tornos usadas para venda

Tip height: 250 mm Center width: 1500 mm Circulation Ø: over bed 500 mm Spindle bore: 63 mm Spindle holder: Size 8 Mounting cone tailstock: 5 MK Spindle speeds: 170 - 2240 rpm Feeds: longitudinal/flat 0.014-1/0.0063-0.45 mm/U Thread pitches: 0.1 - 112 mm electrical connection: 380 V, 7.5 kW Space requirement: 2300 x 1000 x 1400 mm Weight: 2360 kg

Main characteristics: faceplate diameter - 2800 mm, The diameter of the installed product is 3200 mm, Workpiece weight - 16000 kg., The height of the installed product above the faceplate - 1600 mm, Machine weight - 43,000 kg. ... mais informação

Tip height 255 mm Turning diameter on the bed 500 mm Turning diameter on the slide 310 mm Turnable diameter in the recess 720 mm Distance between centers 1500 mm Bench width 400 mm Spindle hole diameter 62 mm Tailstock quill diameter 80 mm - speed range 20-2000 rpm N. BEZELS 3 ... mais informação

Technical data: Completely overhauled in 2001 Circulation diameter over bed: 1000 mm Diameter in recess: 1120 mm Circulation diameter over bed slide: 690 mm max. height above floor: 1110 mm max. height above bed: 460 mm Bed width: 800 mm Width of recess in front of the plan disc: 550 mm

faceplate diameter: 1400 mmswing diameter: 1600 mmturning height: 1500 mmControl: Siemens type: 840 D Tool changer: workpiece weight: 6500 kgSlide movement vertical: 1000 mmturning speeds: 10-315 U/minFeed: 3600 mm/mintotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore for usnot binding. We reserve the right to prior sale, it applyonly our businessand conditions of sale.About Usmore than 400 own machines in stockover 12000 m² storage area, crane capacity 70 tmore than 10000 articles accessories for your workshopYou want to sell machines, production lines or your company,Then contact us.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 620 mmhollow: max. 400 mmweight of the machine ca.: 200 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

turning diameter over bed: 500 mmturning diameter over slide rest: 250 mmturning length: 1200 mmturning diameter in the gap: mmturning speeds: 7,1 - 1400 U/mincentre height: 250 mmspindle bore: 49 mmtotal power requirement: 7,5 kWweight of the machine ca.: 3,9 tdimensions of the machine ca.: 2,85 x 1,3 x 1,6 mLead and feed spindle lathe- 3-jaw chuck 260mm- 4-fold steel holder- Coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A TADU lathe is available, which has been retrofitted with CNC technology by Konrad Seidler. Speed: max. 200 rpm, turning diameter: 1750 mm (interference circle diameter), control: Siemens 840D, space requirement X/Y/: 5000mm/5000mm. Including a turret with 8 tool holders. ... mais informação

Code 0782 Description Centerlathe Make A.I. Hembrug Model DR - 133 Serial No. DR 133 / F 4018 Year 1970 Distance between centers 750 mm Swing over bed 270 mm Swing over gap xxx mm Swing over crossslide 150 mm Spindle bore 35 mm Number of spindle speeds 28 Spindle speeds 18 – 3550 rpm Feeds Longitude and cross Motor power 3 kW – 380 Volts Thread cutting Metric, W.W., Modul and D.P. Accessoiries 3 chuck 2 x RSF DRO Condition Machine is in normal condition.

Max diameter of the product processed over: bed, mm 2 500 support, mm 2,000 Smallest diameter of the workpiece, mm 500 Distance between centers, mm 12,500 Max weight of the processed product, kg 100,000 Spindle speed, rpm 0.8-50 Threading: metric (step), mm 2-96 inch (threads per 1") 20-3/8 Angle of rotation of the upper part of the caliper, 90˚ Speed of accelerated extension of the quill, mm/min 310 Accelerated movement of the tailstock, m/min. 2.9 Accelerated movement of the caliper, m/min 3.1 Longitudinal feed of the caliper, mm/rev 0.159-49.6 Ratio of longitudinal to transverse feed 2.5 Main drive electric motor power, kW 125 Machine dimensions, mm: length 20 900 width 4 350 height 3 280 Machine weight, kg 162,500

turning diameter over bed: 2100 mmturning diameter over slide rest: 1400 mmturning length: 10000 mmcentre distance: 11300 mmfaceplate: 1300 mmworkpiece weight: 40 tsteady: 4 Rest: 2 bed width: 2350 mmdiameter of main spindle in front bearing: 560 mmtailstock quill diameter: 480 mmtotal power requirement: 150 kWweight of the machine ca.: 118 tdimensions of the machine ca.: 20x4x3 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1100 mmturning diameter over slide rest: 710 mmturning length: 6000 mmTorque: 35000 NmHeight of centres: 550 mmsteady: 100-440 mmsteady: 280-550 mmsteady: 80-300 mmchip conveyor: workpiece weight: 10000 kgworkpiece weight in steadies max.: 15000 kgtotal power requirement: 55 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

LATHE MORANDO Manufacturer: ITALY Year of manufacture: 1970 Swing over bed 1200mm Turning length: 8 000mm  ... mais informação

turning diameter over bed: 440 mmturning diameter over slide rest: 240 mmturning length: 2000 mmspindle turning speed range: 5,6 - 1120 U/minnumber of feeds: 40 spindle bore: 56 mmlongitudinal feeds:: 0,056 - 12,8 mm/Uface feeds: 0,028 - 6,4 thread - mm pitch: 0,5 - 112 mmthread - module: 0,125 - 28 mmthread - inch: 1 -56 Gang / inch.total power requirement: 7,5 kWweight of the machine ca.: 3 tdimensions of the machine ca.: 3,5 x 1,2 x 1,5 m• fixed steady• cooling device• thread cutting automatic - GSAThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gildemeister Multispindle Slot machine 6- Spindler Type: AS 25-6 Pick-up device back-valued processing pneumatic stop Balluff cam switch IEMCA PRA Bar loader Oil mist separator (electrostat.) Conveyor Machine has been retrofitted in the past  ... mais informação

Gildemeister 6 Spindle Lathe AS 32-6 - Spindle stop set-up - Pneum pick-up device. - Zubehoer at an extra cost - Cross hole drilling - Thread cutting gears - Thread cutting device - wahlw. Fraeseinrichtung Querschl. - Spaenefoerderer  ... mais informação

Old Soviet lathe. Turning speed: 56/2800. Still in working order, but nothing has been produced with it for a long time. ... mais informação

turning diameter over bed: 480 mmturning diameter over slide rest: . mmturning length: ca. 1000 mm3-jaw chuck: Röhm Ø 250 mmcentre height: 240 mmturning speeds: max. 2240 U/minspindle bore: 65 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mFeed protectionWork lightMultifix steel holder size. b1 removable cassetteIncludes three-jaw chuck with soft jawsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1000 mmswing diameter: 1400 mmturning height: 1000 mmturning speeds: 4-16-20-80-315 U/mintotal power requirement: 55 kWMachine no.: 379066With copy facilityBase, faceplate and main driveFaceplate diameter: 1000mmDistance from the floor to the top edge of the faceplate: 900mmPermissible faceplate load: 8000kgstands and crossbeamsVertical adjustment of the crossbar: 800mmAdjustment of the transom per minute: 450mmcrossbar supportLargest outside diameter: 1150mmLargest turning height: 1150mmLargest turning height with a workpiece diameter of up to 800m: 1750mmLargest distance between faceplate and square turret head: 1375mmLargest vertical adjustment of the turret slide: 700mmDimension of square turret head: 400x400mmSmallest immersion diameter for the turret head: 580mmfeed boxNumber of feeds: 24Increment: 1.25The data for this ad was created with ModulMWS - the softwar ...

turning diameter over bed: 280 mmturning diameter over slide rest: 155 mmturning diameter in the gap: 350 mmturning length: 800 mmturning speeds: 26 - 2000 U/minspindle bore: 24 mmconnected load: 1,6 kWweight of the machine ca.: 0,7 tdimensions: 1,55 x 0,8 x 1,3 mCenter lathe with- digital display- 4-jaw chuck Röhm 250mm- Multifix steel holder- follow along. Bezel- steady rest max. 135mm- Chip protection wall- Chip tray- coolant system- machine lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.