mandriladoras, centros de usinagem usadas para venda

You can call or write to us. We can speak and write German and Russian. You can also send messages in English 5.1.1.  ... mais informação

Description: X-axis working surface: 4400 mm Y-axis working surface: 2100 mm vacuum pump automatic tool change motor power: 12 kW , control system: POWER PC CONTROL PC 85 x-motion: 4,400 mm, y-motion: 2,100 mm, control: POWER PC CONTROL PC 85, Approx. Onsite Dimension. (l x w x h): 6,200 x 2,400 x 1,000 mm, weight approx.: 4,300 kg

Description: main engine power: 3 HP serial number: 6S25 consisting of 5 lower drilling units with 11 + 11 spindles each. Wheelbase 32 mm drilling blocks swivelling from 0 to 90 degrees motor power 3 HP at 2800 rpm each maximum width horizontal drilling 3200 mm minimum width 260 mm 6 vertical pneumatic clamps automatic conveyor group with stop and pneumatic reference squaring device maximum speed 43 m + / min installed power 16,5 kW, 400 V, 50 Hz, 35 amp, 3 phases serial no. 6S25 dimensions in mm: approx. 5000 x 4400 x 2000 , weight in kg: approx. 5000 serial number: 6S25, working width min.: 260 mm, working width max.: 3,200 mm, total power approx: 16.5 kW, Approx. Onsite Dimension. (l x w x h): 5,000 x 4,400 x 2,000 mm, weight approx.: 5,000 kg

PANHANS 116 YOC 1987 Motor power: 1.5 kW Rated current: 3.5 A 2-lever operation max. drilling depth: 130 mm Height adjustment: 135 mm max. slotted hole length: 240 mm Height adjustment via handwheel Dowel pitch: 16 / 22 / 25 / 32 mm Miter ruler (adjustable) Length stop 1 eccentric Workpiece clamping Suction device: Connection 100 mm Table size: 520 x 290 mm Weight: 220 kg Dimensions (approx. dimensions): W: 90 cm D: 125 cm H: 115 cm

Description: Maximum workpiece size: 600 mm . Table depth: 320 mm Spindle Quantity: No. 35Approx. Onsite Dimension. (l x w x h): 1,500 x 1,200 x 1,500 mm, weight approx.: 700 kg ... mais informação

Description: Machine with possible inclination up to 45°. Maximum travel along the drilling axis: 75 mm Maximum machinable width: 600 mm , Maximum stroke in depth: 165 mm Machine equipped with No. 35 vertical spindles, powered by two ICME electric motors.Approx. Onsite Dimension. (l x w x h): 1,500 x 800 x 1,400 mm, weight approx.: 400 kg

Description: Floor size: 6600 x 1290 mm No. 12-position tool changer. Main spindle with No. 9-tool drilling head. With auxiliary edging head equipped with No. 3 edge slots magazine of adjustable size, size range from: 10mm to 600mm by interchanging the slots. Present two SIEMENS vacuum pumps with NASH ELMO fans.  , Y-axis travel: 1750mm Z-axis travel: 250 mm X-axis travel: 6000 mm  , Control: OMATIC  ,Approx. Onsite Dimension. (l x w x h): 8,000 x 4,000 x 2,450 mm, weight approx.: 5,000 kg

Description: Control voltage on: 35'849 h Main spindle BE1: 23749 h Boring head BE1: 3709 h Drill head: 17 spindles Main spindle: 18.5 kW controlled Chain changer 30-fold HSK F63 Speed range 0-18'000 rpm Drilling head 35 spindles vertical, for automatic changing into the main spindle Control system was converted in 2014: RECHNER IPC 5.11.0.0 WITH DVD, Industrial PC IPC 5.11 from Eltec with Windows XP operating system, hardware: Industrial PC Intel Core 2 Duo E8400 3.0 GHZ, working memory 4 GB RAM, 2 COM interfaces RS232, internal DVD-ROM drive, 1 fixed hard disk with 250 GB, 1 USB hard disk for data backup, 4 USB ports, Ethernet network connection with EC Declaration of Conformity Series no. 0-201-19-1527 without tools or units and without vacuum pump ( central vacuum system ) Translated with DeepL.com (free version)working width y-axis: 1,600 mm, working height z-axis: 950 mm, worki ...

Description: • Multi drilling machine, dowel drilling machine • Drilling head with 27 spindles • Distance between spindles 32 mm • Total distance between first and last spindle 832 mm • Working table dimensions approx. 1070 x 360 mm • Motorized tilting head: 0° - 90° • Motor 1.84 KW-2850 rpm • 3 pneumatic clamps • Actuating by pedalApprox. Onsite Dimension. (l x w x h): 1,250 x 1,000 x 1,300 mm, weight approx.: 500 kg

Description: Powerful CNC machining centre equipped with: 2 pcs. main spindles, each with C-axis one of them with Flex-5 interface, 2 x 11 kW - HSK 63 drilling unit with 25 drilling spindles and groove saw 0/90° 2 pcs. 10-fold tool changers 2 console-tables for pedular processing and 4-fold processing max length of workpiece 3740 mm, while pedular processing 1830 mm, while 4-fold processing 700 mm max width of workpiece 1600 mm for processing with milling tool diameter of 25 mm, 1300 mm for all aggregates stop pin for workpieces with overhang of top layer LED positioning system vacuum loader Homag TBP 370 Traverse length approx. 13 metres Installation height from floor 1300 mm with 8 vacuum cups (130 mm and 100 mm diameter) new vacuum pumps in 2023 for further technical details please have a look at the pdf file (German language)working width y-axis: 1,600 mm, working length x-axis: 3 ...

Description: Three axes, axis travel: X  ,- 3860 mm, Y - 1822 mm, Z1 - 325 mm, Z2 - 185 mm, Operating hours approx. 48'369, work table: X - 3250mm Y - 1250 mm, Z - 125 mm, automatic tool spindle in combination with tool change magazine, tool holder: HSK 63, rotation speed: 1250 - 24,000 rpm infinitely programmable, maximum power at the tool up to 7.5/9 KW, C - axis aggregate interface, automatic tool change magazine with 14 places maximum tool weight 5 kg without units, with CE certificate, Lista drawer cabinet, contents: dowel drills, milling cutters, collets, various tool holders, some with tools, Windows 10 operating systemworking width y-axis: 1,250 mm, working height z-axis: 125 mm, working length x-axis: 3,250 mm, drilling spindles horizontal x-axis: 4 pieces, drilling spindels horizontal y-axis: 2 pieces, drilling spindels vertical x-axis: 9 pieces, drilling spindles vertical  ...

Description: Voltage 380 volts, throat depth approx. 600 mm, two B18 drill heads driven by belts, table support surface approx. 3500 x 800 mm, drawer cabinet with one pull-out, contents: various drill bits, machine without CE certificateApprox. Onsite Dimension. (l x w x h): 3,500 x 1,200 x 1,800 mm, weight approx.: 180 kg

Description: • CNC machining centre (3-axis) • Serial number AL5632 • Total installed power 20 KW • Working area approx. 2600 x 1150 mm • Panel passage height 180 mm • Travelling way X-axis: approx. 3000 mm, Y-axis: 1465 mm, Z-axis: 280 mm • Maximum travel speed in the axes direction x-y-z: 50-40-22.50 m/min • Tool magazine with 10 positions (some elastic nippers are broken) • Electro spindle SCM ISO-30-LD: power 6.60 KW, automatic tool change, for ISO 30 tool holder • Vertical milling group 6.60 KW-max. 12000 rpm, manual tool change • Saw unit to groove in X direction • Vertical drilling spindles in X-axis direction: 9 • Vertical drilling spindles in Y-axis direction: 7 • Horizontal drilling spindles in X-axis direction: 2 + 2 • Automatic lubrication • Remote control panel • 8 consoles with 22 vacuum suction cups total • 4 lifting modules for heavy wo ...

Description: • Hinge drilling and inserting machine • Serial number 249 • Motor 1.10 KW-2820 rpm • Head with 4 spindles • Pneumatic driven, actuating by pedal • Table size approx. 1100 x 400 mmApprox. Onsite Dimension. (l x w x h): 1,100 x 700 x 1,500 mm, weight approx.: 180 kg ... mais informação

Description: • CNC machining centre • Serial number 02030006 • Total installed power approx. 28 KW • Useful working area approx. 3000 x 1300 mm • Panel passage height 110 mm • Travelling way X-axis: 3555 mm, Y-axis: 1735 mm, Z-axis: 270 mm • Maximum travel speed in the axes direction x-y-z: 60-50-18 m/min • Tool magazine with 8 positions •  ,HSD ES919 electrospindle: power 8 KW-max. 24000 rpm, automatic tool change, for ISO 30 tool holder • 0°-90° swiveling saw unit with 1.10 KW motor, saw blade diameter 115 mm • Vertical drilling spindles in X-axis direction: 10 • Vertical drilling spindles in Y-axis direction: 10 • Horizontal drilling spindles in X-axis direction: 2 + 2 • Horizontal drilling spindles in Y-axis direction: 1 + 1 • Saw unit to groove in X direction • CN 12 numerical control on PC • 6 consoles with approx. 35 vacuum suction cups in t ...

Description: • Throughfeed CNC drilling machine, CNC boring machine • Serial number 6086 • Total installed power approx. 16 KW • Maximum workpiece size approx. 3000 x 800 x 35 mm • Minimum workpiece size approx. 280 x 110 x 15 mm • Drilling head vertical X-axis: 7 • Drilling head vertical Y-axis: 7 • Drilling head horizontal X-axis: 1 + 1 • Drilling head horizontal Y-axis: 1 • TPA CNC 90 control • Input roller conveyor with approx. length 1850 mm • Output roller conveyor with approx. length 1850 mmApprox. Onsite Dimension. (l x w x h): 4,500 x 1,900 x 2,000 mm, weight approx.: 2,200 kg

Description: • CNC machining centre • Serial number 0-250-06-1632 • Total installed power approx. 18 KW • Useful working area approx. 2750 x 1000 mm • Travelling way X-axis: 3455 mm, Y-axis: 1480 mm, Z-axis: 260 mm • Maximum travel speed in the axes direction x-y-z: 80-60-20 m/min • Tool magazine with 8 positions •  ,Electrospindle: power 7.50 KW-max. 24000 rpm, automatic tool change, for HSK F63 tool holder, liquid cooled • Milling / saw group with 1.50 KW motor • Saw unit to groove • Vertical drilling spindles in X-axis direction: 11 • Vertical drilling spindles in Y-axis direction: 8 • Horizontal drilling spindles in X-axis direction: 3 + 3 • NUM 1040 numerical control • Software Windows 95 / HOMAG WOODWOP • 6 consoles with 2 vacuum suction cups each • 6 lifting modules for heavy workpieces • BECKER KVT 3.100 vacuum pump with capacity 100 m³/hA ...

Description: • 4-axis CNC machining centre • Serial number 521/0-511 5004757 • Total installed power approx. 18 KW • Useful working area approx. 2600 x 1150 mm • Maximum workpiece thickness approx. 100 mm • Maximum travel speed in the axes direction x-y-z-c: 75-75-30-60 m/min • C-Axis • Tool magazine with 6 positions •  ,OMLAT electrospindle: power 6 KW-max. 18000 rpm, automatic tool change, for HSK F63 tool holder • Swiveling saw unit with 1.50 KW motor • Vertical drilling spindles in X-axis direction: 10 • Vertical drilling spindles in Y-axis direction: 5 • Horizontal drilling spindles in X-axis direction: 2 + 2 • Horizontal drilling spindles in Y-axis direction: 1 + 1 • SIEMENS SINUMERIK numerical control • Remote control panel • 6 consoles with 14 vacuum suction in total • 4 lifting modules for heavy workpieces • NASH_ELMO 2BL2041-2AH50-4A-Z  ...

Description: • 4-axis CNC machining centre • Serial number 471/0-502 5001956 • Total installed power approx. 18 KW • Useful working area approx. 2600 x 1150 mm • Maximum workpiece thickness approx. 100 mm • Maximum travel speed in the axes direction x-y-z-c: 75-75-30-60 m/min • C-Axis • Tool magazine with 12 positions •  ,Electrospindle: power 6 KW-max. 18000 rpm, automatic tool change, for HSK F63 tool holder • Swiveling saw unit with 1.50 KW motor • Vertical drilling spindles in X-axis direction: 10 • Vertical drilling spindles in Y-axis direction: 5 • Horizontal drilling spindles in X-axis direction: 2 + 2 • Horizontal drilling spindles in Y-axis direction: 1 + 1 • SIEMENS SINUMERIK numerical control • Remote control panel • 6 consoles with 14 vacuum suction in total • 6 lifting modules for heavy workpieces • BECKER HOLZHER VP100 vacuum pumpAp ...

Description: • CNC machining centre • Serial number AL5132 • Total installed power 20 KW • Useful working area approx. 2700 x 1000 mm • Maximum travel speed in the axes direction x-y-z: 50-45-22.50 m/min • , 2 x vertical milling unit with manual tool change • Saw unit to groove • Vertical drilling spindles in X-axis direction: 6 • Vertical drilling spindles in Y-axis direction: 5 • Horizontal drilling spindles in X-axis direction: 1 + 1 • Horizontal drilling spindles in Y-axis direction: 1 + 1 • NUM numerical control • Remote control panel • 6 consoles with 2 vacuum suction cups each • BECKER KVT 3.100 vacuum pump with capacity 100 m³/hApprox. Onsite Dimension. (l x w x h): 5,500 x 2,800 x 2,500 mm, weight approx.: 2,900 kg