Fabricante:
(Categoria: 1300)
Two identical Keyence measuring devices are available. Image sensor: 1inch 6.6 megapixel CMOS, lens: Double telecentric lens. Wide field diameter/length: 100mm/200mm, High precision diameter/length: 25mm/125mm. Repeatability: Without stage movement: +/-1µm(wide field), +/-0.5µm(high precision), with stage movement: +/-2µm(wide field), +/-1.5µm(high precision). Measuring accuracy (+/-2 sigma): Without binding: +/-5µm(wide field), +/-2µm(high precision), with binding: +/- (7+0.02L)µm(wide field), +/-(4 +0.02L)µm(high precision).
Working area: 200x200mm, spot diameter: 0.16mm, max. speed: 3000mm/s, material: Acrylic, crystal, glass, leather, MDF, paper, plastic, plexiglas, wood, laser power: 30W, control unit CPU: PU Pentium 266MMX 32MB RAM, control unit dimensions: 650x800x1450mm, length: 1750mm, width: 900mm, height: 1400mm, weight: 335kg, including custom made coveyor.
There are 7 lift stacker (low and high lift) with chargers and batteries available. Riders: 3x Linde D14AP double-decker, operating hours: (2876h, 3354h, 3005h). 1x Linde L14LAP, operating hours: 823h. Carrier: 1x Linde D14AP double-decker, operating hours: 2500h. 1x Linde T20 (low pusher truck), operating hours: 2192h. 1x Stöcklin stainless steel pusher, operating hours: 3500h. 2x batteries for the D14 AP, 1x battery for the L14LAP driver, 6x chargers. Available from July, 2024.
There are two identical machines available, capacity: 70l, max. operational temperature: 100°C, operational pressure: -1 to 1bar, with agitator. ... mais informação
A horizontal, continuous, electric tempering furnace complete with pre-stressing cooler and post-cooling section is available. Total oven length: 19.44m, useful load width: 1250mm, length of tempering station: 15.12m, length of post-cooling station: 4m. Length of loading table: 4m, length of unloading table: 4m, total length of tempering system: 47.19m, including robot: 52m, total width without sound insulation: approx. 6.00m. Glass thickness range: 2.8mm to 10mm, max. glass size: 1250mm/2200mm, min. glass size: 100mm/250mm. Documentation available.
With documentation, an inspection is possible. ... mais informação
Working width: 1500mm, max. master roll diameter: 450mm, max. master roll weight: 400kg, max. end roll diameter: 450mm, max. end roll weight: 90kg/shaft, min. slitting width: 10mm, winding speed: 100m/min. ... mais informação
Printing speed: 30-40m/min, number of color units: 6, max. working width: 230mm, including documentation, rubber rollers, impression cylinders, gear wheels, various spare parts and accessories, an inspection is possible. ... mais informação
Working width: 1600mm, max. thickness for knife cut/circular cut: 20mm/10mm, number of blades: 4. ... mais informação
Max. cuttable matboard thickness: 3.5mm, cutting radius: 5mm, connected load: 2500VA, with documentation. ... mais informação
There are 5 identical heavy wire bonders Hesse available. Max. bond head: 500µm, max. bond force wire/ribbon & Cu: 2500cN/5000cN, cutting methods: Active/Air/Passive, working range X/Y: 350mm/560mm, max. power: 3 wires/s, accuracy: 2µm at 3σ. Weight: approx. 1400kg. ... mais informação
Connected load: 200VA, with documentation, the device was hardly used. ... mais informação
There are 7 ready-to-load robots from the manufacturers Kuka and ABB available. 1) ABB IRB 1600-6/1,45: Year of construction: 2014, operating hours: approx. 24000h, running noises on axis no. 2. 2) Kuka KR 140 L100-2 comp: Year of construction: 2008, operating hours: approx. 29000h. 3) Kuka KR 30-2: Year of manufacture: 2004, operating hours: approx. 53000h. 4) ABB IRB 1600-6/1,45: Year of construction: 2012, operating hours: approx. 25500h. 5) Kuka KR 30-2: Year of construction: 2011, operating hours: approx. 2000h. 6) ABB type: unknown: Year of construction: unknown, operating hours: approx. 1500h. 7) Kuka KR 140: Year of construction: 2006, operating hours: approx. 44000h, without control panel. All robots (except 7) including control unit and operating panel.
CS744-MHC analyser with built-in oven and automatic oven cleaning, free-moving touch screen mounted on the instrument, LECO Cornerstone control and operating software, PC, Windows operating system, keyboard, mouse and documentation. ... mais informação
Max. Unwinding diameter: 1000mm, max. unwinding width: 1350mm, max. rewinding diameter: 400mm. Including various rewinding shafts (8mm-76mm), core hopper, roll separator, beater unit, film bander, shrink tunnel, various conveyor belts. ... mais informação
Format: 60-210x105-315mm, max. outer roll diameter: 600mm, power: 0.75kW. ... mais informação
A robot cell with 2x Stäubli grinding robots is available. The robots were used for steel grinding. Robot specifications: Axes: 6, payload: 14 kg, reach: 1900 mm, repeat accuracy: ±0.05 mm, control: Siemens, weight: 250 kg. Including all conveyor belts and peripheral equipment shown in the pictures. Documentation available. On-site inspection is possible.
Max. Operating pressure: 20 bar, max. temperature range: 120°C. ... mais informação