tornos usadas para venda

CONTROLS  CNC Teach In Controls SIEMENS 810 D BASIC FUNCTIONS  number of spindles: 1 WORKING RANGE TURNING  swing diameter (max): 420 mm  worpiece length max.: 1130 mmMAIN SPINDLE  spindle revolutions (min): 10 /min  spindle revolutions (max): 3000 /min  spindle bore diameter: 51 mmTAILSTOCK  sleeve stroke: 110 mm  sleeve diameter: 70 mm  taper: MK 4 ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  space requirements -left/right-: 3500 mm  space requirements -front/back-: 1500 mm  total height: 1800 mm  total weight approx.: 3500 kgMachine rarely usedFurnishing:- 3 jaw chuck D210- 4 compartments ready change holder

Center height: 360mm, bed width: 430mm, turning length: 1500mm, with documentation. ... mais informação

CONTROLS  CNC Teach In Controls SIEMENS BASIC FUNCTIONS  design principle: flatbed   number of spindles: 1 WORKING RANGE TURNING  swing diameter (max): 720 mm  turning diameter (max): 380 mm  bar diameter (max): 108 mm  worpiece length max.: 1500 mmMAIN SPINDLE  spindle revolutions (min): 0 /min  spindle revolutions (max): 1200 /min  number of gears: 3   spindle bore diameter: 108 mmX/Z SLIDE  traverse velocity Z (max): 5000 mm/min  traverse velocity X (max): 5000 mm/min  rapid traverse Z: 5000 mm/min  rapid traverse X: 5000 mm/min  tool fixture: Steel Holder TAILSTOCK  distance betw. centers (max): 1500 mm  sleeve stroke: 200 mm  sleeve diameter: 120 mm  taper: MK 6 ELECTRICAL SPECIFICATI ...

X-travel: 425mm, swing/ over bed/ slide: 970/ 710/ 370mm, spindle rotational speed: 125-1480/min, max. load: 3t, width: 2630mm, height: 2170mm, with tools, was maintained regularly, an inspection is possible. ... mais informação

A single-spindle pick-up lathe is available, max. swivel diameter: 130mm, spindle in front bearing: 90mm, max. chuck diameter: 160mm, weight: 10t, operating hours: approx. 88,000h, with documentation, an on-site inspection is possible. ... mais informação

SKODA SRM heavy duty lathe Turning diameter over bed 1400mm Turning diameter over support 1000mm turning length 11280mm faceplate 1250mm Workpiece weight in the stands max. 20000kg Bezel 395mm Bezel 620mm workpiece weight 16000kg Total power requirement 40kW  ... mais informação

Vertical turning lathe OM TMS2 35/55N Year 1998 Specification: Table Diameter: 3500mm, Max Turning Diameter: 5500mm, Max Turning Height: 2600mm, Max Loadable Weight: 25000kg, Table Speed: 1~100rpm, Table Driving Motor: AC45kw/55kw, ATC: Storage Tools 12 tools, CNC controller: FANUC-18T

Description: Serial number: 4679 Operating voltage: 220 V Frequency: 50 Hz Connection: 9.2 kVA Circulation diameter over bed: 430 mm Center width: 1000 mm Rotation diameter over cross slide: 250 mm Spindle bore: 50 mm Infinitely variable speeds in two gear stages: 0 - 2500 rpm Drive power: 7.5 kW Rapid traverse: 6000 mm/min Tailstock quill diameter: 73 mm Quill cone: MK 4 Quill stroke: 150 mm Incl. various lathe accessories suitable for the machine and a frequency converterApprox. Onsite Dimension. (l x w x h): 2,200 x 1,800 x 1,800 mm, weight approx.: 1,500 kg

turning diameter:1250 mmswing diameter:1100 mmturning height:1000 mmtotal power requirement:37/45 kWweight of the machine ca.:18 tdimensions of the machine ca.:4500x2520x4605 mmStandard accessories:Chips Conveyor & Coolant TankOil/Water SeparatorMachine Cover (High guarding)Heat exchanger For Electrical CabinetAuto Lubrication in Guide way4 Jaw Manual Chuck 1000mmHydraulic UnitBT50 Tool Connection in RAMMetal frame and case in machine shipment packing(Wooden packing with metal base)3 colors Warning Tower LightChamber lightAnti- Dropping in Z axis -- Auto Motor Brake Systeminstalled options:Air Conditioner For Electrical BoxCoolant Through SpindleFilter Of Coolant WaterCE MarkTransformer

Description: Machine number: 40099 Operating voltage: 3 x 400 V Frequency: 50 Hz Connection: 9.5 kVA Control unit: FAGOR 8055 Center height: 230 mm Center width: 1000 mm Tailstock taper: MK 5 Tool carrier PARAT 4-fold 14 inserts for PARAT carriers 2-stage belt transmission automatically switched Incl. lot steel holder insertsApprox. Onsite Dimension. (l x w x h): 3,000 x 1,500 x 1,900 mm, weight approx.: 2,000 kg

Description: control: FAGOR  , centre height: 260 mm distance between the centres: 1500 mm spindle speed: 2000 rpm power: 20 kW turret head: 4 Pos. control: FAGOR, turning speed range: 2,000 rpm, total power requirement: 20 kW, weight approx.: 2,800 kg, Approx. Onsite Dimension. (l x w x h): 3,000 x 1,500 x 1,800 mm

Description: XZ travel: 580/1000mm 32” hyd. chuck Manual tool presetter Chip conveyor Includes shipping to any major seaport in the world.turning height: 1,000 mm, swing diameter: 1,100 mm, control: Fanuc, turning speed range: 800 rpm, total power requirement: 45/55 kW, weight approx.: 22,000 kg, Approx. Onsite Dimension. (l x w x h): 2,830 x 3,305 x 4,012 mm

Description: SCHERER FEINBAU VDZ 220 XL DS Vertical lathe with Double spindle and Robot cell Serial number and Control Serial number: 68333 Control: SIEMENS Sinumerik 840D sl Working area Workpiece height max.: 200 mm Workpiece diameter max.: 250 mm Rotation diameter max.: 390 mm Spindle stop-turret distance max.: 580 mm Spindle stop-turret distance min.: 240 mm Spindles Spindle speed max.: 5500 rpm Spindle power per spindle: 37.7 kW Spindle torque per spindle max.: 300 Nm Spindle head with short taper (DIN 55026): A6 Axis travel X-axis axis travel (in the work area with closed cover): 365 mm Axis travel X-axis (total): 886 mm X-axis axis travel (via turret centre): -20 mm Axis travel Y-axis: +100/-80 Axis travel Z-axis: 250 mm 12-position disc turret VDI 40 All tool positions driven Max. speed (25% ED): 4000 rpm Max. power (25% ED): 10 kW Torque max. (25% ED): 63 Nm General da ...

turning diameter:300 mmtotal power requirement:2 x 160 kWweight of the machine ca.:2 x 18 tswing dia.:350 mmstroke of vertical slide:250 mmstroke of the horizontal slide:280 mmspindle diameter in front bearing:140 mmspindle turning speed range:80-1120-2800 U/minAvailable from 01.08.2024Flexible rotating cells DV-32-2 In day frame construction consisting of: 2 CNC vertical lathes each with: 1 main spindle and 1 cross slide with CNC Sinumerik 3T suitable for synchronous or asynchronous machining processes With integrated loading and measuring automation

- - -: - - - - - -- - -: - - - - - -- - -: - - - - - -CNC Turning- and Milling Center | INDEX - ABC equipped with bar loader.The machine is in a very well-maintained condition andcan be inspected at any time under power.Technical data of the machine will follow soon.- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -#Tags:The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: EMCO Hyperturn 110 - SM2 - 1700 , Serial number and Control Serial number: H1114020734 Control system: SIEMENS Sinumeric 840D sl Working area Rotation diameter over bed: 720 mm Max. turning diameter: 710 mm Distance between the spindle noses: 1700 mm Traverse paths Traverse path X1 axis: 340 mm Traverse path X2 axis: 300 mm Traverse path Z1 axis: 1340 mm Traverse path Z2 axis: 1340 mm Traverse path counter spindle: 1360 mm Main spindle with C-axis ,(Counter spindle specifications are identical) Angular resolution: 0.001° Spindle nose (DIN 55026): A2-11 Bore in the drawtube with clamping cylinder in mm: 110 x 1000 deep Bore in the spindle: 125 mm Bearing inside diameter in front bearing: 190 mm Bearing inside diameter in rear bearing: 170 mm Workpiece weight in the chuck max.: 500 kg Two tool turrets (specification per turret) Tool positions all driven: 12 ...

turning diameter:220 mmturning length:200 mmcontrol:Fanuc 0i TD mit Manual guide, 10,4" LCD spindle speeds:4800 1/min.spindle nose:A2- 6bar material dia.:44 mmC-axis:0,001 °x-travel:155 mmz-travel:220 mmrapid power traverse in X-and Z direction:20 m/minspindle drive:11/15 KW ( FANUC ßiL12/10000 )coolant:8 barWeight approx.:2,4 tMachine size (LxWxH):1560x1450x1760 mm3-jaw hydraulic chuck:200 mmturret:12-fach, VDI 40 hydraulic unit:mit Lufkühler soft jaw:1 Satz CNC controller:Fanuc 0i TD mit Manual guide, 10,4" LCD Boring bar holder:2 St. 90°-Halter; 2 Stk. Fräshalter, VDI-40 Tool setter:manuell Automatic Pallet :14 Stk. Paletten mit Sicherheitseinrichtung soft jaw:1 Satz+SPECIAL PRICE+SPECIAL OFFER+main features:-high speed-high spindle torque-big spindle bore-automatic forced lubrication-hardened and ground guideways-brand-new design eterior-CE certificate of TÜV Rheinland, Germany ...

Available from 01.08.2024 ... mais informação

turning diameter:420 mmturning length:1130 mmcontrol:Heidenhain manual plus 4110 centre distance with tail-stock:1200 mmspeeds:3-3000 1/minspindle bore:51 mmcutting speed:1-9999 konstant m/mincentre height:210 mmbed width:290 mmspindle head:DIN 55027 Gr. 6 total power requirement:11 / 9 kWweight of the machine ca.:3500 kgdimensions of the machine ca.:2,60 x 1,25 x 1,65 hoch mteach-in lathe,3-jaw-chuck dia. 210mm,PARAT toolholder - system incl. tools (see photo), cooling system,accessories (see photo)no hour meter

Description: control: ,SIEMENS SIEMATIC HMI after dep retrofit ,not used at production again Approx. Onsite Dimension. (l x w x h): 3,000 x 1,300 x 1,900 mm, weight approx.: 6,000 kg ... mais informação