fresadoras usadas para venda

3-axis machine for milling and drilling Working dimensions: X - axis: 4,000 mm Y - axis: 1,200 mm 6 workpiece supports 4 lifting rails for positioning heavy workpieces Rear row of stops medium row of stops (especially facilitates the assignment of the machine with small workpieces) Left-hand and right-hand stops on the side 20 pcs vacuum cups Vacuum pump 90 cbm/h incl. coolant unit for main spindle Stepping mat protection in front of the machine Machining equipment: Milling unit 7.5 kW, 1,500 - 18,000 rpm Tool holder HSK 63 F Spindle water-cooled with separate cooling system Tool change magazine 8 times moving along with the milling spindle Drill head with 21 vertical drilling spindles, pitch 32 mm Spindles can be called up individually ATTENTION: 1 spindle defective Horizontal drill head with grooving unit in crosshead design 0 / 90 degree sw ...

Technical data (subject to change) spindle for cutter mandrels MK5 Adjustment of the spindle height by handwheel Table opening can be adjusted via insert rings Speed change via belt reassignment (3,000 / 4,500 / 6,000 / 9,000 rpm) Brake by foot pedal Weight approx. 600-700 kg  ... mais informação

- with swivel milling spindle - Three-phase motor 6.5/8.0 kW f. 6 speeds 1500/2250/3000/4500/6000/9000 rpm. - Electronic digital displays incl. 2 separate rotary switches for electr. Height and swivel adjustment of the milling spindle (rapid and creep speed in all directions) -Push button for electric upward movement - Milling fence with fine adjustment and Steel Stop Jaws Specifications: Table size 1350 x 800 mm Table height 870 mm Swivel range -5 degrees to +45 degrees Height adjustment approx. 150 mm Mandrel 30 mm, MK 5 Suction nozzle 120 mm diam., 2 pieces Dimensions (LxWxH) 1400 x 1300 x 1150 mm Weight 950 kg. incl. Holz-Her 4-roller feeder (8 speeds), Aigner table extension and stop for insertion milling.

Facilities: - Aigner Integral Stop - Feed apparatus (3 rolls) - manual foot brake - Height adjustment by hand wheel - Aigner table extension  ... mais informação

see photos  ... mais informação

Table milling machine Comag Technical data • Speed (rPM): 2500/4500/6000 • Machine is in working condition  ... mais informação

- with lateral Kappsaege  ... mais informação

Bench milling machine Wood milling machine Carpentry milling machine Type: TV700 4 speeds adjustable Milling fence with fine adjustment Milling fence with pressure device max. tool diameter 135 mm incl. milling shaft 30 mm suitable feeders can be found in my other articles. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are a guideline, depending on the distance and unloading option, they may vary.

Bench milling machine Wood milling machine Carpentry milling machine SCM Type: T120C 5 speeds adjustable 2900/4400/6600/7800/10 000 rpm Table dimensions approx. 110 x 90 cm Milling fence with fine adjustment Milling fence can be rotated on the machine table. max. tool diameter 325 mm incl. milling shaft 30 mm suitable feeders can be found in my other articles. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are a guideline, depending on the distance and unloading option, they may vary.

Gebr. Chain Clamp HARBS UKS YOC 1962 on base frame Transport height: 172 cm incl. various chains Sold in ACTUAL condition and unrefurbished from carpentry dissolution. Fixed price.  ... mais informação

SECOND-HAND CN SELF-LEARNING CARVING MACHINE GIORDANENGO - center distance 20 mm. - 10+10 bit each side - total 40 bits  ... mais informação

ROUND END TENONER WITH 2 BENCHES BALESTRINI MOD. PICO CN – CE RULES - max. horizontal tenon length 160 mm - max. vertical tenon length 100 mm - max. bench inclination 20° - inclination of workpiece support guides: 45° - production: 600/700 tenons per hour - spindle Ø 25 mm - benchs: dimensions 315x360 mm longitudinal axis inclination 0° ÷ -20° piece support guide adjustment 0° ÷ 45° - Numerical Control piece support guide adjustment 0° ÷ 45° axis movements 2 DC motors brushless” X axis stroke 600 mm Y axis stroke 200 mm X, Y axis speed 15 m/min. execution of programs in quick tasks program memory 1000 pcs. programming using macros - 9000 / 12000 rpm. - cutter motor power 4 hp - volts. 380/50 - year 2012 - CE Standards

- Table size (W x D): 500 x 120 mm - with clamping jaw - Size stop plate (W x H): 520 x 265 mm - Stop plate can be moved left and right - Tilt of table and stop: 45° to the left or right - Depth of the sawing unit: 175 mm - automatic lubrication of the saw chain - Diameter suction connection: 600 mm - incl. chains: 2 x 6mm; 1 x 8 mm; 2 x 10 mm; 1 x 11 mm; 2 x 12 mm; 2 x 14 mm; 2 x 16 mm - incl. swords: 1 x 6|40x150; 2 x 12-14|40x150; 2 x 16|40x150 - Weight: approx. 350 kg Engine data: - Connection voltage: 380 V - Frequency: 50 Hz - Current: 3.5 A - Power: 1.5 KW - Speed: 2,880 rpm - Control voltage: 220 V Dimensions (H x W x D): 1,800 x 600 x 900 mm Transport dimensions (H x W x D): 1,900 x 800 x 1,200 mm (without stop plate) on EURO pallet Transport dimensions fully assembled (H x W x D): 1,900 x 1,400 x 1,200 mm on EURO pallet Weight: approx. 400 kg (i ...

Type: T-01 Exhibit and demonstration model! - Table length: 1200 mm - Table width: 530 mm - Table height: 900 mm - Length of slide: 1,200 mm - Width of the slide: 315 mm - Height of the slide: 142 mm - Inclination of the milling spindle: 0 to -45° - Useful length of the milling spindle: 125 mm - Spindle speeds: 3500/6000/8000/10000 rpm - Thorn diameter: 30 mm - max tool diameter: 240 mm - max. can-draw tool diameter: 230 mm - Profile milling: 210 - 240 mm - Cone milling: 320 mm - Diameter suction nozzle: 2 x 120 mm electrical connection: - Motor power: 5.0 kW - Voltage: 400 V - Phases: 3 Ph - Current type: AC (AC) - Frequency: 50 Hz Dimensions: - Length: 1200 mm - Width/depth: 1400 mm - Weight: 510 kg Space: - Length: 4,400 mm - Width/depth: 4,420 mm The data refer to the recommended installation area and result from the dimensions of the machine  ...

• max workpiece thickness: 55 mm • min. workpiece width: 80 mm • max profile depth: 80 mm • max edge thickness: 3 mm • Table size: 800 x 380 mm • Foot pedal operation • Adjustment via mechanical counters • Weight approx. 120 kg (Changes and errors in the technical data and prices reserved!)

technical details: - Milling depth: 0 - 80 mm - Diameter suction nozzle: 60 mm - Swallow size: W-1/2/3 - Dimensions (W x H x D): 600 x 770 x 540 mm - Weight: 19 kg - Operation: manual - Workpiece clamping: manually via hand lever - Passage height: 110 mm Stop elements: -1 x Stump Stop - 1 x stop plate 45° (angle stop) - 1 x measuring scale (All settings are done manually.) Controls: - 1 x milling depth adjustment - 1 x workpiece clamping - 1 x chip breaker Motor data (milling unit): - Power: 0.5 kW (530 W) - Voltage: 230 V - Frequency: 50 Hz - No-load speed: 29,000 rpm The machine mills one keyway per work cycle for the above-mentioned dovetail sizes. All Hoffmann accessories can be used on this machine. (Changes and errors regarding technical data and prices excepted!) In accordance with our terms and conditions, we would like to point out once  ...

SCM Swivel spindle milling machine - T110 i Product name: Swivel spindle milling machine Type: T110 i Manafacture: SCM Machine number: 071215 Year of construction: 1996 Condition: used, overhauled Technical details: - Table dimensions: 1,000 x 650 mm - Table height: 920 mm - Useful length of the milling spindle: 150 mm - Adjustment range of the milling spindle: 150 - 20 mm - Spindle diameter: 30 mm - Spindle speeds: 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm - Number of rings of the table insert: 5 pieces - Diameter suction nozzle: 120 mm, 2 pieces - Foldable Aigner integral stop - FRIED chip trapping and milling protection device - VARIOFEED feeder, 3 wheels - 2 x table extension, each 1,100 mm - Weight: 430 kg - Swivel range of the milling spindle: -5° to 45° Engine data milling machine: - Power: 4 kW - Voltage: 380 V - Current: 9 A - Frequency: 50 Hz ...

JAROMA DYFD-2 combined milling machine/saw Product name: Milling machine Type: DYDF-2 Manufacturer: JAROMA (Poland) Machine number: 3814 Year of construction: 1982 Condition: used, checked Technical details: - Spindle diameter: 25 mm - usable height (spindle height): 110 mm - Spindle inclination: 5° in both directions - Table dimensions: 1,120 x 750 mm - 2 x suction nozzles, diameter 100 mm - 1 x additional 380 V connection for a feed - Spindle height and inclination can be adjusted manually - removable drawer for cleaning - Machine dimensions (set-up) L x W x H): 1,120 x 830 x 1,100 mm Engine data: - Voltage: 380 V - Frequency: 50 Hz - Power: 3.8 / 3.0 kW - Speeds: 2,900 / 1445 rpm (2 speeds) Transport dimensions (L x W x H): 1,200 x 840 x 1,220 mm (on EURO pallet) - Number of packaging units: 1 - Weight: approx. 700 kg The machine has been overhauled  ...

SECOND-HAND DOUBLE SIDED ROUND END TENONER BACCI TYPE TSD-E – CE RULES - working length mm. 1200 - max tenon length 100 mm - production: 2400 tenons/hour (1200 pieces/hour) - tool rotation 9,000 rpm - tenoning units motors (n.2) 8 hp (4hp cad.) - with loader CSF2 - nc ISAC - perimetral net - volt. 380/50 - year 1996

SECOND-HAND COPYING ROUTING CARROUSEL WITH 6 WORKING STATIONS CAMAM MOD. GC6/4F/1L - double locking cylinder on each working station - 1 inside/outside milling unit - 1 inside milling unit - 1 ouside milling unti - 1 outside sanding unit - 4 sides cabin with roof - kw 28 - year 1995  ... mais informação