fresadoras usadas para venda

Used milling machine on behalf of a customer Manufacturer: Bokö Bohner & Köhle Type WF 2 Hydro Mill At the moment, the machine can still be viewed under electricity. ATTENTION Location: Bielefeld Sale from foundation.! Dismantling must be carried out by the customer. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at traders, ...

Finger jointed line Grecon Ultra - Made in Germany - year of production 2001 - for softwood and hardwood -DTR TECHNICAL PARAMETERS: length of elements min/max 150/1000 mm element width min/max 40/205 mm height min/max 20x80 ratio min. length / max. width 2:1 initial length min/max 3000/6100 mm disc motor power 5.5 kW blade spindle diameter 30 mm cutter motor power 22 kW spindle diameter 50 mm total length 11500 mm width 5300 mm total power consumption 39 kW air pressure 8 bar air consumption 660 NL/min stub diameter 250 and 100 mm extraction requirement 6150 m3/h 30m/s transport dimensions 1300 cm x 220 cm x 200 cm weight 6700 kg

Protective cover for milling curved parts on the ring etc. This protection device is often recommended by the BG. Maximum milling cutter diameter 160mm With thrust ring, brushes and brake wedge for the inrun bearing Obviously hasn't been used much so far. Year of construction unknown The machine can be demonstrated by appointment at our site. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Cast iron spindle moulder saws with: - side trolley for tenoning, on pole and with flag support, with tilting guide and useful stroke of about 1500mm - Saw unit for tenoning - Spindle moulder hood with AIGNER guides - with 3-wheel drive Machine not according to CE standards, for export AVAILABILITY FROM APRIL 2024

amount: 44 STK- Hob cutters for cylindrical gears & helical gears- Hob cutters for splined shafts- Hob cutters for splines- Hob cutters for sprockets- Hob cutters for toothed belt wheelsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

Moulded part radius milling machine with saw edge protrusion  ... mais informação

Code: 0106 Brand: OMEC - ITALY Model: 650-M Dovetailing machine Technical characteristics: Installed power on board machine Kw 0,75 Max working width mm 420 Center to center of indents mm 25-40-50-80 Overall dimensions: mm 800 x 720 x 1320 h Weight kg 130  ... mais informação

Code: 0650 Brand: OMEC - ITALY Model: 750 - CE Standard Automatic dovetailing machine for dovetail joints on drawers and different parts of furniture - CE Standard Technical data: Working width mm 480 Drawer front parts thickness mm 60 Spindle speed rpm 18500 Spindle motor power Hp 1,5 Tip translation motor power Hp 1,5 Overall dimensions mm 1200 x 800 x 1300 h Weight kg 350

I am selling an Automatic CNC Machining Center for BLOCK-HOUSE production AUER BL100. Built in 2001. Entrance table / max. element length 9.00m Trunnion cutter up to dia.200mm / 4kW Horizontal milling machine up to dia.200mm / 4kW Vertical milling machine up to dia.200mm / 4kW Automatic feed system AUER Austria BL100MS Programming Zebra Label Print TOS Svitavy PWM 45.11 End-cut Saw Rear Favorable for timber constructions! Available soon.

Lock Box Milling Machine Chain Clamp Chain Milling Machine Door Lock Milling Machine HAFFNER Type: SL100 3 Aggregates Chain stemmer. Stülpfräe Handle / door lock cutter rollable The machine originates from the age-related abandonment of a small construction and cabinetmaking workshop and is available now. Dismantling and loading can be organized by us. Settlement by appointment. Buyers can also pick up and test the machine themselves on site. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are a guideline. Depending on the agreement of dismantling and loading, or removal, these m ...

The INDUSTRY 2.0 series CNC milling plotter with a working surface of 1200x1200mm and a clearance in the Z axis equal to 300mm is equipped with an electrospindle with a power of 6kW and 24000 rpm. on a ceramic bearing. The working table of the machine is made in hybrid technology - it has vacuum sections and subsections for automatic, non-invasive clamping of the processed material, as well as T-Groove slots for manual clamping. Standard equipment Hybrid table, i.e. vacuum, enabling non-invasive fastening of the element, leaving the possibility of fastening Manual irregular shapes The frame of the machine is fully welded, stress relieved and then milled, which ensures the machining accuracy and stability of the operation Machine control with the NK-105 G2 DSP controller Tool height sensor included Central oil lubrication system for carriages and guides Optional as standard  ...

CNC milling machine 6090 INDUSTRY 2.0 600x900 ✅ Discover the quality benefits of the INDUSTRY 2.0 Series The INDUSTRY 2.0 series differs from the standard series by using the best and most precise motors in its class and the power transmission, which significantly increase the machining capabilities of the machine, making it the most industrialized series in this price range. ✅ The INDUSTRY 2.0 series CNC milling plotter with a working surface of 600x900mm and a clearance in the Z axis equal to 300mm is equipped with an electrospindle with a power of 6kW and 24000 rpm. on a ceramic bearing. The working table of the machine is made in hybrid technology - it has vacuum sections and subsections for automatic, non-invasive clamping of the processed material, as well as T-Groove slots for manual clamping. R9tu9xj Standard equipment ✅ Hybrid table, i.e. vacuum, enabling n ...

x-travel: 650 mmy-travel: 540 mmz-travel: 620 mmControl: Heidenhain type: iTNC 530 table surface area: 800x540 mmTool changer: 20 Posspindle taper ISO: 40 turning speeds: 50-10.000 U/minCooling through the spindle: 20 barworkpiece weight: 600 kgtotal power requirement: 14 kWweight of the machine ca.: 4,2 tdimensions of the machine ca.: 2,4x2,1x2,9 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WEINMANN POWER WMP 220 wood machining centre for workpieces Year of manufacture: 2014 Photos in attachment Price on request ... mais informação

TechnologieCNC Milling Machine CNC 1530 6kW INDUSTRY CNC milling machine 1530 6kW - INDUSTRY version ✅ Professional, industrial CNC milling machine mod. 1530 INDUSTRY with a 150x300cm working table equipped with an ultra-efficient 6kW electrospindle on a full ceramic bearing. The height of the Z axis is 300mm. ✅ The machine is protected by protective light barriers that prevent intrusion into the working area of the machine during operation. ✅ The working table of the machine is made in hybrid technology - it has vacuum sections and subsections for automatic, non-invasive clamping of the processed material, as well as T-Groove slots for manual clamping. Information: Manufacturer: TechnologieCNC Model: 1530 INDUSTRY Electrospindle: 6kW at S1, 7.2kW at S6. 24000rpm on a full ceramic bearing Max. speed in slow travel: up to 33m/min Max. working speed in materi ...

CNC milling machine 2100x4000mm 9kW HEAVY DUTY TechnologieCNC CNC Industry 2.0 2140 ATC The INDUSTRY 2.0 ATC series differs from the standard series by using the best and most precise motors in its class and the power transmission, which significantly increase the machine's machining capabilities, making it the most industrialized series in this price range. ✔The INDUSTRY 2.0 ATC series CNC milling machine with a working surface of 2100x4000mm and a clearance in the Z axis equal to 300mm is equipped with an electrospindle with a power of 9kW and 24000 rpm. on a ceramic bearing. The working table of the machine is made in hybrid technology - it has vacuum sections and subsections for automatic, non-invasive clamping of the processed material, as well as t-groove slots for manual clamping of irregular shapes. ✔ATC - The machine is equipped with an automatic linear magazine wi ...

TechnologieCNC Milling Plotter CNC 1530 INDUSTRY 2.0 ◼Invest in the quality of the INDUSTRY 2.0 Series The INDUSTRY 2.0 series differs from the standard series by using the best and most precise motors in its class and the power transmission, which significantly increase the machining capabilities of the machine, making it the most industrialized series in this price range. ◼The INDUSTRY 2.0 series CNC milling plotter with a working surface of 1500x3000mm and a clearance in the Z axis equal to 300mm is equipped with an electrospindle with a power of 6kW and 24000 rpm. on a ceramic bearing. The working table of the machine is made in hybrid technology - it has vacuum sections and subsections for automatic, non-invasive clamping of the processed material, as well as T-Groove slots for manual clamping. Covscsx ◾Hybrid table, i.e. vacuum, enabling non-invasive fixation of th ...

CNC Wood Milling Machine 6KW 1300x2500 CNC milling machine 1325 INDUSTRY 2.0 6KW 1300x2500 ◼Invest in the quality of the INDUSTRY 2.0 Series The INDUSTRY 2.0 series differs from the standard series by using the best and most precise motors in its class and the power transmission, which significantly increase the machining capabilities of the machine, making it the most industrialized series in this price range. ◼The INDUSTRY 2.0 series CNC milling plotter with a working surface of 1300x2500mm and a clearance in the Z axis of 300mm is equipped with an electrospindle with a power of 6kW and 24000 rpm. on a ceramic bearing. The working table of the machine is made in hybrid technology - it has vacuum sections and subsections for automatic, non-invasive clamping of the processed material, as well as T-Groove slots for manual clamping. ◾Hybrid table, i.e. vacuum, enabling non ...

CNC milling machine 6090 INDUSTRY 2.0 600x900 ✅ Discover the quality benefits of the INDUSTRY 2.0 Series The INDUSTRY 2.0 series differs from the standard series by using the best and most precise motors in its class and the power transmission, which significantly increase the machining capabilities of the machine, making it the most industrialized series in this price range. ✅ The INDUSTRY 2.0 series CNC milling plotter with a working surface of 600x900mm and a clearance in the Z axis equal to 300mm is equipped with an electrospindle with a power of 6kW and 24000 rpm. on a ceramic bearing. The working table of the machine is made in hybrid technology - it has vacuum sections and subsections for automatic, non-invasive clamping of the processed material, as well as T-Groove slots for manual clamping. Standard equipment ✅ Hybrid table, i.e. vacuum, enabling non-invasive ...

Table extension, extendable support, finely adjustable milling fence, stop adjustment via handwheel, clockwise/counterclockwise rotation---------- Technical Data ----------table size: 2,530x730 mm, work table height: 910 mm, spindle diameter: 30 mm, effective milling spindle length: 130 mm, max. milling cutter diameter: 300 mm, max. retractable milling cutter diameter: 300 mm, height adjustment: 180 mm, speeds: 3000/4,500/6,000/8,000/10,000 rpm, Motor: 7.5 kW, Suction nozzle: 120 mm, Suction nozzle bottom: 120 mm, Dimensions (LxWxH): 2,620x1,000x1,170 mmSold as is, without technical inspection