subcategorias
(terceiro nível de categoria)
Fabricante:
(Categoria: 406)
Automatic Foamfoil - Packing machine EASY 250 Special The Easy 250 Special is wrapping your precious workpiece with a foamfoil. So the surface is protected in a perfect way, also in a hardpaper box. The wrapping is in throughfeed and independed of any different width. Made for Batch1. Different length and width in the mix ! The line is mainly existing of: -infeed transport belt with Servodrive for precise positioning, length 2800 mm -First welding station with fast positioning in the width -Center transport belt with Servodrive, length 2800 mm -Second welding station with fast positioning in the width Foil width top and bottom: 260 - 600 mm Foil roll diameter: top and bottom: 800 mm Foam foil thickness appr. 1,0 mm Workpiece length appr. 1500 - 2600 mm Workpiece width appr. 300 - 1400 mm Workpiece thickness appr. 35 - 90 mm
new foil wrapping machine brand: ERREGI type: Compact 250 line consisting of 2 parts: wrapping machine and shrinking tunnel, with infeed and outfeed elements With automatic selection of 3 or more foil widths. wrapping machine: length of welding bar: 2.500 mm number of reel pairs top: 3 max. width of top reels: 2.450 mm number of reel pairs bottom: 3 max. with of bottom reels: 1.450 mm width of conveyor belts: 1.300 mm length of exit belt: 2.400 mm length of infeed belt: 3.500 to 2.200 mm (telescopic) working height (conveyor): 800 mm opening height (max. workpiece height): 700 mm min. workpiece weight: 5 kg shrinking tunnel: installed power: 54 kW average hourly consumption: 35 kWh length of shrinking area: 2.700 mm total length of tunnel: 3.700 mm width of conveyor: 1.500 mm working height (conveyor): 800 mm opening height (max. ...
Throughfeed case clamp Make: ERREGI Type: Tecnopress VR2/2 New machine Fast - Silent - Clean - Lean - Universal - Service by Wehrmann Technical data: Self-positioning thru-feed carcase press The load bearing structure of the machine consists of a double portal in welded tubular steel, inside of which the two mobile heads and the presser table run. -The presser table and the mobile head are driven by motors. - Each of the mobile head and fixed is fitted with three horizontal pressure beams with programmable positioning moved vertically by an electro mechanical system. - The belt system is positioned on either side of the machine to allow the carcase to be clamped equally well, whether is his depth. -The carcase transfer system is located at the bottom of the bed and consists of an electro-welded steel structure on which a closed loo ...
High precision protective film laminating machine Brand: Omma Type: PRO-J14_TF New machine Single machine (not integrated in a line) Workpiece dimensions: min. width 130 mm max. width 560 mm min. length 300 mm max. length 2.250 mm min. thickness 19 mm max. thickness 25 mm For application of self-adhesive film on the top of painted surfaces. Laminating rollers Ø 150 mm Working width 1.300 mm Max. workpiece thickness 80 mm Speed adjustable 5/25 m/min Working height (adjustable +/- 20mm) 905 mm Connected load kW 0.75 Integrated insertion/exit rollers Length (approx.) 300 mm Color RAL 7021 + RAL 2004 Operator side (in front of the machine, towards the entrance) right side Standard voltage v 400/50/3+N+T Max. Outer diameter of roller Ø 300 mm Inner diameter of roller Ø 76 mm Technical equipment: - High precision automatic cross cutting foil cutting ...
New shrink foil packaging machine Brand: Erregi Type: EASY 250 This plant consists of the wrapping machine and the shrink tunnel. The wrapping machine is formed of a suitably reinforced steel chassis, an infeed and an outfeed conveyor belt. In machine chassis there are the following components: - The driven upper roller - The system for unrolling the lower roller, consisting of a driven roller and a pneumatic assisted idle roller. - The system for welding and cutting the upper and lower PE sheets consisting of a special alu profile, with temperature controll and changable steel blade for carry out the cold cut. - The infeed and outfeed transport belt is likewise made up of reinforced steel chassis on which a closed link belt is mounted. The shrink tunnel consists of two chassises. - One holding the heated part and one supporting the former. - This system wi ...
Operational hours: ca. 2200h, including gripper feeder and Shrinking Tunnel PACKTECH Minipack. ... mais informação
Welding bar dimensions: 500x380mm, max. film roll dimensions: 300x600mm, max. pachaging dimensions: 500x380x200mm, length: 1275mm, width: 700mm, height: 1095mm. ... mais informação
Operational hours counter: ca. 200h, with spare parts, documentation shrinking tunnel, inspection is possible, but not under power. ... mais informação
Welding frame format: 550x410mm, packing dimensions welding/ shrinking: 530x390x200/ 500x360x200mm, film width: 200-500mm, roll diameter: 260mm, connected load: 2.6kW. ... mais informação
Output: 30-50/min, connected load: 20kW, length: 9500mm, width: 3500mm, height: 2200mm, including documentation. ... mais informação
Sealing length: 600mm, speed: 1-4/min, max. connected load: 4kW. ... mais informação
Max. welding width: 600mm, opening height: 280mm, packing length/ height: 450/ 170mm, output: 20 packages/min, max. film roll diameter: 250mm, compressed air supply: 6bar, length: 2830mm, width: 1344mm, height: 2014mm, with documentation. ... mais informação
Opening dimensions: 550x300mm, tunnel length: 1150mm, connected load: 7kW, weight: 215kg, with conveyor belt and documentation. ... mais informação
Welding frame dimensions: 650x550mm, product dimensions: 130-550x30-450x20-240mm, connected load: 13.5kW, length: 3515mm, width: 1416mm, weight: 880kg, with documentation. ... mais informação