- (12)
- Carrinhos de ferramentas (3)
- Centros de fresagem (3)
- Centros de fresagem CNC (51)
- Centros de fresagem e de perfuração (3)
- Centros de usinagem de alta velocidade (HSC) (4)
- Fesadora do tipo cama (40)
- Fesadoras do tipo cama horizontais (1)
- Fesadoras do tipo cama universais (10)
- Fresadoras de bancada por CNC (36)
- Fresadoras de consola horizontais (20)
- Fresadoras de consola universais (107)
- Fresadoras de consola verticais (9)
- Fresadoras de cópias (26)
- Fresadoras de mesa redonda (32)
- Fresadoras de portal (20)
- Fresadoras de portal CNC (35)
- Fresadoras de tabelas de indexação (2)
- Fresadoras e máquinas de perfuração de bancada transversais horizontais (2)
- Fresadoras e máquinas de perfuração de placas horizontais (1)
- Fresadoras e máquinas de perfuração horizontais (1)
- Fresadoras e máquinas de perfuração universales (27)
- Fresadoras e máquinas de perfuração verticais (1)
- Fresadoras Gantry (3)
- Fresadoras multifuncionais (5)
- Fresadoras pantógrafo (2)
- Fresadoras universais (108)
- Fresadoras verticais (21)
- Fresagem de pórtico e fresadoras gantry (2)
- Fresas CNC (137)
- Fresas de canto (4)
- Fresas de consola (9)
- Fresas de ferramentas (98)
- Fresas de ferramentas CNC (34)
- Fresas de ferramentas universais (35)
- Fresas de precisão (1)
- Fresas longas (1)
- Fresas longas de uma e dois suporte (1)
- Fresas para arredondar para arestas de dentes (1)
- Fresas para chanfrar (13)
- Mangas de pinça (1)
- Máquinas de corte de engrenagens cônicas espirais (2)
- Máquinas de fresa horizontal (11)
- Máquinas de fresa rolantes (7)
- Máquinas de fresagem de metal (4)
- Máquinas de fresagem de perfil (2)
- Máquinas de fresagem de roscas (1)
- Máquinas de fresar (148)
- Máquinas de fresar de mesa (1)
- Máquinas de fresar de ranhuras (6)
- Máquinas de fresar universais CNC (28)
- Máquinas de pantógrafo (2)
- Máquinas fresadora fixa (25)
- Máquinas para biselar dentes (1)
- Máquinas-ferramenta de fresa-mãe de roda esférica (2)
- Máquinas-ferramentas de fresa-mãe com eixo de peças verticais para dentes de engrenagens cilíndricas (3)
- Outras fresadoras (3)
- mais
- abb (10)
- Abene (4)
- Aciera (34)
- ACME (1)
- AFM (1)
- AGIE CHARMILES MIKRON (1)
- AgieCharmilles (2)
- AGMA (1)
- AKIRA SEIKI (1)
- ALCERA (1)
- ALCOR (2)
- ALESA MONTI (1)
- ALUGUSS (1)
- ALZMETALL (1)
- AMADA (1)
- AMCO-SACEM (1)
- AMF (9)
- ANAYAK (12)
- ANGER (1)
- ARBOGA (1)
- ARES - SEIKI (1)
- ARES-SEIKI (1)
- AROWA (1)
- ASSFAG (1)
- AUERBACH (6)
- AVEMAX INDUSTRIAL (1)
- Avia (8)
- AWEA (7)
- AWEA - CNC (1)
- AXA (12)
- AXILE (1)
- BARBER COLMAN (1)
- BAUBLYS (1)
- BAUER (1)
- BECKER DÜSSELDORF (2)
- BELKI (1)
- BEMATO (2)
- BERNARDO (5)
- BIMT (1)
- BJM (1)
- BOHLE (1)
- BOHNER + KÖHLE (3)
- BOKÖ (2)
- BOMAC (1)
- BORNEMANN (1)
- BRETON (1)
- BRIDGE MACHINERY (1)
- Bridgeport (4)
- Brother (8)
- BUSCH (3)
- BUSH OPTIBELT (1)
- Butler Elgamill (2)
- BUTLER NEWALL (2)
- BUTLER-ELGAMILL (1)
- BUTLER-NEWALL (2)
- Carver (2)
- CASTEL (1)
- CAZENEUVE (1)
- CB FERRARI (1)
- CEVISA (1)
- CHARLY ROBOT (1)
- CHEVALIER (1)
- Chiron (18)
- CIELLE (1)
- CINCINATTI (1)
- Cincinnati (2)
- CME (17)
- CMS (1)
- CNC (2)
- CNC-STEP (10)
- COMAGRAV (1)
- COMAU (1)
- COMU (1)
- COPYMAT (2)
- CORIMPEX (1)
- CORREA (30)
- CORREA ANAYAK (1)
- CORREA/ANAYAK (1)
- CSEPEL (2)
- CUGIR ROMANIA (1)
- Daewoo (2)
- DAH LIH (1)
- DAHLIH (1)
- DANDREA (4)
- DATRON (1)
- DATSUN (1)
- Deber (2)
- Deckel (147)
- DECKEL DMG (1)
- DECKEL ERSATMONITOR (1)
- Deckel Maho (51)
- DECKEL, STUDER, SAMECA (1)
- DECKEL-MAHO (8)
- DECKELMAHO (1)
- DEPO (1)
- DESCH (1)
- DIAG FRITZ WERNER (1)
- DIATEST (1)
- DIF (1)
- DIXI (1)
- ... mais
subcategorias
(terceiro nível de categoria)
Fabricante:
(Categoria: 103)
novo
Edge chamfering machine KF 6000 OPTIEDGE is a powerful portable edge cutter that has proven itself in harsh operating conditions. The device is the optimal choice for chamfering large metal sheets or heavy, bulky workpieces without having to move them. - Length of guide rails 230 mm - Width of the bevel max. 10 mm - Angle adjustment 15 - 45° - Motor power main drive 0.75 kW - Powerful servo motor - Infinitely variable speed If you are interested, we will be happy to send you our complete data sheet.
usava
Vertical CNC Machining Center The Vector series is the compact, all-in-one machining solution, designed and pre-configured for complex manufacturing challenges. The machines are designed using state-of-the-art FEM analysis software. The production is carried out under strict quality control to guarantee flawless execution. Additional stability in the machine frame is provided by both the tried-and-tested Meehanite cast iron and the delta construction of the column. The consistently high-quality components guarantee smooth operation in multi-shift operation. - Condition: like new (exhibition machine) - Machine frame optimized by means of FEM analysis - Extra-wide Y-shaped column construction for high stability - Coolant through spindle (30 bar) for optimum machining quality - Designed for multi-shift operation - Variety of customization and automation options - 2 year warranty ...
Ano de construção: 2014
usava
HAAS TM-1P CNC vertical machining center was manufactured in 2014 in the United States. This extremely easy-to-use machine with extensive machining capabilities ensures efficient and precise machining of workpieces over its entire lifetime. The machining process is performed on a stable work table using reliable components in the form of cutting tools and a high-speed spindle. In addition, each tool is continuously measured by an extremely accurate RENISHAW measuring probe to ensure that the process runs continuously and without any interruptions. All machining parameters are programmed in the intuitive HAAS CNC control. The perfectly optimised controller allows for the creation of advanced machining programmes in just a few steps, without knowledge of G-codes. The HAAS TM1P CNC machining center is also offered with optional equipment which includes, among others, milling heads, colle ...
Ano de construção: 1999
usava
CONTROLS CNC controls SIEMENS SINUMERIK 840 C TABLE table surface (left-right): 4000 mm table surface (front-back): 1250 mmTOOL MAGAZINE magazin type: cartridge magazine number of positions: 300 ELECTRICAL SPECIFICATIONS mains power supply: 80 kVA mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS total weight approx.: 50000 kg
Ano de construção: 1984
usava
CONTROLS CNC controls DECKEL DIALOG 4 WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 3 X-axis travel: 400 mm Y-axis travel: 320 mm Z-axis travel: 400 mmTABLE table surface (left-right): 700 mm table surface (front-back): 460 mm workpiece load (max): 350 kgSPINDLE / HEAD spindle revolutions (min): 63 /min spindle revolutions (max): 6300 /minAXIS DRIVES feed velocity (min): 2 mm/min feed velocity (max): 3600 mm/min rapid traverse: 4000 mm/minELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 HzDIMENSIONS / WEIGHTS space requirements -left/right-: 3200 mm space requirements -front/back-: 3200 mm total weight approx.: 2000 kg
usava
Traversal X/Y/Z: 365mm/185mm/360mm, Speed range: Various speeds depending on the gear stage: BC - 115/230 rpm, AC - 290/580 rpm, BD - 360/720 rpm, AD - 875/1750 rpm, measuring system: SINO SDS2MS, spindle orientation: horizontal/vertical. Control panel: Features stop, emergency stop and direction control. On-site inspection is possible.
usava
X-travel: 485mm, y-travel: 385mm, z-travel: 380mm, max. rotational speed: 3150/min, controls: DECKEL CONTOUR 2, with documentation, the machine has already been in storage for 18 months. ... mais informação
Ano de construção: 1985
usava
usava
Ano de construção: 1986
usava
Anzahl Achsen: 3, rotational speed: 450-2800/min, connected load: 6kW, weight: 2t, including accessories and documentation. ... mais informação
usava
9.000 €
Ano de construção: 2008
usava
Pneumatic pressure: 6bar, connected load: 26.92kW, weight: 400kg, with documentation. ... mais informação
usava
Ano de construção: 1990
usava
X-travel: 560mm, y-travel: 500mm, z-travel: 390mm, table dimensions: 900x530mm, rotational speed: 4000/min, tool changer: SK 40, controls: DECKEL DIALOG 11, with documentation, the tool changer is defective and needs overhauling. ... mais informação
usava
Ano de construção: 2008
usava
X-travel: 500mm, y-travel: 380mm, z-travel: 360mm, main spindle/turning spindle speed: 10,500/ 3000/min, max. axis speed: 60m/min, control: Siemens 840D, with HSK-A63 and collet chuck, some spare parts are also available. ... mais informação
Ano de construção: 1998
usava
X-travel: 1700mm, y-travel: 800mm, z-travel: 800mm, number of T-slots/width/spacing: 5/18/120mm, table dimensions: 1800x700mm, max. workpiece weight: 2.5t, connected load: 16.5kW, weight: 10.1t, with documentation and tool cones, without tools. ... mais informação
Ano de construção: 1999
usava
X-travel: 600mm, y-travel: 400mm, z-travel: 400mm, spindle rotational speed: 63-3150/min, table dimensions: 800x400mm, tool holder: SK40, feed rate: 8-800/min, quill stroke: 105mm, connected load: 4kW, length: 2500mm, width: 2200mm, height: 2200mm, weight: 2.9t, with coolant device, chip guard and tool clamping.
Ano de construção: 1990
usava
Control: Deckel Dialog 11, with vice, an inspection is possible. ... mais informação
Ano de construção: 1980
usava
X-travel: 900mm, y-travel: 300mm, z-travel: 380mm, rotational speed: 28-2800/min, feed rate: 10-630mm/min, connected load: 5.8kW, weight: 1.7t, with dividing head, counter spindle, holders, spare parts, various tools, an inspection is possible. ... mais informação