serras usadas para venda

capacity 90 degrees: round: 250 mmcapacity 90 degrees: square: 210 mm: 290 x 210 mmsaw band length: 2.965 x 27 x 0,9 mm mmtable height: 940 mmband speed: 35 / 70 m/mintotal power requirement: 1,1/1,3 kWweight of the machine ca.: 0,35 tdimensions of the machine ca.: 1,3 x 0,8 x 1,5 mLeasing returns, little work done.Double miter metal band saw hydraulic semi-automatic with: - Hydraulic vice - Material height finder - Cutting monitoring by ammeter - Cutting pressure feed regulator - Miter cuts up to 60° left and 45° right - Quick-action clamping stick can be moved - Quick release lever - Automatic coolingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Year 2007 - Double column - Cutting capacities: Round Ø 320 mm Square 320x320 mm - Smallest sawable section ø 10 mm - Minimum single-cut fall 6 mm - Min. cut-off height 15 mm - Programmable automatic feeder, stroke 750 mm, multiple up to 20000 mm. - Load capacity 1000 kg - Variable cutting speed from 20 to 110 mm/mn - Continuously variable cutting pressure - Continuously adjustable material clamping pressure from 20 to 60 bar. - Interchangeable carbide guide - Mechanical blade tension - Cooling system 3 nozzles, flow rate 40L/mn - Lighting system - Full documentation - Very good condition

cutting diameter: 335 mmdimensions of saw-band: 4400x34x1,1 mmtable height: 750 mmmin. dia.: 5 mmcapacity 90 degrees: round: 335 mmcapacity 90 degrees: flat: 500x335 mmcutting speed: 15-150 m/minclamping range bunching voltage: 0-500 / 15-335 Breite / Höhe: 0-600 / 0-6000 Einf. / Mehrf.weight of the machine ca.: 1600 kgdimensions of the machine ca.: 2230x2350x1900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 260 mmsaw band length: . mmcutting width: . mmweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

Plate Saw for Iron Plates Saw blade dia. 350mm, stroke: approx. 500mm, mitre and swivel possible To be visited under electricity  ... mais informação

cutting diameter: 260 mmsaw band length: 2910 mmcutting width: 0,9 mmcapacity 45 degrees: round: 200 mmcapacity 90 degrees: square: 260 x 260 mmcapacity 90 degrees: flat: 300 x 260 mmcapacity 60 degrees: round: 165 mmcapacity 60 degrees: square: 150 x 150 mmcapacity 60 degrees: flat: 160 x 120 mmcutting speed: 35 / 70 m/mindimensions of saw-band: 2910 x 27 x 0,9 mmheight of material-table: 950 mmtotal power requirement: 2,0 kWweight of the machine ca.: 400 kgdimensions of machine L x W x H: 1,70 x 0,90 x 1,67 Accessories: coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Circular sawing machine. unfortunately no technical data.  ... mais informação

automatic feeding, chip conveyor, L-310, W-210, H- 180cm  ... mais informação

Description: Discharge roller conveyor Length each 2000 mm Roller width 240 mm Incl. KRÄMER extractionApprox. Onsite Dimension. (l x w x h): 750 x 700 x 1,200 mm, weight approx.: 250 kg ... mais informação

Machine Type: Metal Circular Sawing Machine Manufacturer: WEIDMANN Model: EW 20 Condition: good Offer Type: Used Machine Specifications: Cutting area: Ø 70 mm Blade diameter: 225 mm Drive type: el./mech. Drive: 400 V 0.37 / 0.5 kW Remark: material stop, 2 spare sheets, 2 speeds Weight: 50 kg The machine is in good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

Note: General overhaul of the machine in 2020 ... mais informação

cutting diameter: 250 mmcapacity 90 degrees: flat: 280 x 220 mmcapacity 90 degrees: square: 220 x 220 mmvice: 285 mmturning speed range:: 36/72 m/mindimensions of saw-band: 2950x27x0,9 mmtotal power requirement: 1,5 / 1,8 kWweight of the machine ca.: 485 kgdimensions of the machine ca.: 1700 x 1000 x 1800 mmElectro-hydraulic semi-automatic band saw SHARK 282 SXI EVOThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 240 mmcapacity 90 degrees: square: 240 mm: 165 x 310 mmsaw band length: 2.725 x 27 x 0,9 mm mmtable height: 940 mmband speed: 35 / 70 m/mintotal power requirement: 1,1 kWweight of the machine ca.: 0,4 tThe Z252/DG has the following equipment:- Hydraulic semi-automatic,- Double miter 60° left/45° right- emulsion pump,- base,- saw blade,- 400V plug -16A-The machine is delivered fully assembled and ready for immediate use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 22606 Specifications: - Saw blade dimensions 2765 x 27 x 0.9 mm - 2 cutting speeds 35 - 70 m/min - Cutting pressure regulation - Hydr.- Pneum. Raising + lowering the saw frame - Machine table swivels for mitre cuts - Cutting area - at 90° approx. 255 mm - flat 300 x 180 mm - at 45° Li approx. 210 mm - flat 210 x 160 mm - at 45°Re approx. 180 mm - at 60°Li around 135 mm - max. opening width of vice 365 mm - Drive 400 V / 1.3 / 1.7 kW - Space requirement approx. W 900 x H 1800 x D 1700 mm - Weight approx. 350 kg

Cutting range at 90° round: 250 mm Cutting range at 90° flat: 260 x 100 mm Saw blade dimensions: length 400 mm Lifting speeds: 6 electr. Power supply: 380 V, 1.4/1.6 kW Dimensions: 1470 x 700 x 1720 mm Weight: 610 kg  ... mais informação

Description: Cutting area round material 260 mm , Cutting area square material 260 x 260 mmweight approx.: 1,500 kg, Approx. Onsite Dimension. (l x w x h): 6,800 x 2,300 x 1,550 mm ... mais informação

From a company liquidation Specifications: Eisele VMS 300 Saw blade diameter 300mm Mitre cuts up to 60° right---left 30° possible Right stop + roller block Cutting Areas 90° 120x75mm---45° 80x75mm Round 90mm Saw blade speeds 40/80 m/min Coolant pump Rbeld 380 volts  ... mais informação

Specifications: Saw blade diameter or dimension 360mm Bore 50mm Mitre cuts up to 45° possible Stop with scale right 2500mm Cutting Areas 90° double T and U-profile 200 x 90 mm 45° double-T and U-profile 140 x 90 mm 90° round steel 120 mm 45° round steel 100 mm 90° square steel 110 mm Bz0turliee 45° square steel 95 mm 90° flat bar 200 x 90 mm 45° flat bar 120 x 90 mm pole-switchable motor --additional speeds by belt reversal Saw blade speeds 17/32-20/40-25/50 m/min Year of construction estimated--no nameplate available--

saw blade diameter: Ø 400 mmcutting diameter: 130 mmcapacity 90 degrees: square: 120 x 120 mmcapacity 90 degrees: flat: 315 x 40 mmstroke: 150 mmcutting speed: 10 - 30 m/mintotal power requirement: 1.8 / 2.7 kWweight of the machine ca.: 850 kgrange L-W-H: 1200 x 1000 x 1700 mmFurnishing:- robust cold circular saw with powerful drive- electro-hydraulic metal circular saw - underfloor Underfloor = saw blade delivery from below- electro-hydraulic material hold-down device manual fine feed- Miter adjustment on both sides via large turntable including analogue degree display- continuous feed adjustment of the saw blade- all gears are hardened and ground- entire gearbox runs in an oil bath- all bearing points have rolling bearings- pole-changing motor- Proven guidance of the saw blade in a strong pivot bearing- Discharge roller conveyor including fastening- User manual (PDF) Machine link:- ht ...

Description: Machine number 0746 , Table dimensions approx. 440 x 200 mm ,saw blade diameter: 300 mm, weight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,000 x 1,800 mm, turning speed range: 2000 / 4000 rpm ... mais informação