Fabricante:
(Categoria: 1300)
Operating modes: Automatic (at regular intervals) and pedal control. Volume range: 200ml-5000mm, material of product contact parts: AISI 316 stainless steel. ... mais informação
Connected load: 5.5kW, length: 1400mm, width: 1400mm, height: 600mm. ... mais informação
Envelopes (wallet): min.: 127mm/150mm, max.: 255mm/420mm, pockets: Center seam: min.: 228mm/127mm, max. 420mm/305mm, Side seam: min.: 228mm/127mm, max.: 420mm/262mm. Speed: 500 pockets/min, paper weight: 80g/m²-150g/m². ... mais informação
Connected load: 2,2kW, length: 1100mm, width: 1300mm, height: 500mm. ... mais informação
Cutting width min./max.: 25mm/1320mm, max. stack height: 140mm, pressure range: 30N-300N. ... mais informação
Connected load: 1.5kW, length: 1100mm, width: 1150mm, height: 500mm. ... mais informação
MAS 3a block making machine for paving blocks, hollow blocks and kerbstones. Board dimensions X/Y/Z: 1200mm/1100mm/50mm, production height min./max.: 50mm/330mm. 80x transport racks, 1700x base boards: dimensions X/Y/Z: 1200mm/1150mm/50mm. Bucket conveyor with Rekers drive and tipping drive: Bucket capacity: 1850l. 2000x pallets: Dimensions X/Y: 1000mm/1000mm. Forms: Concrete blocks: 36.5, 36.5 Z, 30, 24, 17.5, 11.5, 1.5 NF, NF. Expanded clay blocks: 36.5, 36.5 Z, 30.5, 24, 11.5. Lawn edgings: 5/25/100, 5/30/100. Kerbstones: 8/25/100, rectangular paving blocks: 10x10, 10x20, 20x20, 20x30, 30x30x8 cm, 20x20x8 cm without chamfer. Pavers: 6-8-10 H, 8er S, 6eck 7cm. Planting rings: small, large, oval (24x45x20). Special stones: lawn grids, filter stones. Including all accessories/conveyor belts etc. Documentation available. On-site inspection is possible.
power capacity:2x 5,5 kWfeed pressure:16 barliter capacity:2 x 585 l /minReceiver capacity:750 ltotal power requirement:380 V,50 Hz,11,2A, 2x5,5 kWweight of the machine ca.:940 kgdimensions of the machine ca.:3000 x 900 x 1650 mm ... mais informação
feed pressure:8 bar:Verd. 5050 min /1voltage:400 Vrated current:90 Atotal power requirement:46,5 kWweight of the machine ca.:1320 tdimensions of the machine ca.:1800 x 1600 x 2300 mmfrequency:50 HzEffizienz::7,4 m3/minIP::54 / 20 ... mais informação
power capacity:110 kWfeed pressure:10 barNumber of working hours:11 372 / Lastst. 7436 hvolume capacity:16,75 m³/mintotal power requirement:110 kWweight of the machine ca.:2,3 tdimensions of the machine ca.:2400 x 1630 x1820 mm ... mais informação
Basket size LxWxH:550 x 300 x 350 mmNo. of washing chambers:1 No. Of tanks for washing:1 Temperature for washing water:60 °CUltrasonic cleaning unit with high alloybasket- Ultrasonic frequency 28 kHz- automatic breakdown for heating and ultrasonic for low level water ... mais informação
Basket size LxWxH:800 x 500 x 400 mmMax. basket weight:250 kgNo. of washing chambers:1 No. Of tanks for washing:1 Electrical heating power:7,5 kWRated power supply:8 kVAMachine size LxWxH:1,5 x 1,15 x 0,9 mUltrasonic cleaning machine with 28 or 40 khz generator ... mais informação
Basket size LxWxH: 900 x 500 x 450 mmMax. basket weight:300 kgNo. of washing chambers:2 No. Of tanks for washing:2 Electrical heating power:24 kWRated power supply:30 KWtank capacity:250 / 180 lCapacity:140/120 LMachine size LxWxH:1,9 x 1,5 x 2,7 mCleaning device with 3 steps and basket dia. of 900 mmPLC control, tank exhauster pump
total power requirement:0,2 kWweight of the machine ca.:30 kgdimensions of the machine ca.:0,4 x 0,3 x 0,3 m ... mais informação
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação
Description: JIANGXI OK SCIENCE AND TECHNOLOGY CO. PBKZ mask making machine Chemical and Pharmaceutical Industry Machine for making community and medical masks. Medical masks : Type I, Type II & Type IIR.  , Manufacturer JIANGXI OK SCIENCE AND TECHNOLOGY CO. Model PBKZ mask making machine Purchase date end of April 2020 Masks per minute 80 pieces via 2 ejection belts Extras Folding and ironing unit for inner ear straps / Stacking unit on the ejector belts Further information Ultrasonic welding units partly renewed Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg
Description: Lot consisting of 4 knitting machines: serial number 5217120526 - ,Gauge 14 serial number 5217120525 - ,Gauge 14 serial number 5217120523 - ,Gauge 12 serial number 5217120522 - ,Gauge 12 Approx. Onsite Dimension. (l x w x h): 2,970 x 4,000 x 2,010 mm, weight approx.: 4,520 kg
Description: Lot consisting of 2 'Concentration plants': OI 40M concentrator - year 2017 Typical operating conditions: Quantity of water extracted: approximately 20,000 l/h Processing cycle: 10-18 h Concentration ratio: about 5 times Quantity of water processed per cycle: approximately 25,000 l/h Typical operating pressure OI: 25-35 bar Maximum temperature: 50° C The system is substantially composed of: AISI 316 L stainless steel washing tank of approximately 5 quintals Stainless steel preload centrifugal pump complete with three-phase motor 400 V, 50 Hz, power 4.5 kW 1 stainless steel bag safety filter 1 pressurization pump (multi-rotor centrifugal) in stainless steel complete with three-phase motor 400 V, 50 Hz, power 22 kW, regulation with inverter 2 stainless steel recirculation pumps complete with 400V three-phase motor, 50 Hz, 15 kW power, inverter regulation. hydraulic interco ...