tornos usadas para venda

RAFAMET KCI 320/400N CNC vertical turret lathe manufactured in 2011 in Poland, can perform complex production programmes on large-size workpieces, thanks to one turning head and three milling heads set at different angles. The machine, with its compact frame structure made of high-quality grey cast iron, is distinguished by its high geometric stability, high rigidity and excellent vibration damping. The CNC vertical turret lathe KCI 320/400N performs precision turning, milling, drilling and boring of cylindrical, conical and curved surfaces with the aid of the applied heads. One of them is a special milling head (offset), used to perform drilling and milling operations with the position of the tool axis offset from the spindle axis in a direction parallel to the slide travel plane. On the other hand, the turning head allows to mount CAPTO turning tools in horizontal and vertical socke ...

C 6250 x 2000 conventional lathe was manufactured in 2010 in China. The machine, characterised by a rigid design with an induction-hardened bed significantly increases the production capacity of any workshop and factories with the utmost precision. The spindle, with adjustable speed from 11 to 1600 rpm is driven by a reliable and high-powered main motor, which is used for versatile tool use. The C 6250×2000 universal lathe with digital readout in three axes weighs 2640 kg. Technical data of the C 6250 x 2000 metal lathe - maximum workpiece length: 2000 mm - turning length in bridge choice: 210 mm - workpiece diameter (turning in bridge choice): 720 mm - workpiece diameter (turning above bed): 500 mm - workpiece diameter (turning over slide): 300 mm - longitudinal feed range: 0.028 – 6.33 mm/rev - transverse feed range: 0.014 – 3.16 mm/rev - maximum spindle speed: 1600 rpm ...

NAKAMURA-TOME SUPER NTM3 CNC turning centre was manufactured in 2004 in Japan. Distinguished by its wide machining capabilities and extensive equipment, the machine allows fully automated production processes, while maintaining high precision and reduced operating costs. The high-quality construction additionally effectively dampens any vibrations and ensures maximum process stability, which results in excellent turning results. Workpieces are machined in up to 11 axes using reliable tools stored in three 24-position tool heads. The NAKAMURA SUPER NTM3 CNC lathe is offered with an extensive range of equipment including a BREUNING IRCO SiMag bar feeder, a FANUC 16i-TB CNC controller and additional toolholders. The CNC dual-spindle lathe weighs 12000 kg. Technical specifications of the NAKAMURA-TOME SUPER NTM3 CNC lathe - number of axes: 11 - CNC control: FANUC 16i-TB - number of  ...

GILDEMEISTER MF TWIN 65 Y CNC-Drehmaschine die 1999 in Deutschland gebaut wurde, ermöglicht vollautomatische Produktionsprozesse bei hoher Genauigkeit und niedrigen Betriebskosten. Die Maschine, die sich durch ihre umfangreichen Bearbeitungsmöglichkeiten auszeichnet, ist dank ihrer robusten Bauweise, der umfangreichen Ausstattung und dem Fokus auf hohe Produktivität ideal für jeden Produktionsbetrieb, selbst bei anspruchsvollsten Herausforderungen. Das CNC-Drehzentrum MF TWIN 65Y führt Präzisionsbearbeitungen von Metallwerkstücken mit einem maximalen Durchmesser von 200 mm durch, wobei zuverlässige Werkzeuge in zwei Werkzeugköpfen mit 12 Positionen (oben und unten) eingesetzt werden. Das Drehen der Werkstücke findet in einem großen Arbeitsraum statt, der mit einem um 45° geneigten, starren Bett und einem integrierten Späneförderer ausgestattet ist, der den Arbeitsraum sa ...

TORNOS MICRO-8 CNC turning centre built in 2008 in Switzerland is distinguished by its extensive machining capabilities, sturdy design made of the highest quality cast iron and compact size. The machine designed for ultra-precise machining of workpieces with a maximum diameter of 10 mm is equipped with two reliable spindles to maximise production efficiency in any production facility, even during the most demanding challenges. The main spindle and counter spindle with integrated thermal control, retractable collet and ceramic ball bearing run on guides with increased rigidity. Both spindles are powered by reliable FANUC motors, ensuring that the necessary power is supplied for the versatile use of all the cutting tools located in the 20-position linear magazine. The arrangement of the tools in the magazine has been made in such a way as to allow simultaneous machining on the main spin ...

JANUS HTC2050 CNC lathe was built in Poland in 2010. The machine, characterised by high stability and operational reliability, uses the necessary equipment for high-speed and finishing machining, allowing for precise machining of internal holes, columns, cones, arches and all types of screw threads. The machine uses a high-speed spindle with infinitely variable rotation speed from 40 to 4000 rpm and a bed inclined by 45°, which facilitates chip removal and increases the cutting force transmitted by the horizontal bed and its head. Rear and front spindle angular contact bearings simultaneously transfer radial and axial loads, ensuring low spindle temperature rise and less thermal deformation during high-speed finishing. The JANUS lathe equipment includes a state-of-the-art FANUC Series 0i Mate-TC CNC controller, a chip conveyor and the tools shown in the photos. The total weight of th ...

STAR SB-20R type G CNC turning centre was manufactured in 2014 in Japan. The machine is distinguished from other machines of its type by its compact size and a range of features that allow it to perform virtually any type of machining on workpieces with a maximum diameter of 20 mm. The maximally durable and rigid design additionally ensures the incredible stability and rigidity of the process, required to achieve excellent turning precision and quality. Inside the large working area there are two spindles (main spindle and sub-spindle) with C-axis, which are driven by reliable high-power motors. The sub-spindle, in combination with the driven tools, allows completely independent machining after capture. The lathe also features a revolutionary guide sleeve change system, which allows the machine to switch between guide sleeve and no guide sleeve mode. The STAR SB20R type G Swiss-typ ...

STAR SV-38R CNC turning centre built in 2015 in Japan, stands out for its unparalleled flexibility and broad functionality, which makes the machine ideal for complex applications in many industries t.e. automotive or aerospace. With the help of two spindles (main spindle and sub-spindle) with C-axis, the STAR SV 38R CNC lathe performs precision machining of inclined surfaces, including front and back angle holes in up to 11 axes. Both spindles of the machine are driven by reliable, high-power motors, which is used for the versatile use of cutting tools taken from the tool holder or the 10-position turret tool head. A special system for guiding the end of the Z-axis spindle through the headstock also guarantees high rigidity and stability at the cutting point. The STAR SV38R lathe is offered with an extensive range of equipment, including an FMB turbo 5-55 / 3200 A bar feeder, workpie ...

CITIZEN CINCOM A20 VIPL CNC lathe built in 2006 ensures the highest precision and efficiency in the production process. During machining, the specially designed bed with its rigid structure and high thermal stability effectively reduces the heat impact, resulting in increased machine life and reliability. All of this, combined with a modular design with a reduced number of parts, makes the CINCOM A20 VIPL CNC lathe ideal for various types of production. Workpieces with a maximum diameter of 20 mm and a length of 135 mm are machined in 7 axes by a powerful main spindle which is synchronised with an AC motor, forming an electrospindle. A bushing driven by a separate AC motor is also synchronised with the machine’s main spindle. The operator’s panel consists of an intuitive FANUC 32i CNC controller, a memory card slot and an electronic wheel located next to the monitor designed to ch ...

KOLTECH TUU 1250 CNC above floor wheel lathe was manufactured in Poland in 2007. The wheel lathe is a special-purpose machine designed for the turning process of the running profile of wheelsets used in various types of rail vehicles. The lathe uses high-end components to guarantee efficient and precise machining of both used and new wheelsets for the railway industry. The solidly constructed structure with friction drive allows a wheelset with a maximum weight of 4 tonnes to be fed into and out of the machine from hall level. The TUU1250 machine performs the following operations: – reconditioning of the wheel profile of used wheelsets, – turning of the wheel profiles of new wheelsets, – turning of the clamping ring of the wheelset wheels, – facing of the inner and outer face surfaces of the wheels, – facing of the active surfaces of brake discs, installed on the wheels ...

TOS SN 500S/1500 universal lathe was built by the Czechoslovakian factory TOS Trenčín. The conventional lathe is used for machining rotating parts such as a shaft or disc with a maximum length of 1500 mm, in single unit or small batch production. The machine’s rigid, stable design with a high-power main motor significantly increases production efficiency and allows full utilisation of the tools. The TOS SN500-S lathe for metal performs machining on workpieces with a maximum diameter of 500 mm (turning over bed), 270 mm (turning over support) or 700 mm (turning in bridge). Workpieces machined on the machine are characterised by excellent quality and precision. The total weight of the TOS SN 500 S 1500 lathe is 1895 kg. Technical parameters of the TOS SN 500S/1500 metal lathe - maximum turning length: 1500 mm - turning diameter in the bridge: 700 mm - turning diameter above th ...

ZMM C11MB conventional lathe, manufactured in Bulgaria, is used for machining workpieces with a maximum length of 1000 mm and a diameter of 460 mm (turning above bed) or 350 mm (turning above support). The offered C-11MB x 1000 mm universal lathe of indestructible design has been equipped with a 7.5 kW main motor and a high-speed spindle to provide the user with maximum productivity and reliability for many years. Technical data of the ZMM C11MB metal lathe - maximum workpiece diameter (turning above bed): 460 mm - maximum workpiece diameter (turning over support): 350 mm - maximum workpiece length at the tusk: 1000 mm - maximum spindle speed: 2000 rpm - minimum spindle speed: 16 rpm - number of spindle speeds: 18 - spindle passage: 65 mm - motor power of ZMM C-11MB lathe: 7.5 kW

FMB TURBO 3-26/2100 bar feeder was manufactured in Germany. The compact machine is used to automatically feed bars with a maximum diameter of 26 mm into sliding headstock lathes. Operating on the two-stage feed principle, the machine features an inwardly swivelling pusher that provides significantly increased bar change efficiency Technical specifications of the bar feeder FMB TURBO 3-26/2100 - maximum bar length: 2100 mm - maximum bar diameter: 26 mm - minimum bar diameter: 3 mm

PROMA SPF-1000PH universal lathe was manufactured in 2019 in the Czech Republic. The machine is designed for precision machining of internal and external cylindrical, conical and end faces, as well as grooving, bar turning, drilling and threading with adjustable thread stroke size. The optimum rotation speed scale and high-quality cast iron construction, allows the use of high-speed steel and carbide-tipped tools. Workpieces with a maximum length of 1000 mm are machined in a fully illuminated workspace using a powerful spindle with 12 speed stages ranging between 25 and 1800 rpm. Among the extensive equipment of the conventional lathe are a SINO SDS6-3V digital readout and a 3-jaw universal chuck. The total weight of the PROMA SPF 1000PH machine is 2635 kg. Technical specifications of the PROMA SPF-1000PH lathe - maximum turning length: 1000 mm - maximum turning diameter (above t ...

COLCHESTER MASTIFF V/S 1800 universal lathe was built in Great Britain in 1998. The machine allows machining a workpiece with a maximum length of 2000 mm and a diameter of 560 mm (above the bed) or 370 mm (above the support). The 11 kW spindle of the lathe with reading rotates at 1800 rpm. The lathe is equipped with a MITSUBISHI Freqrol A200 inverter and a SONY LH52 digital display. Total weight of the machine is 3250 kg. Technical data of the lathe COLCHESTER MASTIFF V/S 1800 - turning length: 2000 mm - turning diameter above the bed: 560 mm - turning diameter over support: 370 mm - inverter: MITSUBISHI Freqrol A200 - digital display: SONY LH52 - spindle speed: 1800 rpm - spindle bore diameter: 90 mm - spindle power: 11 kW - MASTIFF VS 1800 machine dimensions: (L x W x H): 3750 x 1700 x 2100 mm - total weight: 3250 kg

MANURHIN KMX SWING 720 CNC lathe was built in 2004 in France. The automatic lathe is used for precision machining of workpieces with a maximum length of 2500 mm and a diameter of 20 mm, in ten axes. The high quality of the workmanship, high turning precision and reliability of the turning centre, will satisfy even the most demanding customers. The KMX SWING 720 swiss type lathe guarantees the possibility of performing a wide range of metal machining, thanks to the use of a main spindle together with a sub spindle rotating at a maximum speed of 10000 rpm. The machining tools are stored in a magazine with a capacity of up to 14 pieces and they are changed in a very short time. The lathe is equipped with a Fanuc Series 160i-T CNC controller for full control of the machine and a Hydrobar Express 226 LNS bar feeder. The total weight of the machine is 4300 kg. Technical parameters of  ...

Swiss type CNC Manurhin KMX TWIN 207 is a double-spindle automatic machine with automatic feeding of bars. The CNC lathe was produced in 2000 in France. Technical data : - type of automatic lathe: Swiss Type - control: NUM - Swiss control - number of axles: 6 - turning diameter up to: 20 mm - diameter of passage Ø: 28 mm - number of turns: 150-8000 rpm - feed: 10/15 m / min - number of tools: 8 + 8 + 4 + 4 pcs - spindle power: 2.2 kW - tailstock: counter spindle - machine weight: 5000 kg Lathe equipment: - two main spindles / two opposite spindles - material feed with FMB Doppel-Turbo - counter spindle: 150-6000 rpm - chip conveyor - Manurhin / Schlichting-System clamps - coolant filtration

Mazak Quick Turn Nexus 100 Year of construction: 2004 Control: Mazatrol Fusion 640T CNC lathe X-axis: 185 mm Z-axis: 360 mm Max turning diameter 280 mm Max. rotation length 305 Spindle clearance 41 mm Three-jaw chuck B208 12 tool slots 12 x Powered Tools C-axis Conveyor Parts catcher High Pressure Pump No tailstock

No. 4944: 1 gebr. Lathe Fabr. RAVENSBURG, type K 66 - 3500 ( 4500 ),Bauj. 1972 Arb.-Ber.: Sph. 1100xSpw 3500 (4350) mm, Accessories: Plate of 1500 mm Tailstock Bed extension Rollers - Support bracket Bezel Grinding support Other: Speed range 0.6 - 250 min-1 Space requirement approx. Weight approx.

Year of construction: 2011 CNC controller: F31iA5 (MAPPS 4) Capacity X-axis travel mm: 210 Y-axis travel mm: 110 Z-axis travel mm: 810 B-axis travel mm: 360º(0,001) Turning length mm: 310 Max. turning diameter mm: ø 810 Upper turret Tool holder: 16 Number of tool slots St .: 16 Speed ​​driven tools RPM: 6000 Lower turret Tool holder: 16 Number of tool slots St .: 16 Speed ​​driven tools RPM: 6000 Main spindle Speed ​​spindle rpm: 5000 Drive power spindle kW: 25/22 Spindle bore mm: 73 Chuck type: JIS A2-6 Counter spindle Speed ​​spindle rpm: 5000 Drive power spindle kW: 25/22 Spindle bore mm: 73 Chuck type: JIS A2-6 Equipment Chip conveyor Rinsing gun Bar loader Working time hours Under power: 49226 Rated power kVA: 88 Basic machine dimensions / weight Length mm: 3930 Width mm: 274 ...