Paver, made Zenith 913, incl. 4 moulds for: - Hollow block 49/ 17.5 / 17.5 cm - Hollow block 30 / 24 / 17.5 cm - Hollow block 36/ 24/ 17.5 cm - Hollow block 36/ 24 / 23.8 cm The machine travels on triangular rails  ... mais informação

1 Gebr. Mixer, Fabr. Haarup Type 750/1 = - Variant: 728 - Fixed output 360 l, with lift, steering wheel, cement/spirit level - Weight: 3100 kg - Control of the system via Mixodatamat - Mixer capacity approx. 360 l  ... mais informação

An overhauled (reconditioned) mobile concrete batching plant Incl. guarantee Manufacturer: Stetter Type: M1 TZ Overhauled in: 2024 Power: 56m3 aggrgate storage / compartment batcher: 4 X 10 m3, total 40m3 Mixers: pan mixer , Stetter T 1000, compacted concrete output 1.00 m3 per charge Dosage: Aggregate wheighing in the skip bucket 2500kg Cement scale 500 kg water dosing hopper 250 kg Additive scale 1 X 12.0 l Control: STETTER MCI 460 (optional GEDIS IBS 33 W possible) operator stand in a office container installed Cement silo: Optionally possible cladding/housing: Optionally possible Delivery time: according to agreement (immediate available) Delivery free construction site possible assembly and commissioning possible by us Price on request Offers and prices are net ex location. Subject to prior sale, subject to errors and/or misrepresentations, withou ...

1 Gebr. Mat Cutting Machine Reinforced design up to single rod 12 mm Passage width 3 m Weight 645 kg  ... mais informação

2 used hydr. Tilting tables = 1 tilting table: Scarf size: - Length 12 m - Width 3.56 m - Parapet height on one side: 0.13 m 2 Tilting table: Scarf size: Length 11 m Width 3.56 m - Parapet height on one side: 0.23 m both with: incl. hydraulic ram incl. vibrator Surface on both tables good condition with signs of wear. Both tables have heating coils for hot water

2 used mortar silos made by Wachter/ Maxit - Capacity approx. 20 tons - Total height approx. 6 m - Ø 2.40 m - Screw conveyor, mixing cabinet and vibrator  ... mais informação

Pruning shears made by Reppel type TU 20-6 = - Weight: approx. 4.0 to -Sheet width/ sheet thickness 6mm  ... mais informação

5 used tilting tables = Formwork width: 2.85 m Scarf length: 12 m Parapet height: 0.23 m Steel Surfaces Condition: Good The load capacity per square meter is 550 kg, walls up to a thickness of 24 cm were made. Incl. heating coils for hot water, incl. 4 hydr. Stamp  ... mais informação

TECHNICAL SPECIFICATIONS Manufacturer: LIEBHERR Description: Semi-Mobile Concrete Batching Plant Type: Mobilmix 2.25R DW Year of construction: 1998 Mixer Nominal Size: 2.25 cbm Throughput (at 30 s mixing time): approx. 100 cbm/h Number of cement silos: 3 pcs. Cement silo capacity: 3 x 80 t (1 double chamber) Number of cement augers: 4 pcs. Pocket row silos: 6 bags (4 x 17.5 cbm, 2 x 35 cbm), Capacity of row silo: 140 cbm Concrete discharge height: 4.0 m Weighing belt maximum load: 6,000 kg Cement scale maximum load: 1,200 kg Spirit level: 600 kg Additive dosage: 25 kg Control: LIEBHERR Litronic (in container) Heating system: Heating oil Recycling plant: FMW Operating voltage/frequency: 400 V / 50 Hz

One used automatic stirrup bender from SCHNELL, model Bar Wiser 22. Bi-directional automatic stirrup bender from bar for the production of stirrups and cut-to-size bars using wires up to Ø 22 mm (#7) . Driven by electric servomotors . Bar Wiser 22N stirrup benders are equipped with: 12.000mm bench Max. pulling speed: 120 m/min (400 ft/min)

Mat bending machine Hambi TV 30 V = reinforced design, up to single rod 12 mm, Passage width: 3 meters, Weight: 645 kg  ... mais informação

One used METAX cutting line from Peddinhaus for bars up to 40mm  ... mais informação

One used good as new SCHNELL AUTOMATIC BAR SHAPING MACHINE BAR WISER 28 Bi-directional automatic bar shaping machine from bar, with 2 bending heads for the production of shaped wires and cut-to-size bars using wires up to Ø 28 mm (#8). Driven by digital electric servomotors. Bar Wiser 28 bar shaping machine is equipped with: - Max. pulling speed: 180 m/min (600 ft/min) - 2 bending units (upper and lower) - Clamp for extraction of the end part of the bar - Virtual mandrel - Web teleassistance

1 used concrete bucket, make summer - Built in 2020, but unused - Content: 1.5 cbm volume concrete measure = - Dimensions L: 2.10 m - W: 1.40 m - H: 1.85 m Outlet: = with vibrator on the hose outlet nozzle  ... mais informação

Steel mould for the production of 2 concrete steps each with nominal lengths of 90cm, 100cm, 110cm and 120cm. The mould has appropriate fittings and pressure plates and must be rebuilt accordingly for each step length. Step height 18cm, tread approx. 27cm. The mould was used on a concrete block machine type Schlosser SV40.

1 Gebr. Column formwork - Twin formwork - Length of formwork 16 m - max. chamber dimension 1.00 x 1.00 m - Steel formwork - incl. 10 vibrators - incl. converter - incl. control system Formwork is hydraulically movable  ... mais informação

1 Gebr. Twin, column and truss formwork Formwork length: 25,000 mm max. concrete part basic height: 1,100 mm max. extension height: 2,000 mm min. concrete part width: 200 mm max. concrete part width, one-sided: 800 mm max. concrete section width, opposite: 600 mm  ... mais informação

1 Gebr. hydraulic tilting table - Dimensions: 16.30 x 3.50 m - Single-sided upstand: 30 cm - height of the table. 85 cm - Steel flooring - the table needs to be reground - without vibrator, but with holding brachets with 3 hydraulic rams  ... mais informação

2 Gebr. Variotop stair formwork for the upside down production of straight prefabricated stairs - Stair formwork type 18/150, consisting of base grate with tilting trestles and shoring - Mechanically centrally adjustable step body with swivelling steps -Integrated hydraulic control unit for the tipping process - Height-adjustable longitudinal parking on one side - Hydraulic control unit for the tipping process - Stairs are concreted overhead - max. 18 steps - Max. nominal width of the steps is 1.50 m - Tread range 250- 310 mm

2 Gebr. Hydraulic Tilting Tables Dimensions table 1 : 14.50 x 4.50 m Dimensions table 2 : 14.00 x 4.20 m with holding bras for vibrators with 2 hydraulic rams.  ... mais informação