retificadoras usadas para venda

– Italian production – transverse aggregate, the so-called sergeant – year of manufacture 2011 – electric and pneumatic ionizer TECHNICAL PARAMETERS: grinding width 1350 mm grinding height 4-170 mm minimum element length 365 mm vacuum table 1 unit: transverse tape, the so-called sergeant engine power 12 kW 2 aggregate: rubber shaft hardness 95 shore diameter 240 mm engine power 18.5 kW 3 aggregate: rubber shaft hardness 55 shore shaft diameter 300 mm engine power 15 kW 4 aggregate: pneumatic shoe engine power 15 kW 5 unit – cleaning brush 2.2 kW 6 aggregate – blowing blowing on the tape pneumatic oscillation feed speed 2,5 - 18 m/min pneumatic tape tension electric height adjustment connection diameter 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm transport dimensions (L/W/H) 370 / 250 / 250 cm wei ...

– Italian production –Ce – automatic table positioning – year of production 1999 TECHNICAL PARAMETERS: grinding width 900 mm grinding height 165 mm 2 steel shafts pneumatic oscillation electric height adjustment two types of feed speed engine power 11 kW minimum element length 300 mm connection diameter 2 x 160 mm dimensions of the machine (L/W/H) 150 / 115 / 200 cm weight 700 kg

– after technical inspection TECHNICAL PARAMETERS: .max. workpiece width 110 cm .max. workpiece height 16 cm 2 aggregates: 1) AGGREGATE RUBBER roller 2) aggregate with combo boot with pneumatic pressure rollers, rubber, pressure between aggregates oscillation of pneumatic tapes automatic belt centering system potentiometer for setting the planing thickness FEED SPEED SMOOTHLY ADJUSTABLE power of the first unit 18,5 kW power of the second unit 11 kW working pressure 6-8 bar extraction connection diameter 2 x 250 mm dimensions (L/W/H) 195 / 185 / 215 cm weight 1750 kg

– after technical inspection – very good condition TECHNICAL PARAMETERS: maximum grinding width 1100 mm maximum element height 160 mm minimum grinding height 3 mm main engines 2 x 11 kW feed motor 2,2 kW height adjustment motors 0,37 kW 1 65 shore rubber shaft with a diameter of 270 mm 2 45 shore rubber shaft with a diameter of 400 mm belt size 2600 x 1050 mm two types of feed speed pneumatic oscillation at the ends connection diameter 2 x 150 mm tape in very good condition dimensions (L/W/H) 280 / 180 / 250 cm weight ~ 2600 kg

usable grinding wheel outer Ø: 600 mm Table size: 470 x 950 mm Table tiltable down/up to: 45/30° Table height above corridor: 950 mm Grinding wheel speed: 940 rpm Grinding wheel drive: 380 V, 940/1140 rpm, 2.2/2.5 kW Weight: 237 kg  ... mais informação

Working Length: 3100 or 4100  ... mais informação

I sell a bus machine Prochera DSB. Year of construction 2005. 2-sided spindle fi.30 x max. 220mm. Main motor 1.1 kW. Buerste included. Weight 90 kg. Available the same.  ... mais informação

Edge grinding machine Work table swivel 45° Grinding height 150 mm Table dimensions 1440 x 710 mm 2 speeds for sanding belt 12/24 m/min 37qqrtber Height adjustment 130 mm from the unit  ... mais informação

TECHNICAL DATA LIBRA 35 - 110 Usable working width 1100 mm min. and max. working height 4 ÷ 170 mm Sanding belt width 1115 mm Sanding belt length 1900 mm Motor power 400 V 50 Hz 11 (15) kW (HP) 2 carpet feed speeds 4.5/9 m/min Feed motor 0.3/0.55 Elastic link grinding shoe (sector spacing 56) With 20 sectors with adjustable pressure and with 2 contact inserts 1. Semi-hard contact insert made of a flexible steel foil with felt (density 0.68) and graphite coating (suitable for sanding veneered panels and solid wood) 2. Soft contact insert made of a flexible steel foil with rubber and felt (density 0.68) and graphite coating (suitable for grinding veneered or painted panels) Unit R: - with ribbed steel roller ø 120 mm and decimal correction of grain/strip thickness Combi unit TC: - with rubber-coated roller 45 Sh ø 120 mm and decimal correction of grain/strip thickness - H ...

Wide belt sanding machine 3 sanding belts 1370 x 2150 mm 2 Main engines  ... mais informação

Grinding width 1350 mm Material thickness 4-170 mm Sanding belt size 1370 x 2150 mm Feed 4.5 and 9 m/min Main engine 20 HP/15kw V 400/3/50 EU Premium Package Y: - on/off calibration roller 2nd unit from the control panel - on/off grinding roller 2nd unit from the control panel - split pneumatic sanding shoe (segment width 56) - Control FOX 500 KRT - Automatic electronic positioning control - Automatic carpet centering - Table extension with 2 rollers for input and output - CE version - Machine in orig. scm packaging

Ce execution V. 400/50 Electronic table positioning Automatic carpet centering Grinding width 950 mm Combi unit Table extension rear and front  ... mais informação

TECHNICAL DATA LIBRA 35 - 110 Usable working width 1100 mm min. and max. working height 4 ÷ 170 mm Sanding belt width 1115 mm Sanding belt length 1900 mm Motor power 400 V 50 Hz 11 (15) kW (HP) 2 carpet feed speeds 4.5/9 m/min Feed motor 0.3/0.55 Combi unit TC with: - with ribbed steel roller ø 120 mm and decimal correction of grain/strip thickness - Hard sanding shoe (density 0.68) with graphite coating and decimal correction of grain/strip thickness - Switching the sanding shoe on and off from the control panel via pneumatic cylinders. Decimal setting position sanding shoe the grain size/strip thickness - AUTOMATIC CARPET CENTERING

A) Total grinding units: 02 - longitudinal - bottom Grinding units total: 02 - transverse - top - bottom B) Total grinding units: 02 oscillating - right C) Total grinding units: 02 oscillating - links D) Orbital grinding unit total: 02 Complete loading  ... mais informação

Used long belt sander Int. Art. Ref. m3501 Manufacturer: Bütfering Type Table size approx. 2,400x800mm Location: 59425 Unna The machine is welcome to be visited. The machine is currently not energized ! A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at traders, traders and legal entities.  ...

Disc grinding machine Grinding machine for plates, bowls, rings, wheels, etc. Manufacturer: Hempel Model No.: PQ-4 Year of construction: 1982  ... mais informação

Small compact brushing machine for companies that are just starting brushing or are looking for a compact machine for processing heavy wood Specifications: Working width 400mm Working height n.a. (or limited by the height of the feed) 2 working heads 3 kW (4kw optional). Suitable for brushes dia.250mm, L 400mm, d40mm. Brush from below, without feed is possible to work manually. Made in Slovakia, EU. Parameters adjustable on request. The price is without feeder and without tools

Small 4-side brushing/grinding machine for small parts. Minimum part length 250 m ! SPECIFICATIONS: Feed belt speed: 3-20 m/min. Spindle diameter: ø 40 mm Length of horizontal spindle shaft: 150 mm Length of vertical spindle shaft: 100 mm Maximum brush diameter: ø 200 mm Spindle speed as standard: 1000 ot/min (possibility of infinitely variable control) Power of the main motors as standard: 4x1.1 kW Power of the motor for the feed of the conveyor belt: 0.55 kW Diameter of the suction nozzle: 2 x ø 120 mm Maximum material height: 100 mm Maximum material width: 150 mm Minimum length: 250 mm (must be advised) Weight of the machine: 450 kg Compact machine with quick adjustment and optional parameters. KuSING has been manufacturing woodworking machines since 1991. In the field of 4-sided brushes, we offer a wide range of machines for every application. Parameter chang ...

New brush machine K2L-400+ with manual stroke control. The stroke of both spindles simultaneously with the adjustment of the individual spindles to each other. Suitable solution for rapid material height changes. Technical parameters Working width 400mm 2 working heads 2 x3 kW Feed speed 2-12 m/min. Suitable for brushes with a diameter of 250mm, L 400mm, d40mm. The machine is in stock and can be picked up immediately.

New KUSING four-sided brush / grinding machine made in Europe. Compact machine with quick adjustment and optional parameters. Technical parameters: Maximum material width: 250 mm Maximum material height: 150 mm Horizontal motor power: 1.5 kW Vertical motor power : 1.1 kW Diameter of the shaft : 40 mm Tool diameter : 200 / 250 mm Minimum possible material length : 250 mm Possible machine versions with 3 spindles KuSING has been manufacturing woodworking machines since 1991. In the field of 4-sided brushing, we offer a wide range of manufactured machines for every application. Parameter changes possible as required. The advertisement was automatically translated. Translation errors are possible.