fresadoras usadas para venda

Onsrud twin table copy shaper ONSRUD-auto dual table rotary shaper, model RS-28, for continuous production, 2-speed cutter (5,000/10,000 rpm.) pivots alternately to the right or left table, as center clamp engages, the table rotates, the cutter pivots into your part and continues around template machining the part, the operator unloads and loads new part on alternate table, when cut is complete, operator presses the foot pedal, the cutter then pivots to alternate table &cuts, cycle continues.. $9,900 Contact Fred (716) 433 4224 (12:00 noon is best time to call)

Pantograph SCM R8, manual, reach 800mm Not to CE standards, for export  ... mais informação

Used OMP chain quarrying machine  ... mais informação

Spindle moulder SCM model T130N: – 1200 x 730 mm worktop – FAST sector plan, instead of rings – shaft D=35mm – Motor power kw 5,5 / HP 7,5, volt 380 – 5 shaft rotation speeds: 3000/4500/6000/7000/10000 rpm – adjustable spindle moulder cap – complete with 3-wheel driver Machine according to CE regulations

Protective cover for milling curved parts on the ring etc. This protection device is often recommended by the BG. Maximum milling cutter diameter 160mm With thrust ring, brushes and brake wedge for the inrun bearing Obviously hasn't been used much so far. Year of construction unknown The machine can be demonstrated by appointment at our site. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Spindle diameter 30 mm Spindle speeds (4 levels) 1800/3000/6000/9000 RPM Spindle stroke 100 mm Spindle turning - 5° up to + 30 ° Max clamping height 105 mm Work table 710 x 640 mm Table height 900 mm G & HM-FS200S-STI  ... mais informação

Precision Shaper fence for cutting tool to Max D = 250 mm with fine adjustment The locking bolt hole spacing: 330 mm Diameter extraction: 120 mm with Multieinstellsystem with safety rulers: L = 500 mm, 155 mm high  ... mais informação

WJ-F102-1150 Mill: swivel 90-45 Spindle speeds (6 steps) 3000/4000/5000/6000/8000/10000 rpm Sliding table:1150mm (Optional 1600mm) M?o?t?o?r?l?i?i?t?u?n?g?: 400V 3 kW (4.0 hp) max. clamping height: 125 mm Table opening: 270 mm max. tool diameter retractable: 260 mm Options at extra cost: Telescope 900mm Eccentric tensioner Milling motor 4 KW (5.5hp), S1 100% Milling motor 5.5 KW (7.5 hp), S1 Milling spindle 40.50 or 60mm Integral safety rails 500mm Right and left-hand running milling cutter Table extension right/left

Engine power: 400V 3 KW 4 HP, 2 engines Formatschiebetisch: 1500mm Cutting height: 103 mm Blade: swivel, max. 315 mm Milling cutter: starr 90° Blower rpm: Rpm: 1500/3500/6000/8000 RPM. WJ-400100 K NET 2990,-new  ... mais informação

Cast iron spindle moulder saws with: - side trolley for tenoning, on pole and with flag support, with tilting guide and useful stroke of about 1500mm - Saw unit for tenoning - Spindle moulder hood with AIGNER guides - with 3-wheel drive Machine not according to CE standards, for export AVAILABILITY FROM APRIL 2024

Milling machine for connecting drawers OMEC 750 The machine is designed to make connections min. drawers, boxes The operator sets two components at the same time, then the machine Automatically mills along the entire length Spindle on eccentricity Milling motor power 1.1 kW Spindle speed 18000 RPM Two speeds of 25 and 35 n/-1 Machining parameters: Front thickness: min/max: 7/60 mm Sidewall thickness: min/max: 10/30 mm Key height: min/max: 6/18 mm Machine dimensions: 1300x700x1200h mm Machine weight: 400 kg

Spindle tenoning machine SCM T130 Motor power 7,5kw Machine control from puplite Electric spindle setting Sidecar for trunnion Total spindle height 200mm Spindle diameter 40mm Variable rotation on the belt Spindle speed 3000/4500/6000/7000/10000rpm CE Certificate Extraction nozzles 2x120mm

I am selling an Automatic CNC Machining Center for BLOCK-HOUSE production AUER BL100. Built in 2001. Entrance table / max. element length 9.00m Trunnion cutter up to dia.200mm / 4kW Horizontal milling machine up to dia.200mm / 4kW Vertical milling machine up to dia.200mm / 4kW Automatic feed system AUER Austria BL100MS Programming Zebra Label Print TOS Svitavy PWM 45.11 End-cut Saw Rear Favorable for timber constructions! Available soon.

Finger jointing line "GreCon Dimter" (WOLK) Technical specifications: Semiautomatic finger-jointing line,including: milling unit with automatic feed, automatic gluing unit. Transporter between milling unit and hydraulic press. Overall dimensions, mm - 10000х2500х1800 "Machine weight, kg - 5,500 " Productivity, m³ / h - 3 Details height, mm- 22-58 Details length, mm-170-410 Year :2015

Double sided round end tenoner Balestrini mod. TTSA Description:  Double sided round end tenoner Balestrini mod. TTSA complete with loader 1. Automatic loader 2. Control panel 3. min / max working length 240/1200 mm 4. maximum tenon size 100x30 mm 5. Capacity: 1200 tenons/hour (600 pieces/hour) 6. Tool rotation 9,000 rpm 7. Total power 6,5 kW

Rotary milling machine.Auto copy shaping machine with profile sander LH-100-4PS This equipment can be applied on first rough copy-shapings. No matter they are round, oval, rectangle or irregular profiles, all can be roughly copied and shaped out at one time. It can save much time if using band saw for first rough cuttings. Technical specifications: Max shaping capacity- 2250mm x 1100mm Disc dia -1800 mm Round disc revolving speed-0,5-3 RPM Main spindle revolving speed-9000 RPM Main spindle dia -30 mm Shaping cutter dia-100 mm Driven wheel dia -100 mm Round disc driving power-3 HP Main spindle driving power-10 HP x 2 Sander power-3 HP x 2

Double-sided tenoning machine Helma DRP 2000 Spindle rotation speed 6400 rpm Max blank length 2000 mm Feed speed 2 m/min Power 7 kW Weight 2750 kg Overall dimentions 4000x2000x2000 mm  ... mais informação

Flush milling machine HolzHer UF 362 with feed HolzHer 3 rolls Width max. 50 mm 2 motors 0.55 kW, 3 x 400 V, 50 Hz Year of construction 1984 Weight approx. 300 kg L x W x H: 120 x 100 x 130 cm The Fraese is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

I sell a 4-axis CNC machining center Biesse Rover 24L with truss table Year of construction 2004. Configuration: 4-axis main spindle HSD freshly fully repaired / Water-cooled RS1600 Tool magazine 7 positions ISO30 on the head 1x groove saw X-direction Drill head 14+4+2 drilling spindle Usable work surface 4500x1330mm. 2 work surfaces, 4 clamping zones Automatic system of Central Lubrikazion Combined power 35kW XDNC 2.01 software with operating instructions. Pump Becker 250/300 m3/h. 5,5KW Additional vacuum for stencil work or additional clamping devices. Good condition. Available from stock. Need for repair: handles on the truss table, Rotazion from ISO30 magazine on the head

Lock Box Milling Machine Chain Clamp Chain Milling Machine Door Lock Milling Machine HAFFNER Type: SL100 3 Aggregates Chain stemmer. Stülpfräe Handle / door lock cutter rollable The machine originates from the age-related abandonment of a small construction and cabinetmaking workshop and is available now. Dismantling and loading can be organized by us. Settlement by appointment. Buyers can also pick up and test the machine themselves on site. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are a guideline. Depending on the agreement of dismantling and loading, or removal, these m ...