retificadoras usadas para venda

Drum motor belt sander belt sander-Spare part for: a grinding machine-Drum: Ø 150 mm-Drum length: 250 mm-Speed: 2830 rpm-Power: 1.80 kW-Shaft mount: Ø 22 mm-Total length: 385 mm-Also other sizes in stock: available-Weight: 16 kg ... mais informação

Worm wheel and gear set, edge grinder, edge grinder, grinder, drawer grinder -a set consisting of: 1 worm wheel and 1 gear wheel for the oscillation -is a: original husband spare part -for: husband edging machine -different form: single-thread or and two-thread available -Multiple sentences: available -Price: for 1 set -Weight per set: 1.4 kg

Modular unit, finishing unit, sanding unit, sanding station, belt sander, belt sander, edge sander, edge sanding machine, profile sanding unit, small belt sander -comes from a Homag edge banding machine -swivelling -height adjustable -Max. Sanding belt width: 80 mm -oscillated -Sanding shoe: with air cushion -Drive: 1.1/1.4 kW -Speed: 1425/2850 rpm -Sanding shoe dimensions: L/W mm -Dimensions: 1000/1200/H1000 mm -Weight: 292 kg/piece

Sanding drum (rubber air drum) Original product from KED, (Kurt Husband) -Type: G 10 x 15 for hand drill -consisting of: base body, rubber hose, air valve, 2 clamping caps for rubber hose -Dimensions: -Diameter: 100 mm -Grinding length: 150 mm -Length of the body: 190 mm -Available on request in other sizes: -e.g. diameter: 40 mm, 60 mm, 75 mm, 100 mm, 125 mm, 150 mm, 175 mm, 200 mm, 250 mm, 300 mm -e.g. grinding length: 100 mm, 150 mm, 200 mm, 250 mm, 300 mm, 400 mm, 500 mm -also available as a brush abrasive. -We also carry general Ehemann spare parts. -Price grinding drums in the attachment PDF file

Edge grinder, edge grinder, grinder-Grinding height: 75 mm-Grinding length: 390 mm-Dimensions: 780/300/H520 mm-Weight: 40 kg ... mais informação

Disc grinder, disc grinder, disc grinder, disc grinder, edge grinder, edge grinder-Drive: 2.2 kW 3000 rpm-Plate diameter: 420 mm-Table size: 50 x 420 mm-Dimensions: 1000/600/H1150 mm-Weight: 210 kg ... mais informação

Gebr. Long belt sander JOHANNSEN T93 YOC 1994 Motor power: 4.0 kW Table size: 278 x 80 cm electr. Table Lift Hinge dimensions: 150 x 7,400 mm Suction connection: 180 mm Offsetting (right): 450 x 220 mm Table support (wood) renewed Dimensions: 220 x 395 cm Weight: 550 kg  ... mais informação

Wide belt sander Bütfering SWT 525 QC Optimat Working width 1350 mm Number of aggregates 2 1. Transverse grinding unit with -Inside running felt ribbed tape - infinitely variable, frequency-controlled cutting speed 2 – 16 m/s. -an electromagnetic segment pressure bar for high tolerance compensation for fine and varnish sanding -Belt blow-off device, workpiece-controlled 2. 1 combined grinding unit with: • Automatic aggregate locking - infinitely variable, frequency-controlled cutting speed 2 – 18 m/s. -an automatically adjusting, profiled steel contact roller, with grain compensation for calibration -an electromagnetic segment pressure bar for high tolerance compensation for fine and varnish sanding -Grinding insert 110 mm wide • Co-rotating and counter-rotating device of the abrasive belt -Strip blow-off device, workpiece-controlled (one blowing rod each for co-r ...

Used grading and sanding machine VIET mod. CHALLENGE 321B EC Sanding width mm 1100 1st group: calibrating roller diameter 240 mm hardness 90 sh with pneumatic exclusion from the control panel 2nd group: sanding roller diameter mm. 240 hardness 60 sh with pneumatic exclusion from the control panel 3rd group : automatic pneumatic pad Encoder control and external buffer pressure adjustment I° belt motor KW 11 rpm 1400 II° and III° belt motor KW 11 rpm 1400 Engines with automatic start Digital Dimension Display Check panel Vacuum table Plane positioner with work piece Tape development mm. 2620 x 1130 Weight kg. 3100

Band width: 150mm; Tape length: 3000mm; Table size: 960mm x 352mm; Additional table: 330mm x 330mm; Veneer grinding device: yes; Oscillation: yes; Swivel grinding unit: yes; Suction connection: 120mm; Motor power: 3 kW; Machine length: 1900mm; Machine width: 810mm; Weight: 290kg; Heavy-duty machine stand guarantees high torsional rigidity and vibration-free workingBetter sanding results due to sanding belt oscillation via separate geared motoroscillation optionally switchableveneer edge sanding device with fine adjustment as standardGrooved infeed ruler for sanding veneer protrusionsQuick changeover from veneer to solid wood pulpHeight-adjustable sanding table for the utilization of the entire sanding belt widthHeight adjustment of the sanding table and sanding unit swivel via handwheelsHeight-adjustable additional table with suction for grinding radiiOptimum chip removal by ...

Band width: 150mm; Tape length: 3000mm; Table size: 960mm x 352mm; Additional table: 330mm x 330mm; Abrasive roller diameter: 60mm/100mm/120mm; Veneer grinding device: yes; Oscillation: yes; Swivel grinding unit: yes; Suction connection: 120mm; Motor power: 3 kW; Machine length: 1900mm; Machine width: 900mm; Weight: 310kg; Grinding unit can be swivelled up to 45Â via leverThe machine stand made of welded steel guarantees high torsional rigidity and vibration-free working.Oscillating sanding belt with separate geared motor for better sanding resultsoscillation optionally switchableAbrasive sole with graphite coating for a longer service life of the sanding beltHeight-adjustable sanding table for utilising the entire abrasive belt widthHeight-adjustable additional table with suction for grinding radiiThe spring-loaded belt tension automatically compensates for belt length di ...

Band width: 150mm; Band length: 2270mm; Veneer grinding device: no; Oscillation: yes; Roll diameter: 38mm, 50mm, 76mm; Swivel grinding unit: yes / 90Â - 0Â; Work table: 680mm x 310mm; Additional table: 260 x 260 mm; Belt speed : 16 m/sec. m/sec.; Suction port: 100mm x 2; Motor power: 1.5kW/400V; Machine length: 1350 mm; Machine width: 585 mm; Weight: 162 kg; Infinitely angle-adjustable sanding unit (0 - 90Â) for vertical and horizontal sandingOscillating sanding belt for better sanding results and a longer service life of the sanding beltQuick and easy sanding belt change via quick-clamping systemabrasive sole with graphite coating as standard for a longer service life of the sanding beltHeight-adjustable robust work table made of grey cast iron with T-slot, supported by spring bearingSmooth adjustment of the table height by means of gas pressure springsIncl. lateral sa ...

Band width: 200mm; Tape length: 3000mm; Table size: 960mm x 352mm; Additional table: 330mm x 330mm; Veneer grinding device: yes; Oscillation: yes; Swivel grinding unit: yes; Suction connection: 120mm; Motor power: 3 kW; Machine length: 1900mm; Machine width: 900mm; Weight: 310kg; Grinding unit can be swivelled up to 45Â via leverThe machine stand made of welded steel guarantees high torsional rigidity and vibration-free working.Oscillating sanding belt with separate geared motor for better sanding resultsoscillation optionally switchableAbrasive sole with graphite coating for a longer service life of the sanding beltHeight-adjustable sanding table for utilising the entire abrasive belt widthHeight-adjustable additional table with suction for grinding radiiThe spring-loaded belt tension automatically compensates for belt length differences.With double suctionExtendable rolle ...

grinding length: 1500 mmgrinding width: 900 mmworkpiece height: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

STEMAS LEV PA9050 grinding machine - serial number 9050R 35599, - consists of: 1 aggregate, 1 grinding group with 2 aggregates, 1 ball Ø250 mm, 1 table with balls - width 550 x 5000 mm, - belt width 80 mm - dimensions in mm: approx. 5100 x 2100 x 2000, - weight in kg: approx. 1500, - year of construction: 1999

Long belt sander Motor 4 kW Professional machine, runs perfectly, in good condition, ready for operation Sold due to lack of space Transportation by buyer Subject to changes, errors and prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

Manufacturer: Bürkle doppelseitige Struktur und Reinigungsbürste, Type: CGM 800, Year: 1984, Control: no, Monting of the machine: 2 X Anderlon 250 mm<CRLF>2 X Fibre, Number of units: 4, Engine power - kW: ca.7,5 über Getriebe Anderlonbürsten<CRLF>2 X 2,2 Kw Reinigungsbürsten, Diameter of brushes: 250 mm / 150, Number of rotations controlled: Struckturbürste, Working width mm: 950, Through running hight mm: 120, Struckturieraggregat: 2, Feeding speed continous adjustable: über Umrichter möglich, Year :1984

Manufacturer: Heesemann, Type: MFA 6 Impression, Year: 2008, Control: Längs/Stahlwalze/ Bürste, Monting of the machine: 1300, Double sided sanding line: 3 - 140, Sanding width mm: 1, Sanding hight mm: 2620 x 1350, Number of sanding belts: 0,5 - 12, Konstantentisch: Konstatntentisch, Bürstenaggregate: CSD , Rubber roller: 16, Band 1 Leistung kW : 15, Konstantentisch: Konstatntentisch, Band 2 Leistung kW : 5 - 25, Belt 2 shoe unit: 3, Band 2 Queraggregat: yes, Band 2 Schleifbandgeschwindigkeit m/s : yes, Band 3 Kombiaggregat: yes, Band 3 Schleifbandgeschwindigkeit m/s : 1,5 kW, Year :2008

Manufacturer: Fladder, Type: Gyro 300, Year: 2006, Control: Programm, Number of units: 1, Working widht mm: 1300, Through running hight max mm: 120, Diameter of brushes: 320, Number of rotations controlled: yes, Units mounted upright: 4, Cross-brushing unit: yes, Through running hight max mm: 120, Vacuum belt: yes, Feeding speed continous adjustable: yes, Workpiece clamping technology: Vakuum, Year :2006

Manufacturer: Weber KSV 1350 4, Type: KLE 1300, Year: 2008, Control: Weber, Monting of the machine: Quer/längs/Quer/Quer/Bürste, Sanding width mm: 1300, Sanding hight mm: 150, Number of sanding belts: 5, Sanding belt dimensions: 1370 X 2620/5100 X 150, Konstantentisch: yes, Elektronische Tastung mm: yes, Separation of sampling in mm: 32, Transverse sanding units: 3, Längsschleifaggregate: 1, Bürstenaggregate: 1, Rubber roller: no, Bürstenaggregate: 1, Band 1 Leistung kW : 15, Belt 1 shoe unit: yes, Band 1 Schleifbandgeschwindigkeit m/s : 2-20 frequenzgegelt, Band 2 Leistung kW : 21, Belt 2 shoe unit: CBF Aggregat, Band 2 Schleifbandgeschwindigkeit m/s : 2-20 frequenzgegelt, Band 3 Leistung kW : 15, Band 3 Schuhaggregat: yes, Band 3 Queraggregat: yes, Band 3 Schleifbandgeschwindigkeit m/s : 2-20 frequenzgegelt, Band 4 Leistung kW : 15, Band 4 Queraggregat: yes, Band 4 Schleifbandges ...