fresadoras usadas para venda

Swivel spindle milling machine SCM Samco Type T 40 I Machine No. KK/038438 Year of construction 1997 Includes 3 rollers of feed Includes table extension Swivel cutter head included Spindle diameter 30 mm Spindle swivel 90° - 45° Motor power 3 kW Engine Brake Spindle left clockwise Table size 870 mm x 560 mm Spindle clamping length 135 mm Maximum tool diameter 180 mm Suction nozzle diameter 120 mm Speed 1400/3500/6000/8000 rpm. Weight with feed approx. 250 kg

Combined Saw / Milling Machine / Slotted Hole Drilling Machine Make Hombak With 3 rollers of feed wood Table milling machine with 30 and 40 mm spindle Swivel saw table Saw table with width stop Motor power approx. 3 kW  ... mais informação

Profile milling machine Bäuerle - Cross section milling machine Type: PM 510 Machine No. 126/91 Year of construction: 1991 Table size 1250 x 410 mm Tool span 510 mm Tool flight circle diameter max. 250 mm Milling height max. 250 mm Milling depth 65 mm Milling spindle diameter 40 mm Table height 870 mm Motor power 18.5 kW, 380 V, 50 Hz, 35 Amp. Working cycles per minute max. 6 Operating pressure max. 6 bar Air consumption 140 l/min. Feed speed 0 – 4.5 m/min. Revolutions per minute at flight circle diameter 180 mm 6000 rpm Revolutions per minute at flight circle diameter 200 mm 4800 rpm Suction nozzle diameter 160 mm with 16 mini tine milling cutters 15 mm cutter width on 500 mm total width with instruction manual Weight: 780 kg Machine dimensions L 1250 mm x W 1270 mm x H 1600 mm

Vacuum pump Becker Type VT 3.40 Machine No. D1180485 Built in 1991 Speed 1420 rpm. Suction volume 40 m³/h Suction pressure -900 mbar Motor power 1.25/1.5 kW  ... mais informação

Planer for round bars solver with magazine Type: VF 120 Year of construction: 1987 max. workpiece thickness 120 mm with 2 planer heads and 2 knives each (4 knives in total) in the machine and 2 spare planer heads and 2 knives each (4 knives in total) for round bars in 8 mm Feed speed 5-25 m/min. incl. slide-in magazine solver suitable for the production of dowel rods, round and profile rods

Double-end tenoner Torwegge Working width 3000 mm per side: 2 x shredders swivel 3.7 kW at 50 Hz/5.5 kW at 100 Hz complete with converter Chain transport with cams  ... mais informação

Carousel milling machine self-made Table diameter 550 mm 1 milling arm with soundproofing cabin  ... mais informação

Table milling cutter cutter with sliding table Type SK 2/4 Table size 1040 mm x 900 mm 2 table inserts diameter 440 mm and 120 mm Spindle diameter 30 mm Spindle length 125 mm Revolutions 3000/4000/5000/6000/8000/10,000/rpm. Motor power approx. 5.5 kW With 3 rollers of feed wood-made Sliding table table surface 770 mm x 400 mm Sliding distance 1200 mm Weight approx. 700 kg

Sculptor copy milling machine Brand Reichenbacher Type R632 / 40 Machine number: 2068 2 80 Milling of wooden figures e.B. nativity figures etc. with copy pen. Also to be used as a copy car carving machine. Machine is to be operated manually. 6 workpieces can be machined simultaneously. Clamping length maximum 1050 mm Workpiece diameter maximum 300 mm If each spindle is used, maximum workpiece diameter 150 mm Milling motor motor power 0.5 kW each Dimensions 3700 mm x 2200 mm x H approx. 1500 mm The machine is in stock with us, but still needs to be assembled and tested.

Double end tenoner Schwabedissen Type: DAa 200 Working width 1000 mm 3 motors per side: Saw 8.3 kW swivel Milling machine 4.5 kW swivel Milling machine 4.5 kW swivel Chain track with cam spacing 380 mm Lower chain projection 500 mm External dimensions 3600 mm x 2340 mm  ... mais informação

Turning machine Tip height 160 mm Tip width 1000 mm 3 speeds Flat disc diameter 190 mm Beitel auflage Power connection 380 volts Dimensions 1460 mm x 900 mm x H 1100 mm  ... mais informação

Chain cutter Haffner Type KF 20 Machine No. 16809 With door rest Engine strength 1.7 kW Weight 100 kg Dimensions 900 mm x 800 mm x H 1950 mm  ... mais informação

Dowel wreaths for dowel cut-out and chamfing machine solver type AA 220 available for the following dowel diameters: Ø 5mm = 3 pieces Ø 6mm = 6 pieces Ø 8mm = 6 pieces Ø 10mm = 6 pieces Ø 11mm = 3 pieces Ø 12mm = 4 pieces Total 28 pieces. Especially for the wreaths for 6 and 8 mm dowels, special designs are included, for dowels 6x20 or 8x25.

Chain milling machine VEB Type KFM Motor power 2.2 kW Table tiltable 30° -0°- 30°, height adjustable, adjustable to left-right Pressure from the front Sword 50 x 150 for chain 12 – 17 mm Dimensions 1100 mm x 1000 mm x H 1620 mm Weight with pallet 511 kg  ... mais informação

Fezer chain milling machine Motor power 1.5 kW With door support Weight approx. 150 kg  ... mais informação

Protective cover for framing curly parts on the ring etc. This protective device is often recommended by the BG. Maximum fraeser diameter 160mm With start-up ring, brushes and brake wedge for the start-up bearing Obviously hasn't been used much before. The machine can be demonstrated by appointment with us on site. We only offer machines that are ready for preparation in our warehouse, see "further offers from this supplier".

Trunnion carriage from Panhans with clamping device for use on table milling machines Length of base plate approx. 1000mm Sliding distance approx. 710mm Eccentric clamps for fixing the workpieces Stop can be tilted The machine can be demonstrated by appointment at our site. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Nice entry-level assortment: 16 milling heads and 6 grooving discs, etc. Some profile milling heads, radius milling cutters large, groove discs, adjustment groovers, rebate head, glue milling cutters, flattening cutters, swivel cutter heads, universal profile heads with various used profile knives and various thrust rings, as well as many new inserts All cutters for 30mm mandrels. Sale only complete as shown and only to traders, not to private individuals. In sturdy steel cabinet with four pull-outs. Dimensions approx. 600 x 800 x 1000mm, weight approx. 230kg Trolley board included The milling cutters can be viewed on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Robust swivel milling machine 245 medio from Panhans - Hokubema swivels from 45 to +45 degrees in very good equipment and rolling table Ideal machine for window manufacturers due to roller table Positioning control in 2 axes for spindle height and spindle inclination Reinforced drive motor 7.5kW with automatic motor brake and stepless speed control from 1500 to 10,000 rpm R/L barrel Swivel angle from -45 to +45 degrees, electrically adjustable Height adjustment electrically adjustable HSK-80 Rapid shaft change spindle with 30mm diameter, change to other diameters is possible quickly Comfort stop with digital display of the total adjustment, adjustment by hand crank Stop with comfort lifting device hydraulically swivel away (for bow milling work, etc.) Zeromaster Reference Device for Milling Height Adjustment Table extension on the right with extendable workpiece support Tab ...

CNC machining center Manufacturer: MKM Model: UNI_Compact Year of construction: 1999  ... mais informação