tornos usadas para venda

Type 500G - Iemca Mini Boss 325/32 barfeed - tool eye - Fanuc 16-T Control  ... mais informação

equipped with Iemca Boss 432r/32LL new in 2002 - some tool holders - chip conveyor - Mitsubishi MELDAS 635 Control  ... mais informação

Stock Number: 3780 CNC LATHE Manufacturer: EMCO, Type: HYPERTURN 665 MC PLUS Machine NO.: R7AQ2301, Year of manufacture: 2002 Specifications: Max. swing diameter 430 mm dia. Max. rotary. About Bed 600 mm Dia. Turning length 744 mm Distance between spindle lugs 975 mm Main engine power 21/29 kw Main spindle speed range 0-5000 rpm Bore through drawing tube 65 mm dia. C axis - main spindle movement 0.001 degree Y axis 100 +/- 50 mm B Axis Movement Stepless 45 Degree Tool turret 1 with 12 VDI 30 stations Powered stations turret 1 12 pc. - 4000 rpm Y+B pieces. Engine power driven tools 6.7 Kw Tool turret 2 with 12 pc. VDI 30 stations Counter spindle C axis - counter pindel movement 0.001 degree Counter spindle speeds 0-5000 Pr/min Motor power counter spindle 17/22 Kw Control Siemens 840 D Fabr. Power on 10650 hours Controlled in 8 ax ...

Stock Number: 3781 CNC LATHE Manufacturer: WFL , Type: M 55 x 2000 Machine NO.: 085144/01, Year of manufacture: 1998 Specifications: Max. swing diameter 460 mm dia. Max. rotary. About Bed 640 mm Dia. Turning length 2000 mm Turning over canvas slide 550 mm dia. Main spindle din 55026 form A Main engine power 37 kw Main spindle speed range 18.5 - 3150 rpm C axis - main spindle movement 0.001 degree Y axis 300 (-130/+70 mm B Axis Motion 180 degree - 0.001 degree B axis spindle speed 1-3000 per/min B axis tool system ISO 40 - 24 Tools Tool turret 1 with 12 VDI 50 stations Accessories: Hydr. Chuck main spindle Forkardt FNC 250-65 mm dia Chip conveying. Cable tow Hydraulic tailstock. Hydr. Bezel Forkardt LZ 12-155 Length: 5700 mm Transport , Height: 3000 mm, Width: 2500 mm Transport , Weight: 15.000 kg

Condition of the machine: The machine is currently still in production and powered by the original owner. The CTX 310 is in very good mechanical condition, running in small parts production with light machining (11834 spindle hours). The machine can be viewed under power in our warehouse, probably from the end of May/beginning of June. 07 Machine Accessories: - Control Heidenhain IT-Plus -Conveyor - Driven tools and tool holders (used) - 1 piece of jaw lining with used jaws - Parts catcher - C-axis, X-axis and Z-axis - Tailstock MK4 with hydr. Clamping (Footswitch) - 4 driven tools (2 brackets and 2 front holders) - Tool holder VDI30

Condition of the machine: The machine is currently still in production and powered by the original owner. The CTX 420 is in very good mechanical condition, running in prototype construction with light and small machining (9981 spindle hours). The machine can be viewed in our warehouse under power, probably from the end of May Accessories Machine: - Control SIEMENS 840D Powerline with SHOP TURN - Suction (see picture) -Conveyor - Driven tools and tool holders (used) - 1 cheek lining - 1 collet chuck - Parts catcher with outfeed conveyor - C-axis, X-axis, Z-axis and Y-axis - Tailstock MK4 with hydr. Clamping (Footswitch) - 10 swivel holders - 8 pcs. normal angle holders - 6 driven tools (3 brackets and 3 front holders)

Used lathe Internal machine number m3533 Manufacturer: Colchester Type Triumph 2000 Ma.Number 36658 Center width 750 mm Center height 190 mm Spindle bore 54 mm Speeds 25 to 2,000 rpm. Weight approx. 1,200 kg With cabinet and accessories Location: 59425 Unna The machine can be viewed and tried out under electricity. We will be happy to send you more photos by e-mail. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to ...

Turning diameter over bed 490 mm Center width 1500 mm Spindle bore 63 mm Spindle speed 2240 min-1 Chuck diameter 250 mm 2 x Bezel Tailstock Multifix  ... mais informação

Control OSP P20L-R Max. turning diameter 300 mm Max. turning length 450 mm Spindle speed 3000 min-1 3-jaw chuck diameter 210 mm 12-speed revolver with attached Competition. Conveyor  ... mais informação

Control: Fanuc 32i Rotary memeser 380 mm Main spindle D=65mm Speed 4000 rpm Holding brake C-axis Tool carrier 1 X/ Z axis 220/ 600 mm working distance Tool carrier 1: 14 shots (VDI 30)/ 7 attached Tools Tool carrier 2 X/Z axis 110/650 mm working distance Tool carrier 2: 7 shots (VDI 30) + 3 UniFlex -52 Tool measurement ATC Chip-federals

Control Bosch CC200 Turning diameter 160 mm Turning length 460 mm Speed 4000 1/min 12-fold revolver with 6 antr. Tools Spindle passage 70 mm Tailstock Conveyor 3-jaw chuck Röhm Accessories  ... mais informação

digital display swingdiameter over bed 800 mm swingdiameter over slide 600 mm distance between center 2000 mm spindle speed750 1 / min multifix tailstock  ... mais informação

Control MANUAL PLUS CNC 2-axis cycle control Turning diameter 500 mm Turning length 1500 mm Turning diameter over carriage 290 mm Flat travel 260 mm Speed 2800 1/min. Tool holder at your fingertips Tailstock  ... mais informação

Control SIEMENS Swing diameter over bed 350 mm Turning diameter 180 mm Distance between centers 500 mm Spindle speed 4000 min-1 Tailstock Multifix Accessories  ... mais informação

The machine was partially overhauled. Specifications: Center height: 220 mm Center width: 600 mm Spindle bore: 50 mm Bed width: 300 mm Speeds: 31.5 - 1400 rpm Tailstock mount: MK 4 Quill stroke: 150 mm Feeds: Longitudinal slide: 0.06 - 0.8 mm/rev Axial slide: 0.044 - 0.6 mm/rev Motor power: 4 kW Weight, approx.: 1500 kg Dimensions (WxDxH), approx.: 2150 x 110 x 1750 mm Equipment: - 3-axis digital display, Heidenhain brand - 3-jaw lathe chuck, brand Forkardt 200 mm - Emergency stop push button - Quick-change holder System Multifix - Tension spindle cover - Lathe chuck protection with limit switch protection - Machine light - Coolant device The following work was carried out: - Machine partially disassembled - Damaged bearings replaced - Guides ground in X- and Z-axis - Tool holder of the tailstock quill ground - Wiper renewed - Partial handwheels rene ...

The machine was partially overhauled. Built in 1981 Specifications: Center height: 220 mm Center width: 600 mm Spindle bore: 50 mm Bed width: 300 mm Speeds: 31.5 - 1400 rpm Feeds: Longitudinal slide: 0.06 - 0.8 mm/rev Axial slide: 0.044 - 0.6 mm/rev Tailstock mount: MK 4 Gahvxg7a Quill stroke: 120 mm Motor power: 4 kW Weight, approx.: 1500 kg Dimensions (WxDxH), approx.: 2150 x 1100 x 1750 mm Equipment: - 3-axis digital display, Heidenhain brand - 3-jaw lathe chuck - Lathe chuck protection with limit switch protection - Quick-change holder System Multifix - Tension spindle cover - Emergency stop push button - Coolant device - Machine light The following work was carried out: - Machine partially disassembled - Damaged bearings replaced - Guides ground in X- and Z-axis - Tool holder of the tailstock quill ground - Wiper renewed - Partial handwheels r ...

The machine was partially overhauled. Specifications: Center height: 220 mm Center width: 600 mm Spindle bore: 50 mm Bed width: 300 mm Speeds: 31.5 - 1400 rpm Tailstock mount: MK 4 Quill stroke: 150 mm Feeds: Longitudinal slide: 0.06 - 0.8 mm/rev Axial slide: 0.044 - 0.6 mm/rev Motor power: 4 kW Weight, approx.: 1500 kg Dimensions (WxDxH), approx.: 2150 x 1100 x 1680 mm Equipment: - 3-axis digital display, Heidenhain brand - 3-jaw lathe chuck, brand Forkardt 200 mm - Quick-change holder System Multifix - Tension spindle cover - Lathe chuck protection with limit switch protection - Machine light - Coolant device The following work was carried out: - Machine partially disassembled - Damaged bearings replaced - Guides ground in X- and Z-axis - Tool holder of the tailstock quill ground - Wiper renewed - Partial handwheels renewed - Glass scales overhaule ...

Okuma LU 35 M. Sold on behalf of the customer. Further data on request. Inspection possible in operation.  ... mais informação

For sale: Citizen cnc sliding head lathe type M32 with FMB 3 meter bar loading magazine. Max. spindle diameter is 32 mm. Max. drilling diameter is 12 mm. Max. tap diameter is M12. Maximum speed of main and side spindle is 8,000 rpm. Furthermore, this Citizen cnc longitudinal lathe is equipped with a 10 position turret with driven positions, a chip conveyor, Coolblaster high pressure system type CB-510 etc. Available on short notice, subject to prior sale.

Control Sinumerik 810 D Circulation diameter over bed 490 mm Circulation diameter over face carriage 280 mm Turning length 1,000 mm Spindle bore 93 mm Speed ranges 1-625 / 1-3,000 rpm Drive power 16 kW Dimensions approx. 3.0 m / 1.8 m / 2.0 m Machine weight 3.6 t Tailstock stroke 180 mm  ... mais informação