trituradores usadas para venda

Granulator with rotor width 1000 mm, motor 37 kW, with hopper attachment and hydraulic feed slide. Knives resharpened and whole machine repainted. Very good condition. Optionally with total separator and fan for the regrind.  ... mais informação

Granulator with rotor width 500 mm, feed chute, 6 replacement screens with square holes. The upper part can be opened by means of a rack and pinion winch for easy knife change and cleaning. Machine is in very good condition and has been little used. Optionally, a fan and a total separator for the regrind are available.

Pre-shredder for garbage, waste wood, green waste, roots, commercial waste etc., five travel drives, auxiliary hydraulics, SPECIAL FEATURE: Engine, hydraulic system and electrics new after fire damage, service and tools new or as good as new.  ... mais informação

Shredder for green waste, roots, waste wood, reed wood, organic waste, biomass, bark, etc. Equipment: Radio, hydraulic travel drive, overbelt magnet, SPECIAL FEATURE: Both shredding shafts, basket carrier with bio-cutting unit, baskets, tools, large service renewed before 100 hours of operation original Komptech.

Granulator granulator with 600 mm rotor width, 3 cutting blades, 37 kW motor power, very little used, like new.  ... mais informação

Single shaft shredder with 1350 mm shaft, hopper 1350 x 1100 mm, motor 37 kW, all bearings new. Extremely robust construction. Slow runners.  ... mais informação

Recycling machine trade AGICOM- Pedergnana OG: The mulcher is used to recover iron and aluminum from high-voltage lines. Cable cross-sections: Ø 10 - 50 mm Power consumption: approx. 31 kW / 380 V Dimensions: approx. (L x W x H) 1,300 x 1,300 x 1,740 mm Weight: approx. 3,500 kg  ... mais informação

AGICOM recycling machines: Very good, almost as good as new single-shaft shredder for old cables, wood The cutting width or rotor length is 400 mm, 30 mm indexable cutting plates are installed. The machine has a hydraulically driven gate valve equipped with pressure monitoring. The machine has only 35 hours of operation and is still coated with the original paint in the cutting room. • Year of construction 2007 • Propulsion: 9.2 kW • Hydraulic pusher: 1.5 kW • Weight of single-shaft shredder Bano MAC400: approx. 850 kg

agicom recycling machines: Powerful, very powerful pre-shredder for old cables, scrap, paper/cardboard or plastic. Robust design, hydraulic pusher, easy replacement of the perforated screen, reversible blades Year of construction: 2021 Power: 30 kW; 400 volts Cutting blade: 43x43 mm Rotor length: 600 mm Rotor diameter: 250 mm Dimensions: 1550x1500x2100 mm Weight: approx. 1600 kg

Forrec AE-600R single-shaft shredder: Used and very powerful single-shaft shredder for a wide range of applications. Easy replacement of perforated screen, hydraulic pusher Technical data shredder Forrec AE-600R: 30 kW; 400 volts Cutting blade: 43x43 mm Rotor length: 600 mm Rotor diameter: 250 mm Dimensions: 1550x1500x2100 mm Weight shredder Forrec AE-600R: approx. 1600 kg

AGICOM recycling machines: Cable shredder/granulator IRS PM1840 used. Technical Data Cable Shredder: 5.5 kW, 32 A Perforated screen 10 mm; LxWxH: 135x120x212 cm approx. 550 kg  ... mais informação

Permanent Overbelt Magnetic Separator TYPE DMPM1400 1.600 x 900 x 220mm = Solid steel construction, welded Welded & painted construction RAL 7016 (anthracite grey) Magnet dimensions: 1.000x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm spherical overtightened, shaft fixed with tension bearings. Drive: Slip-on geared motor GEMOTEG 1.1KW, speed 0.4-0.6m/sec Connection 400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5,4mm thick Conveyor belt width: 700mm 7 pcs. TG-40 cleats high-frequency welded Belt material: 3-ply particularly transversely stable Equipped with stainless alligator connectors RS125 Magnet Features: Built-in magnetic core: Strontium Ferrite Y30 Bonded SfRe strontium hard ferrite  ...

Permanent Overbelt Magnetic Separator TYPE PEM1200 1200 x 550 x 200mm = 4x eyebolt for suspension Drive roller + deflection roller S235 steel welded and machined Ø150x300mm convex overtightened, shaft fixed with tension bearings. Two-hole flange bearing UCFL with grease nipple, sealed bearing cage Propulsion: Slip-on geared motor GEMOTEG 0.18KW, speed 0.4m/sec Connection 400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt endless GB30 black matt 7 x T20 cleats high-frequency welded High-quality 3-fold aluminum construction 2 side mudguards V4A Magnet dimensions: 700x230x120mm magnetic core encased in soft iron, so that a very high permeability can be guaranteed. Underbody tightly closed and sealed with stainless steel plate and pole shoes.

Engine power 4.0 (5.45) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 880 mm width 735 mm Height 1540 mm Weight 70 kg material Steel painted Hoehe ejection in 450 mm ; New machine - best condition  ... mais informação

- 1 outletnominal power kg/h 800 kg/h engine power 5.5 (7.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 72 5 mm width 690 mm Height 1520 mm Weight 75 kg material 1.4301 / AISI 304 Height ejection in 475 mm Supplied incl. sieve 5mm ; New machine - best condition  ... mais informação

Rated power kg/h 1500 kg/h Engine power 11 (15) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 32 A Laenge 810 mm width 725 mm He he 1570 mm weight 133 kg Material 1.4301 / AISI 304 Sieve 5mm ; New machine - best condition  ... mais informação

Complete solution for the transport of bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium angled conveyor belt incl. substructure horizontal area 2,500mm Ziruu8vxy Rising area 2,400mm Angle in bend 45° Feed height: 300mm Discharge height 2,000mm Total conveyor belt length measured on the floor: 4,200mm Conveyor belt width 500mm PVC conveyor belt incl. cleats and corrugated edge Propulsion: Motor 0.55KW Speed approx. 0.3-0.5m/sec Connection 400/240V, 50Hz IP54 protection Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 50x35mm 25 pcs T-40 cleats - 396mm pitch 2-ply particularly transversely stable Usable width: 290mm, results as follows: Transverse arrangement 70+35+290+35+70mm ONLY AS LONG AS STOCKS LAST All our prices are net prices plus VAT. - can a ...

Aluminium angled conveyor belt with substructure incl. adjustable feet as well as machine feet for levelling unevenness horizontal area: 1,500mm Rising Area: 4,000mm Angle of inclination in bend 45° Discharge height: 3,000mm Height of horizontal: 200mm Execution: Aluminum construction - 2-fold profile reinforced 90x45mm Drive roller + deflection roller S235 steel welded and machined Ø100x420mm convex overtightened, shaft fixed with tension bearings. Propulsion: Slip-on geared motor 0.55KW, speed 0.3m/sec Connection 230/400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU incl. corrugated edge PU petrol matt Conveyor belt width: 400mm 2 pcs. corrugated edges 50 high, 35mm wide, high-frequency welded 28 T-40 cleats, approx. 400mm pitch Belt mate ...

Impact Mill LUT Brand: LUT/Hazemag Type: LTP/1600/1800 SK Inlet opening: 1850 x 1300 mm. Propulsion: 400 kW electric motor Incl.: entrance cabinet, electric motor and hydraulic unit. Weight: about 52 tons.  ... mais informação

Impact mill SBM Austria Brand: SBM Austria Type: HSB 125/112 4F for hard rock Inlet opening : 1150 x 450 mm Incl.: E-Motor & Hydroliek-unit  ... mais informação