retificadoras usadas para venda

Grinding machine Heesemann type MFA 8 Specifications: • Working width (mm): 1300 • CSD system • Transverse grinding unit • Longitudinal grinding unit - shoe • Brush unit • Ionization • Vacuum carpet  ... mais informação

SBF grading machine model 3W-586 1100mm with 3 belts: - 1st roller belt D=150mm in 90 shore rubber - 2nd roller belt D=200mm in 65 shore rubber - 3rd roller belt D=200mm in 45 shore rubber - pneumatic on/off of the 3 rollers, from the control panel - Rubber pressure rollers - automatic table positioner, with digital reader - Feed mat in good condition - 2 belt feed speeds - front and rear roller conveyor - total installed power KW 24 , volt 380 - year 1997 , CE standards AVAILABILITY FROM APRIL 2024

Manufacturer: Heesemann, Type: LSM8 U + LSM8 S, Year: 1997, Control: Heesemann, Monting of the machine: L / L / L , Equipment of machine 2: L / L / L, Double sided sanding line: yes, Sanding width mm: 1350, Sanding hight mm: 3 - 80, Number of sanding belts: 3 + 3 , Sanding belt dimensions: 2620 x 1350, Rollers: 2 + 2, Steel roller: 2 + 2, Band 1 Leistung kW : 45, Band 1 Schleifbandgeschwindigkeit m/s : 24, Band 2 Leistung kW : 37, Band 2 Schleifbandgeschwindigkeit m/s : 24, Band 3 Leistung kW : 13/17, Band 3 Schleifbandgeschwindigkeit m/s : 10/20, Continous adjustable feeding speed m/min: 3 - 15, Transportbandantrieb kW: 4 + 3, Abrasive belts at bottom: 3, Intermediate sanding of lacquer: no, Vacuum table: 15 / 5,5, Noise enclosure: yes, Brushing unit: yes, wast cleaning: 0,75 kW, Weight in kg: 11000+9000, Year :1997

Manufacturer: Tagliabue, Type: L 600, Year: 1998, Monting of the machine: Walze/Walze, Sanding width mm: 600, Sanding hight mm: 0,5-30, Number of sanding belts: 2, Continous adjustable feeding speed m/min: 5-20, Feeding engine kw: ca.2, Sanding belt dimensions: ca.2620 X 630, Sanding belt speed m/sec: 2 Stufig, Power belt 1 in kW: ca12, Performance in kW belt 2: ca.12, Constant table hight: yes, machine ready for demonstration: yes, Year :1998

Manufacturer: Venyeskob, Type: Bürstenschleifmaschine, Year: 1998, Number of units: 3, Working widht mm: 40-300, Through running hight max mm: 80, Diameter of brushes: 150, Number of rotations controlled: yes, Units mounted upright: 1, Units mounted inclined: 2, Through running hight max mm: 80, Feeding speed continous adjustable: 10-30, Exhaust diameter mm: 120, Year :1998

Edge sanding belt KS10: Yes; Chamfer and radius milling unit: Yes; Profile Grinding Wheel Unit: Yes; Machine Length: Machine Width: Weight: 800kg; ... mais informação

Power: 3 kW  ... mais informação

Grinding units Grinding belt length mm: 8000 Grinding width mm: 120 Feed max: 2200 m/min Manipulation unit Max machining range mm: 2100x650x400 Total connection kW: 7.2  ... mais informação

Description: • Varnish Wide belt sanding machine • Serial number SA/003641 • Total installed power approx. 23 KW • Sanding width 1100 mm • Workpiece thickness up to approx. 170 mm • Motorized height positioning with digital reader • Vacuum transport belt, F.LLI FERRARI vacuum unit with motor power 4 KW • Feed motor power 1.50 KW • Aggregate 1: grooved rubber sanding roller, with blowers • Aggregate 2: sanding pad, with blowers • Both groups are driven by an 15 KW motorApprox. Onsite Dimension. (l x w x h): 2,000 x 1,850 x 2,450 mm, weight approx.: 2,300 kg

– Italian production –Ce – automatic table positioning – year of production 1999 TECHNICAL PARAMETERS: grinding width 900 mm grinding height 165 mm 2 steel shafts pneumatic oscillation electric height adjustment two types of feed speed engine power 11 kW minimum element length 300 mm connection diameter 2 x 160 mm dimensions of the machine (L/W/H) 150 / 115 / 200 cm weight 700 kg

Technical description: - number of motors up/30kW,25kW/down/30kW,25kW/ - Entrance to the roller table Yes - Roller table output yes - Blowers Yes -adjustable carpet speed 3.6-20 m/min - Digital setpoint display Yes -suction ports 8x260 mm, 2x160 mm -adjustment of the workpiece grinding setting on each aggregate

Manufacturer: Costa, Type: CCC + CCC 1150, Year: 1998, Monting of the machine: obenWalze/Walze/Walze , Equipment of machine 2: untenWalze/Walze/Walze, Double sided sanding line: yes, Sanding width mm: 1150, Sanding hight mm: 120, Number of sanding belts: 6, Sanding belt dimensions: 2620 X 1150, Table hight adjustment by engine: yes, Rubber roller: 3 +3, Shore roller 1: 70, Shore roller 2: 70, Walze 3 Shorehärte : 60, Längsschleifaggregate: ca.34, Belt 2 shoe unit: ca.22, Belt 2 synchronous and reverse run: ca.17, Belt 3 synchronous and reverse run: 34/22/17, Table hight adjustment by engine: yes, Combi unit roller/shoe: 8-20, Table hight adjustment by engine: ca 3 + 3, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Programmanwahl extern: yes, Pressure pads for short workpieces: 150, Year :1998

Manufacturer: Costa, Type: T 1350, Year: 1998, Monting of the machine: schuh/Bürste, Sanding width mm: 1300, Sanding hight mm: 150, Number of sanding belts: 1, Sanding belt dimensions: 3250 X 1350, Längsschleifaggregate: ca.17, Bürstenaggregate: yes, Band 2 Kombiaggregat Walze/Schuh: 10-20, Belt 4 pressure segment belt: yes, Belt 4 synchronous and reverse run: 32, Elektronische Tastung mm: yes, Table hight adjustment by engine: ca.1,5, Transportbandantrieb kW: yes, Abrasive belts at bottom: yes, Intermediate sanding of lacquer: yes, Programmanwahl extern: yes, Year :1998

Manufacturer: Heesemann , Type: LSM 8, Year: 1998, Control: Heesemann, Sanding width mm: 1300, Sanding hight mm: 1200, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350, Konstantentisch: yes, Elektronische Tastung mm: yes, Separation of sampling in mm: 32, Transverse sanding units: 1, Längsschleifaggregate: 2, Band 1 Leistung kW : 13/17, Belt 1 shoe unit: Queraggregat, Band 1 Schleifbandgeschwindigkeit m/s : regelbar, Band 2 Leistung kW : 13/17, Band 2 Schleifbandgeschwindigkeit m/s : regelbar, Band 3 Leistung kW : 13/17, Band 3 Schleifbandgeschwindigkeit m/s : regelbar, Transportbandantrieb kW: ca.4, Intermediate sanding of lacquer: yes, Vacuum table: yes, Segment sanding shoe: yes, Werkstück-Abstrahleinrichtung: yes, Ionising: yes, Year :1998

Manufacturer: Heesemann , Type: LSM 8, Year: ca. 1998, Monting of the machine: Quer/lang/Scotch/Bürste/Entstaubung, Sanding hight mm: 3-80, Number of sanding belts: 2, Sanding belt dimensions: 2620 x 1350/5400 x 1400, Band 1Schleifbandgeschwindigkeit m/sec: 0,3-12, Band 2 Schleifbandgeschwindigkeit m/sec: 0,3-12, Table hight adjustment by engine: yes, Cross sanding unit: 1, Shoe unit: 1, Elektronische Tastung mm: 16, Frequency control of belts: 2, Power belt 1 in kW: 11, Performance in kW belt 2: 11, Table hight adjustment by engine: yes, Continous adjustable feeding speed m/min: 1,6-9, Feeding engine kw: 1,5, Constant table hight: yes, Vacuum table: yes, Segment sanding shoe: yes, Maschine vorführbereit: yes, Voführung möglich: yes, FREE TEXT: 1 zusätzliche Scotch Bürste 4 Kw, Year :1998

Manufacturer: Heesemann, Type: LSM 8, Year: 1998, Control: neu 2017, Monting of the machine: Q / L / L/ B, Sanding width mm: 1350, Sanding hight mm: 3 - 80, Number of sanding belts: 3, Sanding belt dimensions: 5.400x150 2.620x1.350, Table hight adjustment by engine: no, Transverse sanding units: 1, Längsschleifaggregate: 2, Band 1 Leistung kW : 13 / 17, Band 1 Schleifbandgeschwindigkeit m/s : 12 / 24, Belt 2 shoe unit: yes, Band 2 Leistung kW : 16,5 / 21, Band 2 Schleifbandgeschwindigkeit m/s : 10 / 20, Band 3 Leistung kW : 16,5 / 21, Band 3 Schleifbandgeschwindigkeit m/s : 10 / 20, Elektronische Tastung mm: 16, Frequency control of belts: no, Table hight adjustment by engine: no, Continous adjustable feeding speed m/min: 5 - 25, Transportbandantrieb kW: 4,0, Intermediate sanding of lacquer: no, Constant table hight: yes, Vacuum table: 7,5 kW, Brushing unit: 150 mm, wast cleaning: EA ...

Manufacturer: Sorbini, Type: VS/32-BT-S 2000, Year: 1999, Number of units: 2, Working widht mm: 1350, Through running hight max mm: 80, Diameter of brushes: 150, Number of rotations controlled: yes, Units mounted upright: yes, Through running hight max mm: 80, Axle-diameter: 60, Engine power - kW: 1,5, Required space L x W x H mm: 2500 X 1200 X 1600, Type of use: Reinigen oberflächen, Year :1999

Manufacturer: Venyeskob Bürstenschleifmaschine, Type: VBS 1300, Year: 1999, Monting of the machine: 3 Bürstenaggregate<CRLF>1 Enststaubung, Number of units: 4, Working widht mm: 1300, Through running hight max mm: 100, Diameter of brushes: 350, Number of rotations controlled: yes, Units mounted upright: yes, Through running hight max mm: 100, kW output motor: 4,0, Vacuum belt: yes, Feeding speed continous adjustable: 1,5-7,5, Dust removal brush: yes, Weight approx. kg: 2500, FREE TEXT: mit Flextrim Bürsten, Year :1999

Description: Rehnen Special edge sander Brand: Rehnen Type: SK-1 M-No.: 432 Year of construction: 1999 General specifications: Sanding belt: 2,700 x 150 mm Drive motor: 4 kW Belt speed: 15 m/sec. Table dimensions: 345 x 2,000 mm Dimensions: 3,000 x 2,000 x 1,500 mm Weight: 560 kg Description: Stable universal edge sander for straight, round and curved workpieces Areas of application: radius, shaped parts and straight workpieces Radius sanding with 80 - 300 mm sanding rolls Curved workpieces (allowing R=80 mm to R=1000 mm sanding) for almost all straight and curved workpieces Use of the entire sanding belt by adjustable oscillation Solid work table with integrated dust extractionserial number: 432, Approx. Onsite Dimension. (l x w x h): 2,000 x 1,200 x 1,400 mm, weight approx.: 250 kg

Technical data: Anti vibration welded steel construction Continuous Kettennantrieb 86 mm wide, chain parts made of steel and plastic, self-lubricating bearings, shift on prismatic Guide Adjustable belt speed 5-25 m / min Minimum height work table 870 mm (adjustable) The top pressure unit with adjustable Ã? rubber wheels 60 mm ball bearing Lateral pressure unit with rubber wheels Ã? 40 mm ball bearing Working height min / max 10/100 mm Minimum length 50 mm Minimum width of 30 mm The maximum width 200 mm Feed motor power 3 kW 1 milling unit kW / 2,4 2800 RPM 4 grinding machines with oscillating engines of Leistunj per 4 x 1.7 kW 2800ot RPM Total power consumption 12.5 kW Maschinenewicht 3000 kg very good Zistand, factory tested CE