- (18)
- Carrinhos de ferramentas (3)
- Centros de fresagem (3)
- Centros de fresagem CNC (51)
- Centros de fresagem e de perfuração (3)
- Centros de usinagem de alta velocidade (HSC) (4)
- Fesadora do tipo cama (39)
- Fesadoras do tipo cama horizontais (1)
- Fesadoras do tipo cama universais (10)
- Fresadoras de bancada por CNC (36)
- Fresadoras de consola horizontais (20)
- Fresadoras de consola universais (107)
- Fresadoras de consola verticais (9)
- Fresadoras de cópias (26)
- Fresadoras de mesa redonda (32)
- Fresadoras de portal (19)
- Fresadoras de portal CNC (35)
- Fresadoras de tabelas de indexação (2)
- Fresadoras e máquinas de perfuração de bancada transversais horizontais (2)
- Fresadoras e máquinas de perfuração de placas horizontais (1)
- Fresadoras e máquinas de perfuração horizontais (1)
- Fresadoras e máquinas de perfuração universales (27)
- Fresadoras e máquinas de perfuração verticais (1)
- Fresadoras Gantry (3)
- Fresadoras multifuncionais (5)
- Fresadoras pantógrafo (2)
- Fresadoras universais (105)
- Fresadoras verticais (21)
- Fresagem de pórtico e fresadoras gantry (2)
- Fresas CNC (135)
- Fresas de canto (4)
- Fresas de consola (10)
- Fresas de ferramentas (96)
- Fresas de ferramentas CNC (34)
- Fresas de ferramentas universais (35)
- Fresas de precisão (1)
- Fresas longas (1)
- Fresas longas de uma e dois suporte (1)
- Fresas para arredondar para arestas de dentes (1)
- Fresas para chanfrar (13)
- Mangas de pinça (1)
- Máquinas de corte de engrenagens cônicas espirais (2)
- Máquinas de fresa horizontal (11)
- Máquinas de fresa rolantes (7)
- Máquinas de fresagem de metal (4)
- Máquinas de fresagem de perfil (2)
- Máquinas de fresagem de roscas (1)
- Máquinas de fresar (146)
- Máquinas de fresar de mesa (1)
- Máquinas de fresar de ranhuras (6)
- Máquinas de fresar universais CNC (28)
- Máquinas de pantógrafo (2)
- Máquinas fresadora fixa (25)
- Máquinas para biselar dentes (1)
- Máquinas-ferramenta de fresa-mãe de roda esférica (2)
- Máquinas-ferramentas de fresa-mãe com eixo de peças verticais para dentes de engrenagens cilíndricas (3)
- Outras fresadoras (3)
- mais
- abb (10)
- Abene (4)
- Aciera (34)
- ACME (1)
- AFM (1)
- AGIE CHARMILES MIKRON (1)
- AgieCharmilles (2)
- AGMA (1)
- AKIRA SEIKI (1)
- ALCERA (1)
- ALCOR (2)
- ALESA MONTI (1)
- ALUGUSS (1)
- ALZMETALL (1)
- AMADA (1)
- AMCO-SACEM (1)
- AMF (9)
- ANAYAK (12)
- ANGER (1)
- ARBOGA (1)
- ARES - SEIKI (1)
- ARES-SEIKI (1)
- AROWA (1)
- ASSFAG (1)
- AUERBACH (6)
- AVEMAX INDUSTRIAL (1)
- Avia (8)
- AWEA (7)
- AWEA - CNC (1)
- AXA (12)
- AXILE (1)
- BARBER COLMAN (1)
- BAUBLYS (1)
- BAUER (1)
- BECKER DÜSSELDORF (2)
- BELKI (1)
- BEMATO (2)
- BERNARDO (5)
- BIMT (1)
- BJM (1)
- BOHLE (1)
- BOHNER + KÖHLE (2)
- BOKÖ (2)
- BOMAC (1)
- BORNEMANN (1)
- BRETON (1)
- BRIDGE MACHINERY (1)
- Bridgeport (4)
- Brother (7)
- BUSCH (3)
- BUSH OPTIBELT (1)
- Butler Elgamill (2)
- BUTLER NEWALL (2)
- BUTLER-ELGAMILL (1)
- BUTLER-NEWALL (2)
- Carver (2)
- CASTEL (1)
- CAZENEUVE (1)
- CB FERRARI (1)
- CEVISA (1)
- CHARLY ROBOT (1)
- CHEVALIER (1)
- Chiron (18)
- CIELLE (1)
- CINCINATTI (1)
- Cincinnati (2)
- CME (17)
- CMS (1)
- CNC (2)
- CNC-STEP (10)
- COLGAR (1)
- COMAGRAV (1)
- COMAU (1)
- COMU (1)
- COPYMAT (2)
- CORIMPEX (1)
- CORREA (30)
- CORREA ANAYAK (1)
- CORREA/ANAYAK (1)
- CSEPEL (2)
- CUGIR ROMANIA (1)
- Daewoo (2)
- DAH LIH (1)
- DAHLIH (1)
- DANDREA (4)
- DATRON (1)
- DATSUN (1)
- Deber (2)
- Deckel (146)
- DECKEL DMG (1)
- DECKEL ERSATMONITOR (1)
- Deckel Maho (51)
- DECKEL, STUDER, SAMECA (1)
- DECKEL-MAHO (8)
- DECKELMAHO (1)
- DEPO (1)
- DESCH (1)
- DIAG FRITZ WERNER (1)
- DIATEST (1)
- DIF (1)
- ... mais
subcategorias
(terceiro nível de categoria)
Fabricante:
(Categoria: 103)
usava
X-travel: 11,000mm, y-travel: 5000mm, connected load: 50kW, on-site inspection is possible, the drive motor of the spindle on one traveling column has been removed and is defective. ... mais informação
Ano de construção: 1987
usava
Center width: 400-800mm, rotational speed: 1000-2700/min, workpiece diameter: 10-300mm, grinding wheel diameter: 40-300mm, swivel angle: -45 to 45°, length: 3000mm, width: 2500mm, height: 2275mm, with oil mist separation system Hoffmann (new filter inserts), filter system gravity belt filter Faudi, hydraulic unit, additional grinding head for grinding worm gears, grinding mandrels diameter 50, 40, 27, 22, holder for SK40 and MK5, driver sets for different clamping diameters, operating instructions, circuit diagrams in paper form, an inspection is possible.
Ano de construção: 1967
usava
x-travel:1000 mmy-travel:320 mmz-travel:400 mmTable dimensions:1000 x 400 mm ... mais informação
Ano de construção: 1983
usava
Controls: Heidenhain TNC 150, length: 3600mm, width: 3000mm, height: 1900mm, with documentation, the machine is not functional, the control has fire damage, an on-site inspection is possible. ... mais informação
Ano de construção: 1977
usava
Including documentation, unused incremental length measuring scales for X, Y, Z-axis and display, on-site inspection is possible, has been regularly serviced. ... mais informação
Ano de construção: 1990
usava
adjustment drive of the grinding spind.slide:0,0025 - 0,05 mmtotal power requirement:100 kWadjustment of grinding head slide:150 mmweight of the machine ca.:17 tgrinding spindle drive:2 x 37 kWgrinding width:30-150 mmperipheral speed:34 m/secworkpiece speeds:60 - 300 mm/Sek.grinding height:70 mmgrinding wheel diameter:750 mmgrinding tools:750 x 75 x 350 mmgrinding wheel turning speeds:870 U/Min.max. workpiece diameter:250 mm
usava
Control system: Contour 2 lid, the machine has no operating hours counter, the control system parameters must be reloaded onto the machine, the buffer battery is empty, an on-site inspection is possible. ... mais informação
usava
Controls: Deckel Dialog 11, including documentation, on-site inspection is possible, has been regularly serviced. ... mais informação
novo
x-travel:1200 mmy-travel:800 mmz-travel:550 mmdistance spindle center to table:150-700 mmdistance between columns:920 mmtable-size:1320x800 mmtable load:2000 kgT-slot (width-distance-quantity):14x120x7 mmspindle taper:HSK-A 63/HSK-E 50 spindle speed:15000 (opt. 24000/36000) U/minspindle drive:7.5/11 (opt. 30/39; 20/26 kWSpindle motor torque:47.7/70 (opt. 29.1/37.8; 10.4/13.5) N.m.rapid traverse in x-y-z axis:30000 (opt. 40000) mm/minCutting feed rate X/Y/Z axis:1~10000 (opt.1~20000) mm/minTool changer:20 (opt. 24) max. tool diameter:100/130 (opt. 80/130) mmmax. tool length:300 (opt. 220) mmmax. tool weight:8 (opt. 4) kgtotal power requirement:30 (opt. 80) kvaWeight approx.:12 tMachine size (LxWxH):5026x4276x3210 mmpositioning accuracy:0,014 mmrepeating accuracy:0,008 mmCNC controller:Siemens/Fanuc/Mitsubishi/Heidenhain automatic tool changer:20/24 linear scales:Heidenhain/Fagor tool mea ...
Ano de construção: 2000
usava
X-travel: 2000mm, y-travel: 1000mm, z-travel: 1000mm, table dimensions: 2200x1000mm, number of T-slots/ width/ distance: 7/ 22/ 140mm, max. workpiece weight: 7.2t, connected load: 40kW, weight: 17t, operational hours counter machine on: 33,852h, with documentation and accessories, without operating hours counter, has been regularly serviced, on-site inspection is possible, available from May 2024.
novo
x-travel:1600 mmy-travel:1300 mmz-travel:700 mmdistance spindle center to table:200-900 (opt. 225-925/250-950) mmdistance between columns:1500 mmtable-size:1800 x 1300 mmtable load:4000 kgT-slot (width-distance-quantity):22x160x8 mmspindle taper:HSK-A 63/HSK-E 50 spindle speed:15000 (opt. 24000/36000) U/minspindle drive:15/18,5 (opt. 25/33 od. 20/26) kWSpindle motor torque:95/118 (opt. 72.6/95.8; 10,4/13,5 N.m.rapid traverse in x-y-z axis:30000 (opt. 40000) mm/minCutting feed rate X/Y/Z axis:1~20000 mm/minTool changer:20 (opt. 24) max. tool diameter:100/130 (opt. 80/130) mmmax. tool length:300 (opt. 220) mmmax. tool weight:8 (opt. 4) kgtotal power requirement:60 (opt. 80) kvaWeight approx.:22 tMachine size (LxWxH):5026x4276x3210 mmpositioning accuracy:0,014 mmrepeating accuracy:0,008 mmCNC controller:Siemens/Fanuc/Mitsubishi/Heidenhain automatic tool changer:20/24 chip conveyor with ch ...
Ano de construção: 1987
usava
Control: Heidenhain TNC 186, length: 2600mm, width: 3000mm, height: 1900mm, weight: 2.4t, with documentation, and SK40 mountings, the machine is electrically and control-technically not ready for use, mechanically the machine is in order, maintenance was carried out regularly, an inspection on site is possible.
Ano de construção: 2013
usava
Travel X/Y/Z: 1270mm/660mm/610mm, max. spindle speed: 15000rpm, feed X/Y/Z in mm/min: 15200/15200/15200. table load (uniform): 1360kg, dimensions X/Y/Z: approx. 4900mm/4600mm/3000mm, weight: approx. 10000kg. On-site inspection is possible. ... mais informação
Ano de construção: 2001
usava
X-travel: 1000mm, y-travel: 600mm, connected load: 32kVA, length: 3200mm, width: 2100mm, height: 2900mm, weight: 6.2t, with documentation and measuring probe, the tool changer is defective, otherwise the machine is functional, an on-site inspection is possible. ... mais informação
usava
500 €
Ano de construção: 1990
usava
Travel X/Y/Z: 400mm/400mm/400mm, spindle speed: 40-4000rpm, quill stroke: 80mm. Table size: 710mm x 460mm. Dimensions X/Y/Z: 4100mm/4200mm/2000mm, weight: 1900kg. Documentation available. On-site inspection is possible. ... mais informação
Ano de construção: 2012
usava
X-travel: 1000mm, y-travel: 1800mm, z-travel: 700mm, max. load: 8t, rotational speed: 1-12,000/min, weight: 18t, operational hours counter controls/ machine/ spindle: 71,517/ 70,339/ 37,470h. ... mais informação
usava
Travel X/Y/Z: 630mm/500mm/500mm, max. spindle feed X/Y/Z: 24m/min, max. cutting feed rate: 12m/min. Max. Spindle speed: 8000rpm, table dimensions X/Y: 800mm/500mm. Tool holder: ISO40, tool capacity: 24, max. tool weight: 6kg, max. tool diameter/length: 100mm/300mm, tool change time: 3.6s. Control: Heidenhain TNC 426M, operating hours: 12100h, dimensions X/Y/Z: approx. 2600mm/2400mm/2600mm, weight: approx. 4500kg. Documentation available.
usava
Travel X/Y: 500 mm/200mm, max. speed: 4000 rpm. Max. Workpiece weight: 60kg, max. workpiece diameter/length: 225mm/20mm, table dimensions X/Y: 600mm/200mm. Dimensions X/Y/Z: 2800mm/2850mm/1650mm, weight: 1800kg. Loose contact on the magnet, machine is used with a sine table. ... mais informação
Ano de construção: 1991
usava
Travel X/Y/Z: 850mm/500mm/450mm, speed range: 35-18000rpm with 18 steps, table dimensions X/Y: 1250mm/400mm. Control: Heidenhain TNC355, tool holder: SK40, weight: approx. 5500kg. Including an assortment of tools. Documentation available. ... mais informação