Fabricante:
(Categoria: 102)
Controls: Fanuc 32iTB, operational hours counter: 3527h. ... mais informação
Description: Table: 1600mm (manual 4-jaws) Table load: 10 ton Max cutting height: 1720mm (option) Ram size: 308 x 250mm 250 rpm table speed 37/45kw motor 18 position ATC Chip conveyor Includes shipping to any major seaport in the world.turning height: 1,720 mm, swing diameter: 2,000 mm, control: Fanuc 31iT, turning speed range: 250 rpm, total power requirement: 37/45 kW, weight approx.: 30,000 kg, Approx. Onsite Dimension. (l x w x h): 5200 × 3451 x 5639 mm
number of spindles:6 spindle passage:67 mmcam controlled multi spindle automatic lathesix main spindles D=67mmThis is a sample imagePlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com ... mais informação
Quality unchecked. Please note! Pick-up is only possible by appointment! Chuck: 530mm ... mais informação
Number of tool places: 12, controls: Fanuc 32iTB, operating hours: 3611h, with bar feeder IRCO Breuning MUK 7012, standard equipment for TA series: interpolating and bidirectional compensation of mechanical errors by laser measurement, main spindle: oil-cooled main spindle unit, foot pedal for opening and closing the chuck, load indicator for main spindle motor, safety device against chuck opening in case of hydraulic pressure drop.
Description: Re-lathe Weiler Conversion to speed switching for thread cutting including hand lever cross support Dimensions: 1.40m x 0.65m x 1.30m Accessories: disposable pallet 0.60m x 0.40mApprox. Onsite Dimension. (l x w x h): 1,400 x 650 x 1,300 mm, weight approx.: 300 kg ... mais informação
number of spindles:6 spindle passage:81 mmcam controlled multi spindle automatic lathesix main spindles D=81mmThis is a sample imagePlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com ... mais informação
Equipped with 2-axis digital readout. -1.5 kW. - Recording claws: D1-5 / CAMLOCK. -Number of speeds: 8. -Speed range: 70 - 2000 rpm -Main shaft recording: MK4. -Tailstock recording: MK3. -Tailstock diameter: 32 mm. -Incl 3 and 4 claw, adjustment plate, fixed goggles, -Guided glasses, lighting, cooling, change wheels.
Including hydraulic aggregate, an inspection is possible. ... mais informação
Description: Retrofitted with digital displayDrehlänge: 800 mm, turning diameter over bed: 350 mm, turning diameter over slide: 205 mm, spindle bore: 46 mm, turning speed range: 25-2000 rpm, weight approx.: 1,500 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 800 x 1,500 mm ... mais informação
number of spindles:6 spindle passage:100 mmcam controlled multi spindle automatic lathesix main spindles D=100mmThis is a sample imagePlease, contact us for getting more information and pictures on mail(at)tar-mc.com or www.tar-mc.com ... mais informação
Description: Turning diameter Ø on bed: 1500 mm , Between points: 4.000 mm Steady Rest , weight approx.: 11,000 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 9,000 x 2,000 mm ... mais informação
Quality unchecked. Provide; 580 cutting hours! driven tool (3600 rpm), C-axis, part catcher, counter center, ... mais informação
There are two identical lathes available, turning diameter: 600mm, year of construction machine 1/ 2: 1977/ 1987, machine 2 is defective and needs overhauling. ... mais informação
max. turning diameter:395 mmturning length:490 mmcontrol:Fanuc 0i-TF Manual Guide swing dia.:650 mmstandard turning diameter:275 bar material dia.:68 mmspindle bore diameter:76 mmtravel -x axis:235 mmtravel -y axis:100 (±52,5) mmtravel -z axis:580 mmSpindle 1 RPM:4500 1/minSpindle 1 Power:18,5 kWSpindle 1 Torque:209,5 NmSpindle 2 RPM:6000 1/minSpindle 2 power:7,5 kWSpindle 2 torque:51,9 Nmturret stations / rotary tool stations:12/12 BMT 55Power rotary tools:5,5 kWRPM of rotary tools:5000 1/mintorque rotary tools:35 Rotary tool holders:4 Rapid feeds x/y/z:24/10/30 m/minRapid travel B-axis (parts transfer subspindle):24 m/mindimensions of the machine ca.:4125 x 1752 x 2085 mmtotal power requirement:50 kWweight of the machine ca.:4,2 thigh pressure coolant:50 bar Knoll KF110/700 Spindle 1 Chuck:200 mm Spindle 2 Chuck:150 mm Coolant through Mainspindle to Chuck:10 barSamsung turning center ...
Attention! This machine has already been dismantled and is in storage. ... mais informação
turning diameter:220 mmturning length:170 mmcontrol:Fanuc Spindle 1 power:15 kWSpindle 1 RPM:2500 1/minSpindle 2 power:15 kWSpindle 2 RPM:2500 1/minDistance between spindle noses:1100 mmTurret No.1 stations / rotary tools:15/15 Power rotary tools turret 1:4 kWRPM of rotary tools turret 1:3000 1/minTurret No.2 stations / rotary tools:15/15 Power rotary tools turret 2:4 kWRPM of rotary tools turret 2:3000 1/minTravel x/z turret 1:250 / 300 mmTravel x/z turret 2:250 / 920 mmTravel y Turret 1:± 60 mmTravel y Turret 2:± 60 mmBar capacity spindle 1:65 mmBar capacity spindle 2:65 mmpower chuck:254 mm Spindle bore sp. 1:77 mmSpindle bore sp. 2:77 mmdimensions of the machine ca.:4600 x 2900 x 3000 mmweight of the machine ca.:10400 kgUsed CNC Counter spindle turning and milling center with 2 y-axes and gantry loader- SMW210 mm chuck on right spindle. Special chuck on left side is not part of the ...
Attention! This machine has already been dismantled and is in storage. ... mais informação