- 3M-MATIC (1)
- AAT (1)
- ABB (23)
- ABB ROBOTICS (1)
- ABL (1)
- ABS INAUEN (1)
- Abus (9)
- ACE (1)
- ACHENBACH (1)
- ACMA GD (1)
- ACMI (2)
- ADICEN ALCATEL PASCAL (1)
- ADK (1)
- ADL (2)
- AEG (13)
- AEG ELOTHERM (1)
- AEL GMBH LEISNIG (1)
- AERO (1)
- AEROTECHNIK (1)
- Aerzen (2)
- Aerzener (4)
- Afriso (2)
- AGIE (3)
- AGIETRON (1)
- AGRAMKOW (1)
- AICHELIN (1)
- AIRATOR (1)
- AIRPOWER EUROPE (1)
- AIRTEC (1)
- AIRWELL (1)
- AL-KO (3)
- ALBERT STAHL (1)
- ALBIAN (1)
- ALCA IMPIANTI (1)
- ALCATEL (1)
- Alcatel Adixen (2)
- ALCATEL ADIXEN PASCAL (1)
- ALCOA (1)
- ALCOS (1)
- ALEXANDERWERK (1)
- ALFA (1)
- Alfa Laval (12)
- ALFAMACCHINE (1)
- ALFATEK (3)
- ALKETT (1)
- ALLWEILER (2)
- ALPHASTAUB (1)
- Alpine (2)
- ALPMA (1)
- Alsthom (2)
- ALTA (1)
- ALTENBERG ? (1)
- ALUP (2)
- ALURO (1)
- AMETEK LLOYD (1)
- AMG / PESCH (1)
- AMOB (1)
- AMS FERRARI (1)
- Angelantoni (2)
- ANSCHLAGWINKEL (1)
- APD VAKUUMPUMP #2912 (1)
- APE (13)
- ARIETE (1)
- ARJO HOSPITAL EQUIPMENT (1)
- ARKU (1)
- ARO (1)
- AROL (10)
- AROS HYDRAULIK GMBH (1)
- ASHE (1)
- ASHTON (1)
- ASTED-MICROVERK APS (1)
- ATB BAUKNECHT (1)
- ATLANTA (1)
- Atlas Copco (21)
- ATLAS-COPCO (1)
- ATMSOLUTIONS (1)
- AUDI, VW,BMW.FORD, (1)
- AUFSPANNPLATTE (1)
- AUFSPANNTISCH MIT T-NUTEN (1)
- Aufspannwinkel (3)
- AUFSPANNWINKEL AUS STAHL (1)
- AURA MARINE (1)
- AUTOMAT (2)
- AUTOOL (1)
- AVE (6)
- AXIS (1)
- AXTRA (3)
- AZO (1)
- B+M (1)
- BAIONI (1)
- BAJLER ZEMBROD (1)
- Balkancar (12)
- Balzers (2)
- Bar Gar (2)
- Baretta (2)
- BARTEC #3872 (1)
- BAUMER (3)
- Bavelloni (2)
- BC (4)
- BDK (1)
- ... mais
Fabricante:
(Categoria: 1300)
Ano de construção: 2003
usava
horizontal contour cutting machine, second-handmanufacturer: Günter EiseltModel: KONTUREX Standardyear of construction: 2003cutting width: 1250 mmcutting length: 3000 mmCutting height: 1300 mmWire length: 7400 mmTable size 3000 x 1250 mmhorizontal contour cutting machine, including vacuum table and suction unit;torsion-resistant steel frame construction, mobile table unit.All data without guarantee (excerpt from catalogue text)Price: 1.500 EURO, net. Pricing in EURO.This is a used machine. All prices are understood net prices without, packing, loading, shipping or any dutys.Delivery condition: Ex fundament at location of working in Germany,non-binding time of delivery: at short notice, after payment for 100%Payment condition: 80% advanced for contract placing; 20% before loadingoffer validity: Subject to sale and mistakesPlease, contact us for getting more information and picture ...
Ano de construção: 2022
usava
Measuring area: 70-300xH 50-H 200mm, max. workpiece weight: 50kg, with Foundation VL-550, dongle and licensed software, without computer, the device was hardly used. ... mais informação
Ano de construção: 2014
usava
Operational hours counter CNC/ spindle: 14,061/ 3504h, the spindle was overhauled in 2021. ... mais informação
usava
With High-Voltage Generator Tantec HV2002, connected load: 1100W. ... mais informação
Ano de construção: 1973
usava
Max. test load range: 750kg, with documentation and accessories. ... mais informação
Ano de construção: 2007
usava
With documentation and software. ... mais informação
Ano de construção: 1998
usava
Load: 6kg, weight: 112kg, with Controls Stäubli CS7 RX90, weight: 345kg, including documentation and pneumatic dual gripper. ... mais informação
Ano de construção: 2000
usava
With window station, printing units, outside and inside print, gumming reel splicer, hotmelt and window splicer, ... mais informação
Ano de construção: 2007
usava
X-travel: 500mm, y-travel: 450mm, z-travel: 230mm, max. rotational speed: 30,000/min, controls: TVB E-Control, weight: 3.5t, without zero-point clamping system, defects are not known, on-site inspection is possible. ... mais informação
Ano de construção: 2022
usava
Working width: 1400mm, roll width: 1420mm, speed: 250m/min, heating output: 37kW, compressed air supply: 6bar, controls: MTX 03, operational hours counter: ca. 50h, with documentation. ... mais informação
Ano de construção: 1988
usava
power capacity:2x 5,5 kWfeed pressure:16 barliter capacity:2 x 585 l /minReceiver capacity:750 ltotal power requirement:380 V,50 Hz,11,2A, 2x5,5 kWweight of the machine ca.:940 kgdimensions of the machine ca.:3000 x 900 x 1650 mm ... mais informação
Ano de construção: 2005
usava
There are 40 identical halogen floodlights available, output: 400W. ... mais informação
usava
Power consumption: 20kWh, compressed air supply: 6bar, connected load: 22kVA, with documentation. ... mais informação
Ano de construção: 2017
usava
Includes measuring field S-075, calibration plate S, strip projection system LED (blue), 128 LP, lenses, 2x high-resolution 8. 0 MPixel digital camera with GigE interface, 3296x2472 pixels, lenses, filters, optoLINKII controller with USB interface, 10m cable, upgrade to integrated rack computer Intel® Xeon® processor, 64bit, 32GB RAM, 1TB SATA HDD, DVD +/-rw, graphics card, OPTOCAT measurement and evaluation software for Windows, laser pointer, flight case, closed system housing, M rotary/swivel unit with three-jaw chuck, certification for optical measurement system and system acceptance according to VDI / VDE 2634, the machine was hardly used.
Ano de construção: 2005
usava
feed pressure:8 bar:Verd. 5050 min /1voltage:400 Vrated current:90 Atotal power requirement:46,5 kWweight of the machine ca.:1320 tdimensions of the machine ca.:1800 x 1600 x 2300 mmfrequency:50 HzEffizienz::7,4 m3/minIP::54 / 20 ... mais informação
usava
Ano de construção: 1993
usava
power capacity:110 kWfeed pressure:10 barNumber of working hours:11 372 / Lastst. 7436 hvolume capacity:16,75 m³/mintotal power requirement:110 kWweight of the machine ca.:2,3 tdimensions of the machine ca.:2400 x 1630 x1820 mm ... mais informação
Ano de construção: 2000
usava
Only for production, without injection moulding system. ... mais informação
Ano de construção: 2004
usava
Ano de construção: 2013
usava
Connected load: 500VA, without documentation or accessories, was hardly used. ... mais informação