- 3M-MATIC (1)
- AAT (1)
- ABB (23)
- ABB ROBOTICS (1)
- ABL (1)
- ABS INAUEN (1)
- Abus (9)
- ACE (1)
- ACHENBACH (1)
- ACMA GD (1)
- ACMI (2)
- ADICEN ALCATEL PASCAL (1)
- ADK (1)
- ADL (2)
- AEG (13)
- AEG ELOTHERM (1)
- AEL GMBH LEISNIG (1)
- AERO (1)
- AEROTECHNIK (1)
- Aerzen (2)
- Aerzener (4)
- Afriso (2)
- AGIE (3)
- AGIETRON (1)
- AGRAMKOW (1)
- AICHELIN (1)
- AIRATOR (1)
- AIRPOWER EUROPE (1)
- AIRTEC (1)
- AIRWELL (1)
- AL-KO (3)
- ALBERT STAHL (1)
- ALBIAN (1)
- ALCA IMPIANTI (1)
- ALCATEL (1)
- Alcatel Adixen (2)
- ALCATEL ADIXEN PASCAL (1)
- ALCOA (1)
- ALCOS (1)
- ALEXANDERWERK (1)
- ALFA (1)
- Alfa Laval (12)
- ALFAMACCHINE (1)
- ALFATEK (3)
- ALKETT (1)
- ALLWEILER (2)
- ALPHASTAUB (1)
- Alpine (2)
- ALPMA (1)
- Alsthom (2)
- ALTA (1)
- ALTENBERG ? (1)
- ALUP (2)
- ALURO (1)
- AMETEK LLOYD (1)
- AMG / PESCH (1)
- AMOB (1)
- AMS FERRARI (1)
- Angelantoni (2)
- ANSCHLAGWINKEL (1)
- APD VAKUUMPUMP #2912 (1)
- APE (13)
- ARIETE (1)
- ARJO HOSPITAL EQUIPMENT (1)
- ARKU (1)
- ARO (1)
- AROL (10)
- AROS HYDRAULIK GMBH (1)
- ASHE (1)
- ASHTON (1)
- ASTED-MICROVERK APS (1)
- ATB BAUKNECHT (1)
- ATLANTA (1)
- Atlas Copco (21)
- ATLAS-COPCO (1)
- ATMSOLUTIONS (1)
- AUDI, VW,BMW.FORD, (1)
- AUFSPANNPLATTE (1)
- AUFSPANNTISCH MIT T-NUTEN (1)
- Aufspannwinkel (3)
- AUFSPANNWINKEL AUS STAHL (1)
- AURA MARINE (1)
- AUTOMAT (2)
- AUTOOL (1)
- AVE (6)
- AXIS (1)
- AXTRA (3)
- AZO (1)
- B+M (1)
- BAIONI (1)
- BAJLER ZEMBROD (1)
- Balkancar (12)
- Balzers (2)
- Bar Gar (2)
- Baretta (2)
- BARTEC #3872 (1)
- BAUMER (3)
- Bavelloni (2)
- BC (4)
- BDK (1)
- ... mais
Fabricante:
(Categoria: 1300)
Ano de construção: 2007
usava
Max. roll diameter: 1250mm, max. speed: 100m/min, weight: 2.9t. ... mais informação
Ano de construção: 2004
usava
A horizontal, continuous, electric tempering furnace complete with pre-stressing cooler and post-cooling section is available. Total oven length: 19.44m, useful load width: 1250mm, length of tempering station: 15.12m, length of post-cooling station: 4m. Length of loading table: 4m, length of unloading table: 4m, total length of tempering system: 47.19m, including robot: 52m, total width without sound insulation: approx. 6.00m. Glass thickness range: 2.8mm to 10mm, max. glass size: 1250mm/2200mm, min. glass size: 100mm/250mm. Documentation available.
Ano de construção: 2003
usava
X-travel: 2500mm, y-travel: 1000mm, z-travel: 1200mm, software: Metrosoft CM. ... mais informação
Ano de construção: 2014
usava
A robot arm with gripper finger and camera is available. Sensor skin collaborative operation is possible. Reach: 911mm, repeat accuracy: +/-0.03mm, adjustable gripping force: 40Nm-120Nm, max. workpiece weight: 2kg. Transport dimensions X/Y/Z: 775mm/1600mm/730mm, working position X/Y/Z: 775mm/1900mm/960mm.
Ano de construção: 2001
usava
Ano de construção: 1999
usava
The machine was used for punching clay bowls, max. mould dimensions: 200x220mm, pressing force: 6kN, including plastering machine, oiling device and oil tank. ... mais informação
Ano de construção: 2007
usava
Weight: 2t, an inspection is possible, with documentation. ... mais informação
Ano de construção: 1986
usava
There are two identical machines available, compressed air connection: 5 bar, on-site inspection is possible. ... mais informação
Ano de construção: 2006
usava
Delivery head: 0-9.5m, pump speed: 6000/min, water temperature: 10-50°C, tank volume: 8m³, max. delivery pressure: 25bar, with documentation, on-site inspection is possible. ... mais informação
Ano de construção: 2018
usava
Number of axes: 6, reach: 3100mm, max. load capacity: 125kg, controls: FANUC SYSTEM R-30iB Plus, weight: 1.115t, operating hours counter: ca. 100h, with control system, an inspection is possible. ... mais informação
Ano de construção: 2017
usava
Print dimensions: 2000x1000mm, length: 3425mm, width: 815mm, height: 1765mm, weight: 600kg, including loading & unloading equipment, air-conditioned protective cabin and infrared preheating, with documentation, an inspection is possible. ... mais informação
Ano de construção: 1995
usava
X-travel: 380mm, y-travel: 450mm, z-travel: 280mm, max. load: 410kg, probe: Renishaw PH1, length: 890mm, width: 840mm, height: 1370mm, weight: 360kg, with documentation, an inspection is possible. ... mais informação
Ano de construção: 2016
usava
Includes two Rectifying Module BMR Colibrì, with documentation, an inspection is possible. ... mais informação
Ano de construção: 2020
usava
Max. rotational speed: 5000/min, chamfering/ calibration spindle power: 1.5/ 5.5kW, with documentation, an inspection is possible. ... mais informação
Ano de construção: 2020
usava
Description: JIANGXI OK SCIENCE AND TECHNOLOGY CO. PBKZ mask making machine Chemical and Pharmaceutical Industry Machine for making community and medical masks. Medical masks : Type I, Type II & Type IIR. , Manufacturer JIANGXI OK SCIENCE AND TECHNOLOGY CO. Model PBKZ mask making machine Purchase date end of April 2020 Masks per minute 80 pieces via 2 ejection belts Extras Folding and ironing unit for inner ear straps / Stacking unit on the ejector belts Further information Ultrasonic welding units partly renewed Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg
Ano de construção: 2023
usava
Max. glass thickness: 50mm, drilling diameter: 4-200mm, connected load: 1.5kW, weight: 270kg, the machine was never used. ... mais informação
Ano de construção: 2017
usava
Description: Lot consisting of 4 knitting machines: serial number 5217120526 - ,Gauge 14 serial number 5217120525 - ,Gauge 14 serial number 5217120523 - ,Gauge 12 serial number 5217120522 - ,Gauge 12 Approx. Onsite Dimension. (l x w x h): 2,970 x 4,000 x 2,010 mm, weight approx.: 4,520 kg
Ano de construção: 2001
usava
Max. operating temperature: 220°C, heating output: 137kW, compressed air supply: 6bar, connected load: 150kW, length: 5650mm, width: 3200mm, height: 1690mm, weight: 8t, with documentation. ... mais informação
usava
Description: Lot consisting of 2 'Concentration plants': OI 40M concentrator - year 2017 Typical operating conditions: Quantity of water extracted: approximately 20,000 l/h Processing cycle: 10-18 h Concentration ratio: about 5 times Quantity of water processed per cycle: approximately 25,000 l/h Typical operating pressure OI: 25-35 bar Maximum temperature: 50° C The system is substantially composed of: AISI 316 L stainless steel washing tank of approximately 5 quintals Stainless steel preload centrifugal pump complete with three-phase motor 400 V, 50 Hz, power 4.5 kW 1 stainless steel bag safety filter 1 pressurization pump (multi-rotor centrifugal) in stainless steel complete with three-phase motor 400 V, 50 Hz, power 22 kW, regulation with inverter 2 stainless steel recirculation pumps complete with 400V three-phase motor, 50 Hz, 15 kW power, inverter regulation. hydraulic interco ...
Ano de construção: 2006
usava
Fusing width: 600mm, max. temperature: 200°C, conveyor speed: 1-9m/min, connected load: 6.7kW, weight: 180kg, with documentation. ... mais informação