tornos usadas para venda

turning length:630 mmtotal power requirement:16 kWweight of the machine ca.:5 tdimensions of the machine ca.:3400 x 1500 x 1600 mmswing diameter over slide rest:Hinterdrehschlitten 250 mmcentre height:über Hinterdrehschlitten 150 mmcenter height over bed:300 mmturning spindle:Kopf DIN 55021 Gr. 8 centre distance:1000 mmaccessories::2 Schränke Wechselräder

turning diameter:500 mmturning length:1000 mmcontrol:MANUAL PLUS Grundig total power requirement:24 kVAweight of the machine ca.:2650 kgdimensions of the machine ca.:2500 x 1750 x 1850 mmswing diameter over face slide:290 mmchuck:Ø max. 260 mmcross movement:260 mmspindle head:DIN 55027 Größe 8 spindle bore diameter:70 mmrapid travel - longitudinal/face:8 /6 m/minspindle speeds::8 - 2800 tailstock travel:180 mmtailstock quill taper MT:5

number of spindles:8 spindle passage:130 mmCam controlled multi spindle automatic lathe, used8 main spindlesChucker AFH130 for complete machining means front- and back sideControl Siemens Sinumerik 840DIcomplete revising and new configuration of this machine in year 2010.loading arm, for loading and disloading Workpiece turn around station in pos. 4 position 4 with workpiece length controlCNC compound slide in pos. 5coolant pump with magnet candle filtertooling: could be different like pictures option:Ergomat TB42 fot cutting off for half finnishing with FMB-TurboIrrtum und Zwischenverkauf vorbehaltenVisiting under production condition possiblePlease, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

turning length:2000 mmcontrol:- total power requirement:25 kWweight of the machine ca.:3 tdimensions of the machine ca.:3800 x 1800 x 1850 mmswing over bed:500 mmswing diameter over face slide:280 mmcontrol:Zyklen-Steuerung Heidenhain bed width:350 mmDocuments:vorhanden  ... mais informação

number of spindles:8 spindle passage:67 mmCam controlled multi spindle automatic lathe, used8 main spindlespick up in pos. 8threading attachmentCNC compound slide in pos. 5, also 2. speed in pos. 2Hydraulic spindle brake in pos. 4Incl. length measurement, incl. Brankamp cutting force monitoringtooling: could be different like picturesPlease, contact us for getting more informations and pictures on mail@tar-mc.com or www.tar-mc.com

turning diameter over slide rest:280 mmturning length:4000 mmtotal power requirement:7,8 kWweight of the machine ca.:6 tdimensions of the machine ca.:5,9 x 1,9 x 1,40 m ... mais informação

max. turning diameter:395 mmturning length:490 mmcontrol:Fanuc 0i-TF Manual Guide swing dia.:650 mmstandard turning diameter:275 bar material dia.:68 mmspindle bore diameter:76 mmtravel -x axis:235 mmtravel -y axis:100 (±52,5) mmtravel -z axis:580 mmSpindle 1 RPM:4500 1/minSpindle 1 Power:18,5 kWSpindle 1 Torque:209,5 NmSpindle 2 RPM:6000 1/minSpindle 2 power:7,5 kWSpindle 2 torque:51,9 Nmturret stations / rotary tool stations:12/12 BMT 55Power rotary tools:5,5 kWRPM of rotary tools:5000 1/mintorque rotary tools:35 Rotary tool holders:4 Rapid feeds x/y/z:24/10/30 m/minRapid travel B-axis (parts transfer subspindle):24 m/mindimensions of the machine ca.:4125 x 1752 x 2085 mmtotal power requirement:50 kWweight of the machine ca.:4,2 thigh pressure coolant:50 bar Knoll KF110/700 Spindle 1 Chuck:200 mm Spindle 2 Chuck:150 mm Coolant through Mainspindle to Chuck:10 barSamsung turning center ...

turning diameter:220 mmturning length:170 mmcontrol:Fanuc Spindle 1 power:15 kWSpindle 1 RPM:2500 1/minSpindle 2 power:15 kWSpindle 2 RPM:2500 1/minDistance between spindle noses:1100 mmTurret No.1 stations / rotary tools:15/15 Power rotary tools turret 1:4 kWRPM of rotary tools turret 1:3000 1/minTurret No.2 stations / rotary tools:15/15 Power rotary tools turret 2:4 kWRPM of rotary tools turret 2:3000 1/minTravel x/z turret 1:250 / 300 mmTravel x/z turret 2:250 / 920 mmTravel y Turret 1:± 60 mmTravel y Turret 2:± 60 mmBar capacity spindle 1:65 mmBar capacity spindle 2:65 mmpower chuck:254 mm Spindle bore sp. 1:77 mmSpindle bore sp. 2:77 mmdimensions of the machine ca.:4600 x 2900 x 3000 mmweight of the machine ca.:10400 kgUsed CNC Counter spindle turning and milling center with 2 y-axes and gantry loader- SMW210 mm chuck on right spindle. Special chuck on left side is not part of the ...

turning length:140 mmdimensions of the machine ca.:4 x 2 x 1,9 m ... mais informação

number of spindles:6 spindle passage:67 mmcam controlled multi spindle automatic lathesix main spindles D=67mmThis is a sample imagePlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com ... mais informação

number of spindles:6 spindle passage:81 mmcam controlled multi spindle automatic lathesix main spindles D=81mmThis is a sample imagePlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com ... mais informação

number of spindles:6 spindle passage:100 mmcam controlled multi spindle automatic lathesix main spindles D=100mmThis is a sample imagePlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com ... mais informação

Year of Manufacture/SO/GO: -/-/1981 The machine is in good technical condition. Max. circulating diameter: 630mm Distance between spikes: 3000mm Accessories: chuck and bezel By prior arrangement, the possibility of a tour in progress. ... mais informação

The machine is in good technical condition. Circulating diameter above the bed: 550mm Distance between points: 3000mm Accessories: chucks, lunettes Weight: 3220kg Possibility of inspection in operation by prior arrangement. Year of manufacture/SO/GO: 1979/-/1993 ... mais informação

Clamping plate diameter: 3200 mm Max. workpiece diameter: 6300 mm Max. workpiece height: 2500 mm Max. workpiece weight: 5000 kg Stand movement:: 1550 mm Crossbar movement: : 1900 mm ... mais informação

The machine is in good technical condition. Max. diameter above bed: 1050 mm Distance between spikes: 2000 mm Diameter above transverse ram: 727 mm Max. workpiece weight: 5000 kg Spindle caliber: 102 mm Shaft motor power: 22 kW Tailstock: yes Chuck type: 3 jaws Length x width x height: 4860 × 1970 × 1500 mm Weight: 7600 kg Upon prior agreement, the possibility of inspection while in operation.

An important, at the same time vulnerable, spare part for a turning-boring machine 1580L (also compatible with 1563), namely a cross-beam (traverse) produced by KZTS (Kolomna, RF), not used, warehouse storage, 1992 onwards. surface corrosion is not significant, cleaning, grinding and painting should be carried out directly in the workshop before installation. Casting in excellent condition. The part is ready for any inspection. Photo and drawing with exact dimensions are included. Making another new cross member is costly and time consuming.

The machine is in good technical condition. Circulating diameter above the bed: 630mm Distance between points: 4000mm Accessories: chucks, lunettes weight: 3,500 kg Upon prior arrangement, the possibility of inspection while in operation. Year of manufacture/SO/GO: 1979/-/1993 ... mais informação

number of spindles:6 spindle passage:51 mmArticle: cam-controlled multi-spindle automatic lathe with CNC-pickupManufacturer: SchütteType: SF51Yob: 1988six main spindlesfor bars up to D=51mmCNC-pickup in position 6 with rear CNC-machining;electronic cam control Balluff;independent feed position 4;chip conveyor: magnetic belt;oil/stee-running;additional coolant pump with double filter (magnetic cartridge filter).The machine tools shown and not listed are not part of the scope of delivery.The scope of delivery regarding the tooling equipment could be different like pictures.Please, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com

screw-cutting lathe model 1M65 (RMTs 5000 mm) - Ryazan Machine-Tool Plant. Equipment after a major overhaul with modernization of the electrical and mechanical parts of the machine (a frequency converter is installed, the speed box of the machine is modernized (2-stage), the speed is controlled by a joystick) Specifications: Model 1m65 machines are designed for a variety of turning operations, including turning cones and threading: metric, inch, modular, pitch The largest diameter of the workpiece to be installed and processed, mm: over support, mm 650 over the groove in the bed, mm 1400 The biggest length of the workpiece to be processed, mm 5000, The length of the groove in the bed from the cartridge mirror, mm 390 Headstock spindle end size according to DIN 2-15M Number of spindle speed steps 24 Diameter of the cylindrical bore in the spindle, mm 128 Spindle speed limits,  ...