tornos usadas para venda

- Siemens Sinumerik control - Chip conveyors - Coolant system - Built in 2002 Technical data - Circulation diameter: 235 mm Sledge path: - Z-axis (vertical): 250 mm - X-axis (horizontal): 450 mm + 370 mm - Workpiece height: 100 mm - • in the front bearing: 90 mm - Spindle head with short cone DIN 55026: A5 - Hollow shaft motor with oil circulation cooling: integrated into the spindle box - Rated power 100% ED: 29.3 kW - Nominal torque 100% ED: 200 Nm - Rated speed: 1400 rpm - Maximum speed: 6500 rpm - Travel speed Z-axis: max. 30 m/min - Travel speed X-axis: max. 60 m/min

L + Z Lathe KNUTH 1000 A L + Z Lathe KNUTH Type 1000 A Masch. No. 118 255 Year of construction 1999 Center width 1000 mm max turning diameter over bed 400 mm Tip height above bed 200 mm max turning diameter over support 240 mm Turning diameter without bridge 580 mm Length of bridge: 52 mm Spindle bore 52 mm spindle cone: MK 6 Quill cone: MK 4 Spindle speed 30-1600 rpm. 12 steps Longitudinal feeds 0.04 – 1.06 mm Transverse feed 0.02 – 0.53 mm Tapping (30) 0.45 - 20 mm Tailstock quill 130 mm Power supply 400 volts, 50 Hz, 6.6 kW - 3-axis digital display position indicator - KNUTH, - Spindle speed over 15 gear stages - 3-jaw lathe chuck Ø 250 mm -4 Jaw chuck never used. new - Quick-change steel bracket Multifix size B with 3 inserts - Coolant tank with pump in the machine base - Spindle brake with foot pedal - Foldable chuck protection - Splash guard - Eme ...

Tip height: 102 mm Top width: 450 mm Spindle bore: 32 mm Reduction gear Links.-right rotation 2-stage drive Vario speed: 270-3000 rpm Knee circuit Turning diameter over bed: 200 mm Spindle nose: W 20 Tailstock Quill: MK 2 Dimension (Lxwxh): approx. 140 x 56 x 123 cm Weight: approx. 550 kg Accessories available Manual available The machine is located in a clean good condition!

Tip height 102 mm Top width 450 mm Leit.-/ spindle Collets W20 available Rotational speed: approx. 210 3000 rpm Reduction gear Links.-right rotation 2-stage drive L x W x H: CA. 1760 x 595 x 1230 mm Weight: approx. 650 kg  ... mais informação

Tip height: 130 mm Top width: 450 mm Rotational speed: approx. 55-3000 rpm Pneumatic clamping system Spindle nose: W 25 Div. W25 collets available Div. holder available BERGER LAHR axis motors Combitec EIP E-500 control Manual control available Coolant system available Machine lamp available Machine feet available Dimension (Lxwxh): approx. 1400 x 560 x 1230 mm Weight: approx. 550 kg The machine is located in a clean good condition!

Heid 270-57-1500 - Universal lathe - Distance between centers: 1500 mm - Swing Ø: 540 mm - Spindle bore: 57 mm - Dimensions WxHxD: 3420 x 1400 x 1350 mm  ... mais informação

ZMM CU 502 - Universal lathe - Center height: 250mm - Distance between centers: 1500 mm - Swivel Ø above the bed: 500 mm - Swivel Ø above the carriage: 240 mm - Spindle bore: 72 mm - Spindle speed: 16 - 2000 rpm (18 steps) - Engine power: 10 kW - Operating voltage: 400 V / 15 - 25 A - Dimensions WxHxD: 3100 x 1400x x 1250 mm - Weight: approx. 3120 kg

- Siemens Sinumerik 802S CNC control - 3-jaw chuck with interchangeable jaws Ø 120 mm - 4-fold tool changer - Coolant device - Full enclosure - Year of construction 2013 Specification - Center width: 700 mm - Center height: 140 mm - Circumferential Ø above bed: 266 mm - Spindle bore: 26 mm - Spindle cone: MK4 - Bed width: 180 mm - Spindle speed: 30 - 4000 rpm - Speed levels: 30-300 / 140-1400 / 300-3000 / 400-4000 rpm - X-axis travel: 180 mm - Z-axis travel: 465 mm - Feed speed X-axis: 3000 mm/min - Feed speed Z-axis: 2500 mm/min - Tool slots in the tool changer: 4 - Tool changer pick-up height: max. 12 mm - Tailstock mount: MK2 - Tailstock quill stroke: 85 mm - Motor power: 1.5 kW - Coolant pump motor power: 40 W - Coolant tank capacity: 12 l - Machine dimensions WxHxD: 1685 x 1885 x 805 mm - Weight: approx. 420 kg

Ergomat TBC 60 - Multi-slide turning center - as good as new exhibition machine - Rod passage: 60 mm - Tool holder: VDI 25 Compact multi-carriage turning center with eight CNC axes, two-channel control and backside machining. Developed for the ready-to-use production of complex turned parts. - Fanuc 31i-TB dual-channel control - 8 CNC-controlled axes - 2 vertical shaped slides and piercing slides - CNC cross slide at the front - Rear CNC cross slide with servo-driven Sauter turret and driven tools - Tapping spindle integrated in the turret - Astonishingly short cycle times - Backside processing - Coolant device - Generously dimensioned working area for unhindered chip fall - Chip collector - Year of construction: 2021 Specifications: Rod passage: - Round material: 60 mm - Hexagonal material: 52 mm - Square material: 42 mm Main drive: - max. spindle speed: ...

- 3-cheek lining - 4-cheek lining - fixed bezel - running bezel - 3-axis position display Sino SDS6-3V - Multifix Type E incl. 4 holders - Splash guard - Oil pan - Lighting system - Foot spindle brake - Coolant sealing - Steel stand with 3 drawers and cabinet door - Reduction sleeve - Spare gears Technical data: - Circulating Ø over bed: 360 mm - Circulation Ø over slide: 212 mm Ø without bridge: 490 mm - Center width: 1000 mm - Bed width: 187 mm - Spindle bore: 51 mm - Metric threads: 0.2 - 5 mm (28 steps) - Inch thread: 8 - 112 tpi (36 steps) - Module thread: 0.2 - 3 mm (22 steps) - Thread with diametrical slope: 8 - 112 dp (36 steps) - Longitudinal feed: 0.050 - 0.696 MM (36 steps) - Transverse feed: 0.013 - 0.188 mm (36 steps) - Tailstock Pinoleenaufnahme: MK3 - Tailstock Pinoleenhub: 100 mm - Motor power: 1.5 kW - Dimensions WxHxD: 1925 x 1510 x 75 ...

Voest DA210 - 210/48/1500 universal lathe Centre distance: 1500 mm Tip height: 210 mm Turning diameter over bed: 430 mm Swing over carriage: 280 mm Quill recording: MK4 Spindle bore: 48 mm Bed width: 330 mm Speeds: 12 Speed range: 21-1500 rpm Feed speed: 0,072-4.04 mm Metric threads: 0.5-28 mm Inch thread: 1-56 tpi Motor power: 3 kW Voltage: 400V Dimensions WxHxD: approx. 2700 x 1400 x 800 mm Weight: 1500 kg Facilities: 4 - jaw Chuck, tracking grains u.m..

- Sino SDS6-3V 3-axis position display - magnetic and manual spindle brake - 3 jaw chucks ø 250 mm - 4 jaw linings ø 320 mm - Stop Z-axis - fixed & running bezels - Multifix Type C incl. 4 holders - Face disc - Lighting system - Coolant sealing Specification - Center width: 1000 mm - Circulating Ø over bed: 500 mm - Circulation Ø over slide: 325 mm - Orbital Ø in eruption: 630 mm - Bed width: 330 mm - Spindle bore Ø: 80 mm - Spindle cone: Metric 80 C8 / D1 - D8 - Speed range: 24 - 1600 rpm - Speed levels: 15 - Metric threads: 0.5 - 28 mm (66 steps) - Inch thread: 1 - 56 tpi (66 steps) - Module thread: 0.5 - 3.5 mm (33 steps) - Thread with diametrical slope: 8 - 56 dp (33 steps) - Longitudinal feed: 0.072 - 4.038 mm/rev (66 steps) - Transverse feed: 0.036 - 2.019 mm/rev (66 steps) - Tool holder: 25 x 25 mm - Tailstock Pinole Ø: 65 mm - Tailstock pinole ...

- Sino SDS6-3V 3-axis position display - magnetic and manual spindle brake - 3 jaw chucks ø 250 mm - 4 jaw linings ø 320 mm - Stop Z-axis - fixed & running bezels - Multifix Type C incl. 4 holders - Flat disc ø 430 mm - Lighting system - Coolant sealing Specification - Tip width: 2000 mm - Circulating Ø over bed: 600 mm - Circulation Ø over slide: 360 mm - Circulating Ø in eruption: 730 mm - Bed width: 330 mm - Spindle bore Ø: 80 mm - Spindle cone: Metric 80 C8 / D1 - D8 - Speed range: 24 - 1600 rpm - Speed levels: 15 - Metric threads: 0.5 - 28 mm (66 steps) - Inch thread: 1 - 56 tpi (66 steps) - Module thread: 0.5 - 3.5 mm (33 steps) - Thread with diametrical slope: 8 - 56 dp (33 steps) - Longitudinal feed: 0.072 - 4.038 mm/U (66 steps) - Transverse feed: 0.036 - 2.019 mm/U (66 steps) - Tool holder: 25 x 25 mm - Tailstock Pinole Ø: 65 mm - Tailstock ...

Voest DA180-52-800 - Universal lathe - the machine is completely revamped and as good as new - CE conformity - Sino SDS6-3V 3-axis position indicator - 3-jaw lathe chuck Ø 200 mm - Multifix Type B - Coolant device - Work area lighting Specification - Center width: 800 mm - Center height: 180 mm - Turning diameter over bed: 380 mm - Turning diameter via slide: 200 mm - Quill holder: MK4 - Spindle bore: 52 mm - Bed width: 330 mm - Speed levels: 12 - Speed range: 33 - 1500 rpm - Feed speed: 0.072 - 0.54 mm - Metric threads: 0.5 - 3.625 mm - inch thread: 7 - 46 tpi - Motor power: 3 kW - Voltage: 400V - Dimensions WxHxD: approx. 2100 x 1650 x 1050 mm - Weight: approx. 1200 kg

CNC-heavy duty lathe Kramatorsk 1A660 Year of manufacturing: 1984 Distance between centers: 11.500 mm Turning diameter: -Over bed: 1650 mm -Over cross slide: 1340 mm Work piece weight: max 25 tn Spindle bore: 105 mm Spindle speed range: 0,5 - 250 rpm Cross slide travel: 735 mm Spindle stock pinol travel: 260 mm Threads: -Meter: 1 - 96 mm/r -Whitworth: 20 - 3/8 -Modul thread -D-P thread Size: -Length: 17.100 mm -Width: 2.800 mm -Height: 2.000 mm -Weight: 46,5 tn Control: Bosch M5

Heavy duty lathe Waldrich Distance between centers: 12000 mm Turning diameter: -Over bed: 2000 mm -Over cross slide: 1640 mm Weight of work piece: max 40 ton Spindle speed range, stepless: 1,5-92,5 rpm Year of manufacturing: 1960  ... mais informação

Machine type: CNC turning and milling center Manufacturer : EMCO Type EmcoTurn E65 Year of construction 2007 Control Sinumerik 810 D Siemens Storage location Sweden Country of origin: Austria Delivery time by arrangement Cargo Base EXW Technical description Travel: X-axis : 210 mm Z-axis : 610 mm C-axis : 360° max. oscillating diameter above bed : 540 mm max. oscillating diameter over face slide: 360 mm max. turning diameter : 310 mm max. turning length: 520 mm max. rod diameter 65 mm Center width: 650 mm Main Spindle: Speed range - main spindle 60 - 4,200 min/-1 Drive power - main spindle 18 / 15 kW Max. torque 192 Nm Spindle head DIN 55026 / KK6 C-axis 0.001° Tool turret: 12 positions Tool holder VDI 30 DIN 69880 Driven tool stations: Number of driven tool stations 12 pos. Speed range - addressed Tool stations 0 - 5,000 min -1 Drive power ma ...

Turning-milling center Manufacturer : Emco Type: Hyperturn 665 Plus Power Mill Control : Siemens Year of construction : 2006 Duty on hours : 56000 h Spindle hours : 22722 h Availability: Workspace Circulation diameter over bed 600 mm Circulation diameter over face carriage 500 mm Distance between the two spindle lugs 975 mm Max. turning diameter 430 mm Max. part length 744 mm Max. bar diameter 65 (76.2) mm Travel range Travel X/X2 280/205 mm Travel Z/Z2/Z3 900/750/750 mm Travel Y 100 (+/–50) mm Main spindle Speed range (infinitely adjustable) 0 – 5000 (4000) rpm Torque max. 250 Nm Spindle connection DIN 55026 A2-6 (A2-8) Spindle diameter in front bearing 105 (130) mm Spindle bore (without tension tube) Ø 73 (86) mm Counter spindle Speed range (infinitely adjustable) 0 – 7000 rpm Torque max. 130 Nm Spindle connection DIN 55026 A2-6 Spindle diame ...

Okuma LU3000 EX-MY 2SC 950 BigBore Year of construction : 08/ 2014 Control : OSP P 300 L Suite Power on : approx. 300 h Spindle run : approx. 100 h Specifications Rotation range up to Ø [mm] 340 Vibration diameter over cross slide / bed [mm] 340/580 Travel X-axis tool carrier "A" [mm] 260 Y-axis travel tool carrier "A" [mm] 120 (+70/-50) Z-axis tool carrier travel "A" [mm] 630 1.030 Travel X-axis tool carrier "B" [mm] 160 Z-axis tool carrier travel "B" [mm] 615 1.015 Spindle: Main spindle - speed [1/min] 42-4200 Main spindle - power [kW] 22 Main spindle - torque [Nm] 427 Main spindle - bore Ø [mm] 80 Main Spindle - Nose A2-8 Feed: Rapid traverse X/Y/Z - axes [m/min] 25/15/30 Rapid traverse C - axis [1/min] 200 Working feed X/Z - axes [mm/rev] 0.001-1.000 Tool carrier "A": Tool system BMT 60 Okuma Tool Slots [pcs] 12 Driven Tools [pcs] 12 Driven tools - sp ...

Lathe Weiler E35 Year of construction: 1997 Center height: 200 mm Distance between centers: 950 mm max. turning length 950 mm maximum turning diameter over bed 410mm maximum turning diameter over face slides 200 mm max. workpiece weight 900 kg Complete with documentation and many accessories, see photos