, plastic injection molding machine, plastic injection molding machine, plastic injection molding press-Manufacturer: Flutec, hydraulic unit from injection molding machine Battenfeld-Type: PT-350/2.3/M/ FL 83-Motor: ABB 11 kW / 1455 rpm-Individual components: see photos-Dimensions: 980/610 / H490 mm-Weight: 184 kg

Conveyor screw, screw conveyor, conveyor technology, pipe conveyor screw, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, screw dryer, drying system, belt dryer for digestate, grain, wood chips, sewage sludge-Screw was designed for a heating plant to discharge the ashes and was not yet in use-Screw tube and screw are double-walled and can therefore be cooled or heated-Execution: stable-Inlet: 1380 x 340 mm-Spout and control flange: Ø 360 mm-Screw and body made of: 30W02/3-without motor-Screw diameter: 300 mm-Diameter screw tube: 220 mm-Length of screw: approx. 7600 mm-Infeed pitch screw: 55 mm-Outlet slope auger: 215 mm-Dimensions: 9050/610/H1100-Weight: 2600 kg

Hydraulic pump, oil pump, gear pump, vane pump, hydraulic unit-Manufacturer: Brueninghaus, hydraulic pump type ...OVS 0 28 DFR/30 R-PPA 12 N 00-Pump: nominal pressure 250 bar-Drive: Behncke QU FA 00L4B-41-Power: 3 kW 1442 rpm-Dimensions: 620/300/H270 mm-Weight: 50 kg ... mais informação

Lifter Papa Withforce WE 3616 Lifting height 2500 mm Load capacity 1600 kg Load center 800 mm with charger Battery needs to be replaced L x W x H: 2.0 x 1.5 x 2.5 m Year of construction 1992 Weight approx. 1000 kg The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Scissor lift table, scissor lift table, scissor lift, scissor lift -Load capacity: 500 kg -Platform: 2200 x 1000 mm -Retracted dimension: 450 mm -Measure extended: 600 mm -Attention stroke only: max. 150 mm -without control -Number: 7x lifting tables available -Price: per piece -Own weight: 700 kg/piece

Adjustable traverse, crane traverse, indoor crane, workplace crane, crane hook traverse, load traverse, leveling traverse, beam traverse-Manufacturer: Pfeifer, crane traverse for transporting a wide variety of loads-Type: 04.315.063.063-Load capacity: 6300 kg-Length: 6410mm-Dimensions: see photo techn. drawing-Total dimensions: 6410/480/H960 mm-Own weight: 505 kg

Tilt tray sorter 2x 80 targets – second-hand - : Price on request! Manufacturer: Kosan Crisplant a/s Type: S2000-750 Year of construction: 1993 Sorter: Total length of the entire loop: 168.75m Number of changeovers: 80 Number of erecting units: 2 set Number of linear motors: 7 Number of bowls: 225 Shell pitch: 750mm Shell width: 700mm Speed: 1.5m/s 2 Scanners 160 slides 4 Infiltrations Number of sorter targets: approx. 2 x 2 x 40 targets (sorted to the right and left) Linus based controls Smallest size: approx. A4 x 8cm Maximum size: approx. boxes of 60 x 60 x 80cm Sorting capacity approx. 6 - 10,000 / hour Condition: good Available from. ca. Mid-2024 (possibly earlier on request) Location. Area Berlin More photos, videos and plans on request!

Manufacturer: Mucki Year of construction: ca. 1993 So far at an automobile manufacturer in use in a plant for feeding electroplating drums.  ... mais informação

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic cylinder press brake-Manufacturer: HACO, 2 pieces of hydraulic cylinder from press brake type PPES 30135-Piston rod: Ø 160 mm-Stroke: 130mm-Price/tax: complete-Dimensions: 685/330/300 mm/piece-Weight: 168kg/piece ... mais informação

hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station,-Manufacturer: Bucher, hydraulic unit from press brake HACO type PPES 30135-Hydraulic pump: type QT43-020R-Engine: EMI 14.9 kW / 1460 rpm-Individual components: see photos-Dimensions: 970/420/H370 mm-Weight: 185 kg  ... mais informação

Side channel blower, ring blower, vacuum pump -Drive: 0.75 kW -Feed rate: 130 m3 / h -Max. Compression pressure: 195 mbar -Speed: 2800 rpm -Number: 2x pumps available -Price per piece -Dimensions: 320/280 / H420 mm -Weight: 16 kg / piece ... mais informação

AUTOMATIC BAGGING MACHINE, this vertical bagging station works with a max 1.000 mm plastic film reel, it can fill to pre-set weight, seal and cut the bag., different capacities, scale connected to filling unit, for plastic granulates and other granulated materials, good overall conditions,, the line is offered checked

For sale is an all-terrain, used land conveyor with covers. The fully hot-dip galvanized construction is from around 1995-2000 with an active service life of approx. 10 years. With a basic length of approx. 470 m, the belt can be extended in 6-meter increments after the discharge station. The construction offers a belt width of 500mm and a discharge and drive-through height of approx. 5.7m. Special features include an inclined design that follows the terrain with a roadway crossing and a discharge station with railing and walkway. Ideal for use in sand pits and similar operations without a conveyor belt. On-site inspection is possible.

TONGS:. - capacity:35000 kg - Gripping range:2000 mm - Tare weight:2665 kgELECTRICAL SPECIFICATIONS:. - total power consumption:1.1 kW - mains voltage:400 V - mains frequency:50 HzDIMENSIONS / WEIGHTS:. - space requirements length:2770 mm - space requirements width:1700 mm ... mais informação