fresadoras usadas para venda

x-travel:2600 mmy-travel:1000 mmz-travel:950 (opt.1500) mmT-slot (width-distance-quantity):22H8x7 Stk. mmTable area:2700×1050 mmmax. table load:5000 kgspindle taper:50 SKspindle speeds:3500 (5000 opt.) 1/min.spindle motor:15/18,5 (22/26 opt) kWfeed:1~5000 mm/minrapid speed:10 m/minpositioning accuracy:JIS 6338;±0,005mm / 300mm VDI 3441:P0,014mm repeating accuracy:JIS 6338:±0,003mm VDI3441:PS0,01 mm total power requirement:35 KVAweight of the machine ca.:15 tuniversal milling head:manuell LINEAR SCALES IN X-Y-Z AXES:von HEIDENHAIN; mit Ausblasvorrichtung von chip conveyor:Schneckenausführung vorne/hinten cnc control:Siemens/Fanuc/Heidenhain TRADE TERM : F.O.B. TAIWAN PORT SHIPMENT : WITHIN 14 DAYS AFTER RECEIPT OF YOUR DOWN PAYMENTPAYMENT : 30% DOWN PAYMENT BY SWIFT TRANSFER,70% BY IRREVOCABLE & SIGHT L/C IN OUR FAVORPACKING : BY SEAWORTHY PACKAGEWARRANTY: 12 MONTHSVALIDITY : 60 DA ...

x-travel:3000 mmy-travel:1000 mmz-travel:950 (opt.1500) mmT-slot (width-distance-quantity):22H8x7 Stk. mmTable area:3100x1050 mmmax. table load:8000 kgspindle taper:50 SKspindle speeds:3500 (5000 opt.) 1/min.spindle motor:15/18,5 (22/26 opt) kWfeed:1~5000 mm/minrapid speed:10 m/minpositioning accuracy:JIS 6338;±0,005mm / 300mm VDI 3441:P0,014mm repeating accuracy:JIS 6338:±0,003mm VDI3441:PS0,01 mm total power requirement:35 KVAweight of the machine ca.:13,5 tuniversal milling head:manuell LINEAR SCALES IN X-Y-Z AXES:von HEIDENHAIN; mit Ausblasvorrichtung von chip conveyor:Schneckenausführung vorne/hinten cnc control:Siemens/Fanuc/Heidenhain TRADE TERM : F.O.B. TAIWAN PORT SHIPMENT : WITHIN 14 DAYS AFTER RECEIPT OF YOUR DOWN PAYMENTPAYMENT : 30% DOWN PAYMENT BY SWIFT TRANSFER,70% BY IRREVOCABLE & SIGHT L/C IN OUR FAVORPACKING : BY SEAWORTHY PACKAGEWARRANTY: 12 MONTHSVALIDITY : 60 D ...

x-travel:4000 mmy-travel:1000 mmz-travel:950 (opt.1500) mmT-slot (width-distance-quantity):22H8x7 Stk. mmTable area:4000x1050 mmmax. table load:9000 kgspindle taper:50 SKspindle speeds:3500 (5000 opt.) 1/min.spindle motor:15/18,5 (22/26 opt) kWfeed:1~5000 mm/minrapid speed:10 m/minpositioning accuracy:JIS 6338;±0,005mm / 300mm VDI 3441:P0,014mm repeating accuracy:JIS 6338:±0,003mm VDI3441:PS0,01 mm total power requirement:40 KVAweight of the machine ca.:23,6 tuniversal milling head:manuell LINEAR SCALES IN X-Y-Z AXES:von HEIDENHAIN; mit Ausblasvorrichtung von chip conveyor:Schneckenausführung vorne/hinten cnc control:Siemens/Fanuc/Heidenhain TRADE TERM : F.O.B. TAIWAN PORT SHIPMENT : WITHIN 14 DAYS AFTER RECEIPT OF YOUR DOWN PAYMENTPAYMENT : 30% DOWN PAYMENT BY SWIFT TRANSFER,70% BY IRREVOCABLE & SIGHT L/C IN OUR FAVORPACKING : BY SEAWORTHY PACKAGEWARRANTY: 12 MONTHSVALIDITY : 60 D ...

x-travel:2300 mmy-travel:1200 mmz-travel:950 mmfeed::max. 4000 mm/minspindle turning speed range:31,5 - 1.600 1/minspindle taper:SK 50 spindle drive:30 kWmilling head -swivable +/-:45 °distance spindle /table:max. 1200 mmtable surface area:3000 (4200) x 1200 mmtable load capacity:10000 kgControl:TNC 426 HEIDENHAIN weight of the machine ca.:38 tCNC milling machine,from 2008 with HEIDENHAIN TNC 426 control,in 2022 overhauled,2 pcs. workbenches2 pcs. tool cabinetlot of tools (around 140 pcs.),el. handwheelapprox. 69.000h "machine on, 18.500h "spindle on"very good condition, under power in factory

x-travel:1000 mmy-travel:320 mmz-travel:400 mmTable dimensions:1000 x 400 mm ... mais informação

x-travel:800 mmy-travel:800 mmz-travel:550 mmrotary table::800 x 630 mmmax. table load:850 kgspindle turning speed range:10.000 1/mincontrol:HEIDENHAIN iTNC 530 HSCI feed speeds infinitely variable:1 - 30.000 mm/minrapid traverse:45/45/40 m/minTool changer:42- fach spindle taper ISO:SK 40 weight of the machine ca.:13 ttotal power requirement:45 kVAdimensions of the machine ca.:5 x 2,45 x 2,9 m5-axis simultaneously universal-machining centerNC-rorary-swivelling table (A-axis +- 130° / C-axis 360°),rpm rotary-swivelling table (A-axis 15 1/min, C-axis 25 1/min),infrared touchprobe HEIDENHAIN,flushgun,prepared for oilmist suction,el. handwheel,automatic cabin roof,el. thermal compensation,KinematikOpt,safety glass,internal and external air blast,internal coolant supply 40 bar,chip conveyor,approx. 30.000h "machine on", approx. 10.000h "spindle on"

adjustment drive of the grinding spind.slide:0,0025 - 0,05 mmtotal power requirement:100 kWadjustment of grinding head slide:150 mmweight of the machine ca.:17 tgrinding spindle drive:2 x 37 kWgrinding width:30-150 mmperipheral speed:34 m/secworkpiece speeds:60 - 300 mm/Sek.grinding height:70 mmgrinding wheel diameter:750 mmgrinding tools:750 x 75 x 350 mmgrinding wheel turning speeds:870 U/Min.max. workpiece diameter:250 mm

x-travel:1200 mmy-travel:800 mmz-travel:550 mmdistance spindle center to table:150-700 mmdistance between columns:920 mmtable-size:1320x800 mmtable load:2000 kgT-slot (width-distance-quantity):14x120x7 mmspindle taper:HSK-A 63/HSK-E 50 spindle speed:15000 (opt. 24000/36000) U/minspindle drive:7.5/11 (opt. 30/39; 20/26 kWSpindle motor torque:47.7/70 (opt. 29.1/37.8; 10.4/13.5) N.m.rapid traverse in x-y-z axis:30000 (opt. 40000) mm/minCutting feed rate X/Y/Z axis:1~10000 (opt.1~20000) mm/minTool changer:20 (opt. 24) max. tool diameter:100/130 (opt. 80/130) mmmax. tool length:300 (opt. 220) mmmax. tool weight:8 (opt. 4) kgtotal power requirement:30 (opt. 80) kvaWeight approx.:12 tMachine size (LxWxH):5026x4276x3210 mmpositioning accuracy:0,014 mmrepeating accuracy:0,008 mmCNC controller:Siemens/Fanuc/Mitsubishi/Heidenhain automatic tool changer:20/24 linear scales:Heidenhain/Fagor tool mea ...

x-travel:1600 mmy-travel:1300 mmz-travel:700 mmdistance spindle center to table:200-900 (opt. 225-925/250-950) mmdistance between columns:1500 mmtable-size:1800 x 1300 mmtable load:4000 kgT-slot (width-distance-quantity):22x160x8 mmspindle taper:HSK-A 63/HSK-E 50 spindle speed:15000 (opt. 24000/36000) U/minspindle drive:15/18,5 (opt. 25/33 od. 20/26) kWSpindle motor torque:95/118 (opt. 72.6/95.8; 10,4/13,5 N.m.rapid traverse in x-y-z axis:30000 (opt. 40000) mm/minCutting feed rate X/Y/Z axis:1~20000 mm/minTool changer:20 (opt. 24) max. tool diameter:100/130 (opt. 80/130) mmmax. tool length:300 (opt. 220) mmmax. tool weight:8 (opt. 4) kgtotal power requirement:60 (opt. 80) kvaWeight approx.:22 tMachine size (LxWxH):5026x4276x3210 mmpositioning accuracy:0,014 mmrepeating accuracy:0,008 mmCNC controller:Siemens/Fanuc/Mitsubishi/Heidenhain automatic tool changer:20/24 chip conveyor with ch ...

For the environmentally friendly removal of paint and varnish from smooth wooden surfaces such as stairs, doors and windows. Suitable for working with untreated wood. Due to lateral blades, it is suitable for processing rebates. Infinitely variable adjustment of the milling depth. Die-cast aluminium gear housing for optimal heat dissipation and long service life. Reversible HM chisels usable on four sides for a long tool life. Extraction option by connecting an all-purpose vacuum cleaner. • Milling cutter diameter 80mm • Axial milling depth 0-0.3mm • Radial milling depth 0.15mm

Including ISO holder with plate, now with Mas Bt50, 40 tools, hydro unit with cooler, high pressure and low pressure water with new exchanger arm, bearings replaced 2.5 years ago, including discharge belt, worm gears removal residual material up to 6000 rpm. Lot must be professionally dismantled. Lot is connected to water/electricity/gas, pipe and/or cabling must be capped. Damage and/or negligence to the property will be recovered from the buyer. We advise you to bring your own materials. No tap available. Viewing day for this lot is by appointment. Please send an email to: info@petervanderleegte.nl

Weight approx. 650kg ... mais informação

x-axis:16000 mmy-axis:1250 mmz-axis:3200 mmtotal power requirement:37 kWspeeds:2000 U/minSoraluce milling machine FR 16000Angle head pivotable: 2.5°Drive power: 37 KW The machine was completely overhauled in 2009: new cables, new controls. Can be viewed under power at any time - without machine table, without rotary table, without chip conveyor-- is in good condition (inspection under power is possible)

 ... mais informação

 ... mais informação

This Röders RFM 600/2 Vertical Machining center was manufactured in the year 2002 in Germany. It is equipped with a Roders Tec RMS6 control unit and has 3 axis. The machine has a spindle speed of 42000 rpm. ... mais informação

 ... mais informação

x-travel:18000 mmy-travel:2500 mmz-travel:1250 mmspindle motor:31 kWspindle turning speed range:10 - 10000 U/minspindle taper::HSK A 80 number of tools:104 :A-Achse +100/-90c-axis:+/- 200 °feeds:1 - 16000 mm/minrapid traverse::16 m/minweight of the machine ca.:66 ttotal power requirement:65 kWdimensions of the machine ca.:25,5 x 10,0 x 5,2 mMachine equiped with SIEMENS 840 D control for 5 axis- NC 2-axis fork type milling head- BALLUF tool identification system- MARPOSS measuring device- tool changer for 104 tools- hand operating panel, exhauster

This 3-Axis vertical machining center, manufactured in 2000, showcases a robust build and advanced machining capabilities. Sporting a spindle speed of up to 25,000 rpm and movements of 1020mm x 510mm x 460mm in the X, Y, and Z axes respectively, it accommodates large workpieces up to 800 kg. Its configured with the high-precision Mazak Mazatrol 640M PC Fusion-CNC control system. The MAZAK FJV-250 we have for sale is ready to deliver high performance. Contact us for more information about this vertical machining center.

This RÖDERS 600 RFM-2 Vertical Machining center was manufactured in the year 2004 in Germany. ... mais informação