tornos usadas para venda

:KHL-160 | KHL-180 | KHL-200 | KHL-220 turning diameter over bed:1600|1800|2000|2200 mmturning diameter over slide rest:1250|1450|1650|1850 mmturning length:3000/4000/5000/6000/8000/10000/12000/14000/16000 mmbed width:1600/2100 mmworkpiece weight:32t (40t,64t, 80t Option) spindle bore:85 mmspindle taper:120mm taper 1:7 number of spindle speeds:0.86-160 U/minmetrical thread cutting:2-40 mmrange of module thread:1.5-20 mmlongitudinal feed:0.125-4.8 mm:0.063-2.4 mmmovement of the upper support:quer: 700mm/900mm movement of the upper support:längs: 600 mmturning tool - shaft cross cut:70x70 diameter tailstock quill:300/500 mmtaper of tailstock:100 taper 1:7 quill stroke:300 mmsteady rest close/open:400-750/650-1200 mmmain drive motor:80/110 kW4 jaw chuck diameter:1000 - 1600 mmsteady rest diameter:400 - 750 mmopen steady:650-1200 mmCNC controls from:Siemens/Fanuc/Fagor

Description: serial number: P 2141.0012-06 control: SIEMENS Sinumerik ,802  , turning diameter over slide: 315 mm number of controlled axes: 2 travels: X-axis: 150 mm Z-axis: 1000 mm toolchanger positions: 8 turning speed range: 25 - 4000 rpm turning diameter: 315 mm total power requirement: 15 kW  , attention: upgrade to SIEMENS ,Sinumerik ,802, revolver head is broken! turning diameter: 315 mm, serial number: P 2141.0012-06, turning diameter over slide: 315 mm, x-motion: 150 mm, z-motion: 1,000 mm, control: SIEMENS Sinumerik 802, toolchanger positions: 8, number of controlled axes: 2, turning speed range: 25 - 4000 rpm, total power requirement: 15 kW, weight approx.: 3,200 kg, Approx. Onsite Dimension. (l x w x h): 2,900 x 1,800 x 1,700 mm

:LL 550 | LL 750 | LL950 turning diameter:550 | 750 | 950 mmturning length:3000/4000/5000/6000/7000/8000/9000/12000/14000 mmcontrol:Siemens/Fanuc/Fagor center height over bed:475|575|675 mmbed width:990 mmspindle bore:153/230/305/405 mmspindle nose:A2-11/A2-15/A2-20/A2-28 spindle speed:9-600/9-500/7-400/5-250 U/minspindle taper:6 MKspindle drive:22/26 (30/37 opt.) kWtool turret:4/8/12 hydraulisch oder elektrisch tool holder -shaft diameter:32 (40 opt.) mmtailstock quill diameter:165|200 mmtailstock quill adjustment:250 mmtaper in tailstock:6 MKtailstock movement:über Motor travel -x axis:370 | 480 mmtravel - z:= Spitzenweite mmservo motor X-axis:3 | 4 kwservo motor Z-axis:4 | 7 kwrapid power traverse in X-and Z direction:5/4 m/minhydraulic motor:2,2 (2,9 opt.) kWcoolant pump drive:3 (15 opt.) | 15 barweight of the machine ca.:12,7/15,3/18/21,5/24/26,6 | 13,7/16,4/19/22,2/25/27,6/30,2 ...

faceplate diameter:2000 mmswing diameter:2130 mmturning height:1400 mmram stroke range:1000 mmworkpiece weight:10 tfaceplate turning speed range:1 -200 U/minmain drive:60 kWtotal power requirement:95 kWweight of the machine ca.:24 tdimensions of the machine ca.:6,0 x 4,0 x 5,6 mwith CNC SIEMENS 840 DC-axis driven tooling 15/22 kWautomatic toolchnager 16-pocketsthrough spindle coolantsplash guarding and chip conveyor

Quality unchecked. ... mais informação

Description: PINACHO Mustang CNC Lathe machine number: 41101 control unit: Steuerung Fagor 8055 TC tecnical details: center height: 200 mm distance between centers: 1000 mm permitted diamter over guide travel: 400 mm permitted diameter over longitudinal slide: 370 mm permitted diameter over cross slide: 210 mm bed width: 300 mm headstock bore hole main spindle: 65 mm main spindle Nase Camlock no. 6 DIN 55027 morse taper of main spindle: 5 spindle speed 2 constant cutting speed 1st step 0 - 700 rpm, 2nd step 700 - 3000 rpm feeds working range Z, X: 0 - 7000 mm/min. rapid traverse Z, X: 10 m/Min. tailstock shaft diameter: 58 mm tailstock shaft path 155 mm morse taper tailstock: 4 motors: power main motor: 7.5 kW power direct current motor Z-axis in Nm: 12 Nm power direct current X-axis: 4 Nm power of motor pump: 0.57 kW further details: without clamping jaw chuck, with foot switchserial ...

:LL-1250 | LL-1450 | LL-1650 turning diameter:1250 | 1450 | 1650 mmturning length:5000/6000/7000/8000/9000/12000/14000/16000 mmcontrol:Siemens/Fanuc/Fagor center height over bed:705|805|905 mmwidth of cross cariage:600 mmbed width:1370 mmspindle bore:200 mmspindle nose:A2-15/A2-15/A2-20/A2-28 spindle speed:4-400 U/minspindle taper:6 MKspindle drive:22/26 (30/37 opt.) kWtool turret:4/8/12 hydraulisch oder elektrisch tool holder -shaft diameter:40 mmtailstock quill diameter:300 mmtailstock quill adjustment:250 mmtaper in tailstock:7 MKtailstock movement:über Motor (Zahnstangenantrieb) travel -x axis:755 mmtravel - z:= Spitzenweite mmservo motor X-axis:4 kwservo motor Z-axis:7 kwrapid power traverse in X-and Z direction:5 m/minhydraulic motor:1,4 (ab 9m: 3,6) kWcoolant pump drive:15 barweight of the machine ca.:auf Anfrage machine length:15150/16150/17150/18150/19150/20150 mmmachine width ...

faceplate diameter:1800 mmswing diameter:2000 mmturning height:1170 mmz-axis:1000 mmcross rail adjustment - vertical:800 mmfaceplate speeds::2,5 - 280 workpiece weight:12 tfeeds:1 - 6000 mm/minmax. torque on the faceplate:50000 Nmtotal power requirement:85 kWweight of the machine ca.:41 tdimensions of the machine ca.:5,6 x 4,8 x 4,6 mMachine retrofit and overhould in 2005 with SIEMENS 840 D powerline control- 6 jaw hydraulic power chuck- tool changer for 12 tools- chip conveyor, coolant attachment, splash housing- various tool holders

Description: Working size 20 - 100/105 mm - General conditions: the peeling head has been completely overhauled / according to the attached images, the system has been completely checked/cleaned. The plant has been completely checked/cleaned / the entry rollers are present but need to be checked/adjusted accordingly / the roller table in the exit area needs to be replaced. - Important note: the plant is equipped with a chip transport system. PLANT DISMANTLED WITHOUT DOCUMENTS For transport, the following are required: 4 hydraulic jacksweight approx.: 18,000 kg, Approx. Onsite Dimension. (l x w x h): 15,000 x 6,000 x 3,000 mm

Description: Operating hours with pick-up: 125245 hrs. with bar feeder, type FMB, chip conveyor, type P09.04M6258.01, serial 44660 Further technical data can be found in the PDFturning diameter: 20 mm, serial number: 0581 (054), control: FANUC Series 18i-TB, Approx. Onsite Dimension. (l x w x h): 2,400 x 1,200 x 1,700 mm, C-axis simultaneously controllable: Yes, Counter spindle: Yes, Accessories included: Yes, Integrated C-axis: Yes, Tailstock: No, Bar feeder: Yes, weight approx.: 2,200 kg

faceplate diameter:1000 mmswing diameter:1600 mmturning height:1200 mmmain drive:75 kWfaceplate speeds from - to:7 - 800 U/minmilling motor:25 kWmilling head speed:7 - 3000 U/minmilling spindle - taper:ISO 50cross rail adjustment - vertical:800 mmram head dimension:240 x 240 mmweight of the machine ca.:40 todimensions of the machine ca.:9 x 7,8 x 6,0 mMachine general overhould in 2004 and equiped with Siemens 840 D control- tool changer rack magazine- C-axis, live tooling, - Transmit function electronical Y-axis- angular milling head - complete splash housing - coolant device, chip conveyor

Quality unchecked. Provide; 580 cutting hours! driven tool (3600 rpm), C-axis, part catcher, counter center, ... mais informação

Description: Operating hours with pick-up: ,20573 hrs. with bar feeder, type Haas Bar Feeder, Serial 158892, Chip conveyor, type P09.17M8736.01, Serial NP-12332927 detailed technical description can be found in the attached PDFturning diameter: 38 mm, serial number: 0095, control: FANUC 31i-B, Approx. Onsite Dimension. (l x w x h): 3,200 x 1,400 x 2,200 mm, Type of clamping chuck: collet chuck, C-axis simultaneously controllable: Yes, Counter spindle: Yes, Integrated C-axis: Yes, Tailstock: No, Bar feeder: Yes, weight approx.: 4,300 kg

faceplate diameter:1400 mmswing diameter:2000 mmturning height:1500 mmmain drive:80 kWfaceplate speeds from - to:1 - 355 U/minmilling motor:37 kWmilling head speed:7 - 3000 U/minmilling spindle - taper:ISO 50cross rail adjustment - vertical:500 mmram head dimension:240 x 240 mmmax. ram stroke:1250 mmweight of the machine ca.:50 tototal power requirement:133 kVAdimensions of the machine ca.:11 x 5 x 6,4 mMachine general overhould in 2008 and equiped with CNC SIEMENS 840 D control- tool changer for 72 tools- C-axis, live tooling- Transmit function- complete splash housing - coolant device, chip conveyor- diverse accessories

Description: Point width approx. 1500 mm , Turning diameter over bed approx. 940 mm , Turning diameter above support approx. 740 mm , Rod clearance approx. 200 mm Fabrication number 1-206/59 , Power 30 kW , Voltage 3 x 500 V Nominal current 55 A Frequency 50 Hz Control SIEMENS Sinumerik The machine was modernized in 2001 by the Stork companyApprox. Onsite Dimension. (l x w x h): 4,500 x 2,200 x 1,950 mm, weight approx.: 4,500 kg

turning diameter over bed:100 mmturning diameter over slide rest:70 mmturning length:300 mmtotal power requirement:0,8 kWweight of the machine ca.:0,5 tdimensions of the machine ca.:1,0 x 0,6 x 1,2 mPerfect condition table turning machine with belt drive and single tool holder ... mais informação

Quality unchecked. Please note! Pick-up is only possible by appointment! Chuck: 530mm ... mais informação

-DM 800 mm, turning length 5,000 mm, -Flood damage, control not affected, -equipped with 500 mm forkart lining, 2 Lynette DM, -Geom. very good condition, only used for fine work, renewal of the control recommended, very suitable for retrofit, Attention! This machine has already been dismantled and is in storage.

Quality unchecked. ... mais informação

Description: Turning length: approx. 1600 mm Center height above bed: 400 mm Turning diameter over bed: 800 mm Center height above support: 300 mm Turning diameter over support: approx. 600 mm The machine is equipped with a tailstock and a three-jaw chuck (diameter: 180 mm) Spindle speed: 56 - 2250 rpm Incl. two-axis digital readout from the manufacturer ANILAM as well as a faceplate (diameter: 300 mm) and a four-jaw chuck (diameter: 250 mm)Approx. Onsite Dimension. (l x w x h): 3,000 x 1,300 x 1,800 mm, weight approx.: 1,500 kg