mandriladoras e centros de usinagem usadas para venda

Manufacturer NEWAY Model VM 1160 H CNC FANUC 0i MF PLUS 15” TOUCH SCREEN Table Table surface 1.100 x 600 mm Max weight allowed on table 750 kg T slots 5 18 mm 100 Capacities Longitudinal Travel (X- Axis) 1.000 mm Transversal Travel (Y-Axis) 600 mm Vertical Travel (Z- Axis) 560 mm Max drilling dia Ø40mm. Max tapping dia M20 mm Milling capacity 200 cm3/min Feeds Rapid feed (X, Y Axis) 36.000 mm/min Rapid feed (Z Axis) 30.000 mm/min Cutting feedrate (X, Y, Z) 1-10.000 mm/min Positioning/ Repetitivity accuracy 3 axis 0.008/0.005 mm. Main spindle Taper BT40 Spindle Speeds 12.000 rpm Spindle head 11/18.5 kW Spindle torque 44.8/59.6 Nm Distance from spindle nose to table 150-710 mm. Distance from spindle center to z axis 660 mm. Automatic Tool Changer Positions in magazine 24 Max tool diameter 80 mm Max tool length 300 mm Max tool weight 8 kg Tool change  ...

Manufacturer DOOSAN Model NM 410HS Year 2008 CNC CNC Fanuc 2liM-B Table Table surface 920 × 430 mm Max weight allowed on table 600 kg T slots 4x125x18H Travels and feeds Travels (X/Y/Z) 762/410/510 mm Distance from table top to nose head 150 – 660 mm Distance from spindle center to column guideway 457 mm. Rapid feed (X, Y, Z Axis) 48.000 mm/min Cutting feedrate (X, Y, Z) 1-24.000 mm/min Main spindle Taper BT40 Spindle Speeds 20.000 rpm Spindle head 11/18.5 kW Spindle torque 60 Nm Automatic Tool Changer Postions in magazine 3 0 Tool selection type RANDOM Max tool diameter (full magazine) 90 mm Max tool diameter (alternative) 150 mm Max tool length 300 mm Max tool weight 8 kg Tool change time (tool to tool) 1.5 s Equipment Rigid Tapping INCLUDED Portable handwheel INCLUDED Longitudinal chip conveyor INCLUDED Internal coolant INCLUDED Coolant t ...

Description: PDF Data Sheet attached in the 'Documents' section Machine declared with approximately 4500 working hours. Equipped with : ACE HP 5100 Evacuator, YOM 2014, 338 kg NANACON CIL1101 refrigeration unit Transformer JEIL TRANS, YOM 2014, 334 kg High pressure unit HIPRECO KHS-230/400214-00244 Not included in sale : ALLMATIC parts holder not included with sale. HEPA filter LNS not included with sale.z-motion: 750 mm, max. workpiece weight between centers: 500 kg, x-motion: 850 mm, y-motion: 700 mm, control: FANUC Series 31i-MODEL B, pallet table size: 500x500 mm, numbers of pallets: 2, taper: ISO#40, 7/24 Taper, toolchanger positions: 80, feed range: 60,000 mm/min, weight approx.: 15,000 kg, Approx. Onsite Dimension. (l x w x h): 6,500 x 4,500 x 3,000 mm

5-axis machine ... mais informação

x-travel:600 mmy-travel:700 mmz-travel:600 mmcontrol:TNC 426 HEIDENHAINtoolpiece magazine: chain magazine:30 Pos.milling spindle - taper:SK 40 turning speeds:12000 1/minrapid traverse:24 m/minweight of the machine ca.:9,5 t5-axis universal machining center,NC-rotary-table,B-axis (milling head)Swarf conveyor,

Workbench included ... mais informação

Description: Serial Number: 183567 , MCR-A5CII 35x65 (5C kit) with OSP-P300M CNC Controller Travel: X-axis: 6.700 mm Y-axis: 4.100 mm Z-axis: 800 mm W-axis: 1.200 mm Table to spindle nose: 0 to 1800 mm Table Dimensions: Working Surface: 3000x6500 mm Maximum Load capacity: 37.000 kg T-Slots (width x Nº): 24 H7 x 15 Height from Machine Bottom: 950 mm Spindle Speed range: 30 to 4.000 min-1 Taper bore: 7/24 Nº 50 Bearing dia meter: Ø 100 Kit 5C Specifications Spindlehead indexing at every 1-degree (instead f STD 5-degree indexing) Extensin attachment head, L150, 6,000min-1, 26kW (for through spindle coolant system) (i/o STD Extension attachment head L150, 4,000min-1) 90-deg angular attachment head, 1-deg L355, 3,000min-1, 11kW (fr through spindle coolant system) There is Y-axis limitation (i/o STD 90-deg angular attachment, L150, 3,000min-1, 22kW) BC attachment 1º 6000 rpm T ...

Magnetic drilling machine; Max. drilling diameter 35 mm drilling diameter; power 1600 watts; connection 230 Volt; magnet strength 16000 newtons; speed 810 rpm; drilling depth 145 mm; including oil reservoir for cooling and lubrication; belt for fall protection; Condition unused, in its original packaging

Description: The DIXI DHP 80 High Precision Horizontal Machining Centre with four axes was used exclusively for the finest machining processes and has never produced rougher chips. A fresh geometric adjustment was carried out in November 2023. Control system Control system: SIEMENS Sinumerik 840D Linear axes Traverse path X/Y/Z axis: 1,200/1,100/1,100 mm , Y distance pallet to spindle (min. - max.): 40 - 1,140 mm Z distance from pallet centre to spindle (min. - max.): 230 - 1,320 mm Work feed: 0 - 10,000 mm/min Rapid traverse: 40,000 mm/min B-axis Table indexing angle min.: 0.0001° Feed rate: 0-10 rpm Max. torque (continuous, nominal torque): 1,040 - 1,828 Nm Spindle with internal coolant supply Nominal spindle motor power: 39 kW Spindle speed max.: 12,000 rpm Spindle holder: HSK A-100 Coolant supply with 70 bar and 20 l/min Automatic FASTEMS pallet changer Pallet storag ...

x-travel:500 mmy-travel:300 mmz-travel:350 mmweight of the machine ca.:5,7 tdimensions of the machine ca.:286 cm x 276 cm x 290 cm mm x 2600mm (ohne Filteranlage u. Späneförderer) mtool magazin::36 tool taper:SK40 turning speed range:0-9000 U/minmain drive motor:18 kW2 Pallet Changer 500 mm x 300 mmincl. 4. axis , fixed on first palletincl. filter mist model AFS 600incl. BLUM tool setterincl. 20 pcs. SK 40 tools ( starter kit ) incl. internal cooling system ( IKZ ) 20 bar and paperfilterincl. chipconveyerincl. Machine documentation: circuit diagrams, electrical plans, operating instructions, etc.Miscellaneous: Machining is possible on the device bridge or the rotary swivel device.Very nice condition , from first hand ( optical industry ) approx 33.500 hours ( spindel ON )

Description: serial no.: P014TL095 operating voltage: 400 V frequency: 50 Hz , nominal current: 17 A jib length: 380 mm , distance between table and spindle nose: min. 150 mm , distance between table and spindle nose: max. 480 mm , with ,3 slots slot width: 14H14 mm , Table height over floor: 815 mm , working spindle: , spindle bearing: 50 mm diameter , tool clamping: 2200 N , Max. tool diameter: 80 mm , Max. tool length: 250 mm , Max. feed force: , X: 2700 N , Y: 2700 N , Z: 5400 N , chiping values: , Max. milling performance: 600 cm³ Max. drill diameter: 20 mm , Max. thread diameter: M 16 , attention: without machine vices on clamping surface and without SK 30 tool holders on tool turret z-motion: 330 mm, max. workpiece weight between centers: 250 kg, x-motion: 500 mm, y-motion: 400 mm, control: FANUC SERIES  ...

x-travel:1300 mmy-travel:610 mmz-travel:810 mmtable surface area:1.450 x 610 mmrapid traverse X- and Y-axis:30 m/minrapid traverse Z-axis:24 m/minspindle taper::SK 40 spindle turning speed range:15.000 1/minmax. torque on the spindle:120 / 48 Nmspindle:18 / 15 kWtool change unit:60 Pos.CNC-control:HEIDENHAIN iTNC 530 weight of the machine ca.:6,8 ttotal power requirement:40 kVAdimensions of the machine ca.:3,45 x 2,6 x 2,75 m5-axis simultaneously-machining center,NC-rotary table D 500mm,controlled milling head (B-axis) +-120°,internal coolant supply 20bar, paper filter,3D-touchprobe RENISHAW,direct measuring system,chipconveyor,approx. 41.500 h "machine on", approx. 15.500 h "spindle on (total)" , last spindle around 4.000 h

weight approx.: 1 kg, Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm ... mais informação

x-travel:1270 mmy-travel:660 mmz-travel:610 mmtable surface area:1500 x 660 mmtable load:1,3 tcontrol:ULTIMAX 4 turning speeds:10000 1/minspindle:15 kWTool bore:SK 40 rapid traverse:X/Y/Z 30/30/20 m/mintool change unit:24 Pos.total power requirement:30 kVAweight of the machine ca.:9,5 tdimensions of the machine ca.:4,8 x 4,56 x 2,95 mvertical machining center, el. handwheel,chipconveyor,

Description: Control: HEIDENHAIN iTNC 530 Serial number: 107.37.00.189 Travels: X: 600 mm Y: 450 mm Z: 450 mm Max. Table load: 200 kg Table dimensions: 320 x 320 mm Spindle speed: max. 20000 rpm Tool magazine: Capacity: 220 tools Workpiece changer with 7 pallet spaces With technical documentation as shown in the picturesApprox. Onsite Dimension. (l x w x h): 4,700 x 4,400 x 2,800 mm, weight approx.: 7,700 kg

Description: Serial number: 11430000953 Spindle hours: 17445 Feed rate X-, Y-, Z-axis: 20 - 15000 mm/min Rapid traverse X-, Y-, Z-axis: 15 m/min Path measuring system: Resolution X-, Y-, Z-axis: 0.001 mm Position tolerance X-, Y-, Z-axis: 0.01 mm Travel: X-axis: 780 mm Y-axis: 560 mm Z-axis: 560 mm Work spindle: HSK-A63 Number of magazine slots: 60 Max. Tool diameter when all positions are occupied: 80 mm With free adjacent positions: 160 mm Max. Max. tool length from spindle nose: 315 mm Max. tool weight: 8 kg Tool weight: 8 kg Pallet changer: Number of pallets: 2 Permissible load of the pallet changer: One side: 400 kg Both sides: 800 kg With NC rotary table Clamping surface, pallet: 500 x 630 mm With T-slots Permissible load of the table: 400 kg Rotary feed: 7200°/min Max. table plate revolutions: 30 mm Rotations of the table top: 30 rpm Spindle speed: 12000 rpm The accessories or cl ...

Description: Serial number: 9902552 Technical data (without guarantee): Spindle speed: up to 17000 rpm Travel distances: X: 7500 mm Y: 1470 mm Z: 600 mm Tool holder type: ISO 30 A-axis: +/- 90° Power of the main motor: 5.5 kW Control system: FAGOR CNC8055i MC FLweight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 8,000 x 2,500 x 2,200 mm

x-travel:630 mmy-travel:500 mmz-travel:500 mmtable-size:800 x 500 mmspindle taper ISO:40 turning speed range:0 - 10.000 U/minfeeds longditudinal/cross/vertical:1 - 30000 mm/minrapid motion -longitudinal/cross/vertical:30 m/minno. of tools in magazin:24 workpiece diameter at full load:80 mmwotkpiece diameter with 2 vacant positions:140 mmworkpiece length:300 mmweight of tools max.:7 kgtable load:500 kgspindle drive:9 / 11 kWcontrol:SINUMERIK 810D total power requirement:30 kVAweight of the machine ca.:4,2 tvertical machining center,el. handwheel,ShopMill,direct measuring system,3D-touchprobe RENISHAW MP 10 ,laser,internal coolant supply,mode 4,airblast,chipconveyor,approx. 42.500 hours on hour meter

Description: serial number: 0233 control : Okuma OSP U100L  , travels: X-axis: 800 mm Y-axis: 800 mm Z-axis: 700 mm 2 pallets, dimensions: ,500 x 500 mm (x2) pallet rotation : 1°/360° spindle taper: SK50 spindle speed: 5000 rpm spindle power: 22/15 kW toolchanger positions: 60 internal spindle cooling chip conveyor accessories: , ready for workpiece probe ready for tool probe (repair required) approx. 15 working tools  , the accessories do not include the clamping tower (Spannturm), which is shown in one of the photos together with the machine  , the machine will be partly dismantled and ready for loading on low plate truck with width of 2,8 m  , please also have a look the the videos and the PDF document of this machine z-motion: 700 mm, x-motion: 800 mm, y-motion: 800 mm, control: Okuma OSP U100L, pallet table size: 500 x 500 mm, numbers of pall ...

Description: serial number: 012001082671 control: FADAL travels: X-axis: 762 mm Y-axis: 406 mm Z-axis: 508 mm max. spindle speed: 10000 rpm max. workpiece weight: 900 kg tool holder: BT40 tool holder positions: 21 z-motion: 508 mm, max. workpiece weight between centers: 900 kg, x-motion: 762 mm, y-motion: 406 mm, control: Fadal, taper: BT40, toolchanger positions: 21, turning speed range: 10,000 rpm, weight approx.: 6,000 kg, Approx. Onsite Dimension. (l x w x h): 2,600 x 2,500 x 2,700 mm