Fabricante:
(Categoria: 101)
Gear-driven bench drill. -Maximum distance spindle - table: 410 mm. ... mais informação
Description: Machine number: H-H30608 Operating voltage: 400 V Frequency: 50 Hz Connection: 25 kVA Control system: HURCO WINMAX Travel distances: X: 700 mm Y: 500 mm Z: 600 mm Tool holder: SK 40 Table dimensions: 1000 x 510 mm With 5 grooves With 24-position tool changer Spindle speed: 15000 rpm Attention: the machine vices on the clamping surface are not included in the scope of delivery Incl. chip conveyorweight approx.: 6,000 kg, Approx. Onsite Dimension. (l x w x h): 3,200 x 2,300 x 2,400 mm
Description: Machine number: H-420468 Operating voltage: 400 V Frequency: 50 Hz Connection: 15.0 kVA Control system: HURCO ULTIMAX Travel distances: X: 1060 mm Y: 610 mm Z: 610 mm Spindle speed: 10000 rpm With 24-position tool changer Tool holder: SK 40 Table dimensions: 1270 x 610 mm With 5 grooves Attention: the vices and magnetic chucks on the clamping surface are not included in the scope of delivery The machine is equipped with a chip conveyorweight approx.: 6,000 kg, Approx. Onsite Dimension. (l x w x h): 3,500 x 2,500 x 2,700 mm
Description: The machine package offered here consists of two well-maintained STARRAG HECKERT HEC 500D XXL Horizontal Machining Centres and a Flexible Loading System for 20 workpiece pallets from the renowned manufacturer FASTEMS. FASTEMS Loading system Type: FPC-1000 Number of pallet spaces: 20 ,(10 top row & 10 bottom row) Number of set-up stations: 1 Number of machine connections: 2 Loading system dimensions (L x W x H) approx.: 14800 x 3767 x 4150 mm Max. loading capacity incl. pallet: 1000 kg Max. pallet loading dimensions (L x W x H): 950 x 950 x 1000 mm / Ø 1000 mm Horizontal Machining Centre (data per machine) Control and Machine numbers Control: SIEMENS Sinumerik 840 D Machine numbers: 16334 / 16335 Working area Number of simultaneous axes: 4 Pallet size: 500 x 630 mm Workpiece weight approx.: 800 kg Workpiece dimensions approx. (L x W x H) 950 x 950 x 844 mm / Ø 1 ...
x-travel:800 mmy-travel:700 mmz-travel:600 mmtable load capacity:600 kgcontrol:Heidenhain iTNC 530 turning speeds:8000 1/mintool adaptor:SK 50 tool change unit:60 fach electr. connected load with add. coolant:38 kVAweight of the machine ca.:9 / 11 to. ttransport measurements machine:4 x 2,5 x 2,75 m5 Axis simultaneously machining center,h/v-head and NC- rotary-swivelling-table dia 630mm,prepared for central internal cooling device 40 bar,prepared for IR touchprobe RENISHAW (without probe), mech. tooling breakage control device,minimum quantity lubrication (internal+external),chip conveyor KNOLL,filter mist device ILT,flush-gun,el. handwheel,approx. 43.000 h mainswich ON , approx. 24.000 h Spindle ON
Description: 4-axis horizontal machining center Serial number 213 Working capacity: 720 x 700 x 650 mm Working table: 500 x 500 mm Max. table load capacity: 800 kg Spindle speed: 80-8000 Rpm Automatic pallet changer 2 pallets Pallet change time: 7 sec. Tool magazine with 120 positions Taper BT 40 Max. tool length: 320 mm Tool changeover time: 1.5 sec. Travels: Longitudinal table travel (X-axis): 720 mm Vertical travel of the spindle (Y axis): 700 mm Column longitudinal stroke (Z-axis) 650 mm Distance from the table surface to the spindle axis: 100 - 800 mm Distance from spindle to table center 150 - 800 mm. Rapid feeds: X, Y and Z axes: 36.000 mm/min B-axis: 3 sec/90°. Cutting feed rate: X, Y and Z axes: 0.1~20,000 mm/min B-axis: Not applicable for 1° table Positioning accuracy: X-, Y-, Z-axis: ± 0.001 mm B-axis (1st-360 positions): ± 2 sec. Repeatability accuracy: X-, Y-, Z-axi ...
x-travel:2500 mmy-travel:920 mmz-travel:820 mmtable surface area:3100X900 mmtable load:4,0 tcontrol:840 D powerline shopmill Siemensturning speeds:20-10.000 U/mintool change unit:80 Pos.rapid traverse:50 m/minspindle:(40/100%ED) 48/32 kWmax. torque on the spindle:294 /196 Nmtaper ISO:SK 50 total power requirement:100 kVAweight of the machine ca.:27 tdimensions of the machine ca.:6,40 x 3,30 x 2,85 m4 axis machining center, travelling columncontrolled milling head 1° indexing (B- axis), internal coolant supply 40bar,600l coolant box,3D touch probe,BLUM laser,chipconveyor,prepared for el. handwheel,prepared for dividing wall,prepared for NC-rotary-table appr. 36.000 h ( mainswich ON ) appr. 12.000 h (spindle ON )
Description: 4-axis horizontal machining center Serial number 209 Working capacity: 720 x 700 x 650 mm Working table: 500 x 500 mm Maximum table load capacity: 800 kg Spindle speed: 80-8000 Rpm Automatic pallet changer 2 pallets Pallet change time: 7 sec. Tool magazine with 120 positions Taper BT 40 Max. tool length: 320 mm Tool changeover time: 1.5 sec. Travels: Longitudinal table travel (X-axis): 720 mm Vertical travel of the spindle (Y axis): 700 mm Column longitudinal stroke (Z-axis) 650 mm Distance from the table surface to the spindle axis: 100 - 800 mm Distance from spindle to table center 150 - 800 mm. Rapid feeds: X, Y and Z axes: 36.000 mm/min B-axis: 3 sec/90°. Cutting feed rate: X, Y and Z axes: 0.1~20,000 mm/min B-axis: Not applicable for 1° table Positioning accuracy: X-, Y-, Z-axis: ± 0.001 mm B-axis (1st-360 positions): ± 2 sec. Repeatability accuracy: X-, Y-, Z- ...
x-travel:500 mmy-travel:450 mmz-travel:400 mmturning speeds:20 -10.000 1/mincontrol:HEIDENHAIN iTNC 530 tool change unit:60 Pos.tool taper:SK 40 rapid traverse:24 m/minspindle:13 / 9 kWRound-swivelling table:630 x 500 mmweight of the machine ca.:6,9 t5-axis simultaneously machining center,NC-round-swivelling table B -5 / +110°, C360°,direct measuring system,el. handwheel,flush gun,chipconveyor,infrared touchprobe TS 649, mode 4,DMG netservice,approx. 20.000h "machine on", approx. 6.000h "spindle on"
Description: Basic Machine Universal machining centre DMU 60eVo New DMG MORI Design traverse path X/Y/Z 600/500/500 mm / X/Y/Z 23.6/19.6/19.6 in motorspindle speedMASTER® SK 40/BBT speed range 20 - 18.000 min-1 SK40 speed range 18.000 - 20.000 min-1 SK40-BIG PLUS® 35 kW (40% ED), 25 kW (100% ED) 46.9 hp (40% DC), 33.5 hp (100% DC) tool taper SK40 (DIN ISO 7388-1-A, AD) for Pull-Studs DIN ISO 7388-3-A, AD NC swivel rotary table chain type tool changer with 30 positions and double gripper active cooling direct measuring system full cabin Swarf conveyor (scraper type), spray gun MPC (Machine Protection Control) 3D-Control, ERGOline® control Dynamic package for DMU 60 eVo linear linear drive X/Y-axis with 80 m/min // 262.48 ft/min rapid feed X/Y/Z 80 m/min // 262.48 ft/min, Acceleration X/Y/Z 10 m/s² // 32.8 ft/s² Control CELOS with Siemens 840D sl Operate includes 21,5 ERGOline® Cont ...
Description: Hydraulic Vice Maximum opening: 200 mm. Internal Reference: CBT-084X Approx. Onsite Dimension. (l x w x h): 750 x 300 x 180 mm, weight approx.: 120 kg ... mais informação
x-travel:700 mmy-travel:420 mmz-travel:380 mmcontrol:SIEMENS 840D tool change unit:25 fachtaper ISO:SK 30 turning speed range::10.000 1 / minrapid traverse:60 m/mindiameter of tools max.:80 mmmax. tool length:250 mmmax. tool weight:3 kgfeed power:5.000 Nchange-time chip to chip:1,5 secDimensions (L/W/H):3 x 2 x 2,6 mtotal power requirement:18 kVAweight of the machine ca.:4,1 t5 axis simultaneously milling-drilling machining center,NC-rotary-swivelling table,direct measuring system,airblast outside,el. handwheel,no internal Coolant Supply,no chipconveyor,Approx. 37.000 hours "machine on", approx. 11.600 hours "spindle on"
Quality unchecked. Please note! Pick-up is only possible by appointment! Dimensions: Machine: Length: 4500mm Width: 2760mm Height: 2850mm Weight: 15000kg Oil tank: Length: 1200mm Width: 920mm Height: 1500mm Weight: 150kg Chip conveyor Length: 3600mm Width: 1000mm Height: 1450mm Weight: 250kg Transformer: Length: 1150mm Width: 520mm Height: 1250mm Weight: 100kg Pallet: Length: 800mm Width: 600mm Height: 300mm Weight: 50kg
Description: Hydraulic Vice Maximum opening: 190mm. Internal reference: CBT-083X Approx. Onsite Dimension. (l x w x h): 750 x 300 x 180 mm, weight approx.: 120 kg ... mais informação
x-travel:800 mmy-travel:950 mmz-travel:1020 mmcontrol:HEIDENHAIN iTNC 530 table load capacity:800 kgtool taper:HSK 63 turning speeds:16.000 1/minspindle:35 / 25 kWtable-size:770 mmmax. torque on the spindle:160 / 223 Nmtool change unit:120 (2x60) Pos.weight of the machine ca.:20 tdimensions of the machine ca.:3,3 x 6,15 x 3,2 m5-axis simultaneously machining center with controlled swivel-rotary table (A/B-axis),milling head horizontal,internal coolant device (10-80bar),oilmist-suction,electromech. tool-length measuring device GROB,chipconveyor,3D touch probe,KINEMATICOPT,BLUM laser,el. handwheel,hour meter: approx. 80.500 h "machine on", approx. 48.500 h "spindle on"
Description: Hydraulic Vice Maximum opening: 160mm. Internal reference: CBT-082X Approx. Onsite Dimension. (l x w x h): 560 x 240 x 150 mm, weight approx.: 70 kg ... mais informação