mandriladoras, centros de usinagem usadas para venda

Mechanical compression Tidy You can call or write to us. We can speak and write German and Russian. You can also send messages in English. 5.2.5.  ... mais informação

You can call or write to us. We can speak and write German and Russian. You can also send messages in English 5.1.1.  ... mais informação

Description: Complete REM OVER RS 20.13 CNC machining center for drilling, milling and grooving. Incl. MAHROS Runner 12-32/D loading and unloading bridge and OMAL INSERT LINEA 2000 CNC machining center for drilling and dowel insertion station. The pictures are from 2011 after commissioning. Original pictures of the current dismantled state (warehouse service provider) will be submitted later. Pos. 1 MAHROS Runner 12-32/D loading and unloading bridge in portal design - Suction frame with automatic suction cups - Motorized roller conveyor - Dimensions approx. 1000 x 3500 mm - Load capacity approx. 1000 kg/m - Unloading conveyor LS-90° (LxW approx. 3200 x 1600 mm) - Unloading conveyor LS (LxW approx. 5120 x 1600 mm) - Plate dimensions  ,  ,- Length approx. 230 - 3200 mm  ,  ,- Width of the single plate approx. 220 - 1220 mm  ,  ,- Width of the plates in double row ...

Description: measuring range: X = 2,700 mm / Y = 1,250 mm / Z = 85 mm (other dimensions on request) resolution: 0.01 mm accuracy (tolerance): <, +/- 0.1 mm connected load: min. 2 sockets 230 Volt AC field of application incoming goods: quality inspection of delivered parts quality assurance: sample measurement directly on the production line production: for regular checking of machine settings before the start of production of a series process control (safety in production) reduction in set-up time through automatic feedback to the operator of the drilling spindles to be adjusted in the X, Y and Z directions. quality check before delivery - assembly & training by HECHT AG, possible by exclusive arrangement. - factory overhaul 2023 - 12 months warranty with max. 2-shift operation (not valid for spare and wear parts)Approx. Onsite Dimension. (l x w x h): 3,364 x 2,600 x 1,300 mm ...

Description: ATTENTION: Location 35614 Aßlar, Germany Well-maintained HOMAG Optimat BAZ 311/52/K CNC machining center with HOMAG Optimat TBA 330/20/16 vacuum feeder, main spindle with Flex5 interface and web edge press unit. ,The main spindle was replaced at the beginning of March 2024 and the costs were EUR 19,000! HOMAG Optimat BAZ 311/52/K, machine no. 0-201-21-4391 HOMAG Optimat TBA 330/20/16, machine no. 0-205-21-4383 Workpiece length: - Single occupancy with tool diameter. 25mm max. 5200mm - Pendulum assignment with tool diameter. 25 mm max. 2150 mm with pendulum occupancy Workpiece width front stop: - max. 1525 mm with tool diameter 25mm - max. 1525 mm with web edge pressing unit - max. 1450 mm for all units Workpiece width stop at the back: - max. 1730 mm with tool diameter 25mm - max. 1650 mm with web edge press unit - max. 1600 mm for all units Main spindle: - Motor  ...

Description: The system was overhauled for every single component before it was originally installed. Disassembled sawmill plant. , Below is a description of the parts making up the plant (excluding parts not included in the sale, which are absent from the original plant). In order from the first photo (after photo 'disassembled components'):  , Band saw control panel. Saw carriage with 2 vices and variable distance. Saw carriage rope drum. BONGIOANNI saw body Diameter: 1300 mm No. 2 motors of 55 kW power for STORTI multi-blades, No. 1 motor for BONGIOANNI band saw, No. 1 variator for saw carriage. STORTI multi-blade saw Switchboard for BONGIOANNI saw and for automation. Exhausts. Rear roller conveyor of mitre saw with No. 2 stops. Roller conveyor for introduction to STORTI multi-blade saw. Band saw unloading roller conveyor. Three-way conveyor. Lower flywheel of the BONGIOAN ...

Description: Manual available at this LINK Minimum working size 40 x 25 mm Maximum working size 200 x 105 mm Working length 200 - 3500 mm X1 Axis Stroke: 6120 mm X2 Axis Stroke: 6120 mm X3 Axis Stroke: 6200 mm X4 Axis Stroke: 6200 mm CU Axis Stroke: 1620 mm Y1 Axis Stroke: 4000 mm Y2 Axis Stroke: 4000 mm Y3 Axis Stroke: 4000 mm Z1 Axis Stroke: 440 mm Z2 Axis Stroke: 440 mm Z3 Axis Stroke: 620 mm V1 Axis Stroke: 1100 mm V2 Axis Stroke: 1100 mm1 W Axis Stroke: 230 mm A Axis Stroke: 180° C Axis Stroke: 360° SP1 Spindle Power: 14 kW SP2 Spindle Power: 14 kW SP3 Spindle Power: 12 kW Tool changer magazine with 62 positions Max tool diameter 200 mm Tool attachment HSK 63 Blade group power 2.2 kW Blade diameter 200 mm Total power 55 kilowatts SINUMERIK HMI control WARNING! Belts, elastic bands, and photocells of loading and transfer systems require maintenance.serial number: 152/06, Approx.  ...

Description: WOOD ROUTER CNC SPEED 2010 Very few operating hours, neat and tidy condition of the machine. Space-saving Speed 2010 model for series production of various materials. Solid wood, chipboard, fiber, composite & abrasive materials Thermoplastics & thermosets , Elastomers Specially developed for nesting applications Including the following special equipment Vacuum table - new price: 7.420, - € net Reinforced calculator - new price: 625,- € net Technical specifications Rated voltage 400 V Repeat accuracy +/- 0.1 mm Backlash +/- 0.05 mm Working speed 50-5000 mm / min Tool length sensor HF spindle HSD 2.2 kW, air-cooled incl. holder and collet set ER25 PC, mouse, keyboard, monitor in the ergonomic computer desk on the machine CAD Rhino 7.0 software package, Beamicon2 control system, CAM Estlcam V11 Gear racks, planetary gears and profile guides on the X and Y axes Ba ...

Description: - Workpiece length  , All units max. approx. 5200 mm  , Milling cutter 25 mm max. approx. 5375 mm - Workpiece width  , Rear stop for all units max. approx. 1400 mm  , Rear stop cutter 25 mm max. approx. 1550 mm  , Front stop for all units max. approx. 1150 mm  , Front stop milling cutter 25 mm max. approx. 1220 mm - Main spindle 18.5 KW with C-axis  , Speed 0 - 24000 rpm - 72-speed chain changer - Milling spindle 6 KW - LED console position indicator - Chip conveyor belt and articulated belt conveyor (Further tools and units for the tool changer are not included within delivery. Availability depends on the delivery of the new machine. A transport rack from HOMAG is required for transportation of the dismantled machine. This results in costs of EUR 6,500,-- (plus tax). After the transport rack has been returned to Helmut Meier (Germany Burgthann), ...

Description: Table: Length: 3250 mm Width: 1300 mm Pneumatics: Connection: R ½' Minimum pressure in feed: 7 Bar Air consumption: approx. 300-500 L/min Extraction: Extraction connection: O 250 mm, Height: approx. 2370 mm Total extraction capacity: min 4950 m3/H Air velocity: min 25 m/sec Pressure drop: min 2200 PA Electricity: Protection: IP53 Operating voltage: 3 400 Volt Frequency: 50/60 Hz Rated current: 31A Total connected load: 17.5 kW x-motion: 4,000 mm, y-motion: 1,670 mm, z-motion: 370 mm, path-feed rate max. X-axis: 80 m/min, path-feed rate max. Y-axis: 60 m/min, path-feed rate max. Z-axis: 20 m/min, software: Woodwop 4.5, Approx. Onsite Dimension. (l x w x h): 6450mm x2500mm x2800mm mm, weight approx.: 4,500 kg

Description: X-axis working surface: 4400 mm Y-axis working surface: 2100 mm vacuum pump automatic tool change motor power: 12 kW , control system: POWER PC CONTROL PC 85 x-motion: 4,400 mm, y-motion: 2,100 mm, control: POWER PC CONTROL PC 85, Approx. Onsite Dimension. (l x w x h): 6,200 x 2,400 x 1,000 mm, weight approx.: 4,300 kg

Description: main engine power: 3 HP serial number: 6S25 consisting of 5 lower drilling units with 11 + 11 spindles each. Wheelbase 32 mm drilling blocks swivelling from 0 to 90 degrees motor power 3 HP at 2800 rpm each maximum width horizontal drilling 3200 mm minimum width 260 mm 6 vertical pneumatic clamps automatic conveyor group with stop and pneumatic reference squaring device maximum speed 43 m + / min installed power 16,5 kW, 400 V, 50 Hz, 35 amp, 3 phases serial no. 6S25 dimensions in mm: approx. 5000 x 4400 x 2000 , weight in kg: approx. 5000 serial number: 6S25, working width min.: 260 mm, working width max.: 3,200 mm, total power approx: 16.5 kW, Approx. Onsite Dimension. (l x w x h): 5,000 x 4,400 x 2,000 mm, weight approx.: 5,000 kg

Technical details on demand. ... mais informação

Working width: 630mm, max. portal passage: 690mm, clamping height: 100mm, drilling stroke: 120mm, weight: 300kg, on-site inspection is possible. ... mais informação

New CNC drilling- and dowel inserting machine Brand: VITAP Type BLITZ 3.0 Blitz CNC drilling glueing and dowel inserting machine (axis X) 1300mm. Highly efficient and reliable thanks to a easy software. Ideal for JUST IN TIME production or mass production. Machine standard equipment: - Drilling head 3500 rpm - N °3 horizontal indipendent spindles - N° 3 vertical indipendent spindles - N °1 glue and dowels inserting unit - N °1 high capacity vibrator to feed the dowels - N° 1 low pressure pump for the glue Working area horizontal head: - X= 1300 mm - Y= 50 mm - Z= 50mm (vertical) - Z=25mm (horizontal) Combined drilling and driving unit for dowels: - Configurations of min. 6 x 25 mm and max. 10 x 40 mm are possible. - The desired dowel configuration must be specified when ordering. Sets for further dowel configurations are optionally availab ...

Mobile extraction Make: Riedex Type: DM 350 New machine Technical data: - Motor power 11 kW - Nominal volume flow 6297 m³/h - max. volume flow 8000 m³/h - 49,6 m² filter surface - motorised cleaning - Residual dust content  ... mais informação

Dowel hole drilling machine Brand: VITAP Type: ALFA 21 CLASSIC New machine - One boring unit 21 spindles - QUICK CHANGE SPINDLES - Pneumatic cylinder for horizontal/vertical positioning of the boring group (45 degreed and any intermediate angles) - Front/top caliper to obtain the same boring measure between horizontal and vertical position - Tilting side stops adjustable by metric scale and nonius and magnifying lens on each stop - 2 safety clamps inclined 4 degrees - Height regulation of the boring group by mechanical digital position indicator; - 6 positions turret to adjust the drilling depth (0-80 mm) - Automatic vertical-horizontal depth difference device (10 mms) - Drilling speed adjustment from the panel control - Strengthened steel structures for tilting of the boring group - 1 motor HP. 2 (Kw 1,50) - Start/stop electropneumatic circuit by mean ...

Mobile extraction Brand: Riedex Type: DM 160 New machine Technical data: - Motor power 3 kW - Nominal volume flow 1448 m³/h - Associated negative pressure 3000 Pa - Max. volume flow 2000 m³/h - 10.6 m² filter surface - motorised cleaning - Residual dust content  ... mais informação

Mobile dust extraction Brand: Riedex Type: DM 200 New machine Technical data: - Engine power 4 kW - Nominal volume flow 2262 m³/h - max. volume flow 3200 m³/h - 14,1 m² filter surface - motor cleaning - Residual dust content  ... mais informação

Mobile extraction Brand: Riedex Type: DM 300 New machine Technical data: - Motor power 7,5 kW - Nominal volume flow 5089 m³/h - max. volume flow 6000 m³/h - 31,8 m² filter surface - motorised cleaning - Residual dust content  ... mais informação