mandriladoras, centros de usinagem usadas para venda

Number of spindles: 9; Drill bit: 32mm; Power consumption: 2.2kW; ... mais informação

Manufacturer: Koch, Type: Compact, Year: 1991, Control: Programm, Working widht max mm: 150-2500, Arbeitstiefe max mm: 200, Working thickness max mm: 80, Schwenkbereich Grad in X: +30-90, Dovel units: 3, Dovel diameter mm: 10-12, Drill gearings: 2, Drill gearings: 2, Drill gearings: 2, Drill spindles per support: 5, Gluing: yes, Dovel insertion: yes, Raster 32 mm: yes, Compressed air bar: 6, Wight approx. kg: 3000, Year :1991

Manufacturer: Koch Säge Bohr und Dübelanlage, Type: SBD-30-A, Year: 1991, Control: Koch, Work piece width min-max mm: 30 - 130, Min.-max. workpiece length in mm: 300 - 2500, Min.-max. workpiece height in mm: 20 - 40, Saw diameter mm: 300, Drilling gearbox number horizontal: 2, Re-charging: yes, Dovel insertion: yes 10-12 mm, Workpiece magazine: yes, Work piece refeeding: yes, Glue monitoring: yes, Drill spindle pitch mm: 17/22/30/35, Year :1991

Double-sided fully automatic hydraulic cutting - milling - drilling machine PADE NST double-sided fully automatic hydraulic cutting - milling - drilling machine Production of chairs, tables, frames, and furniture parts Max work length 2100 mm Tilt-10° â +45° Rotation-10° â +50° 2 saw blades diameter 400 mm 2 drilling heads left, right can be rotated through 360 °, 8 spindle cross-shaped grid M2fi2 2 additional horizontal drilling heads from behind can be rotated by 360 °, 8 spindle cross-shaped grid 2 milling spindles bore wave 30 mm 1 motor for longitudinal adjustment of 1.5 kW 2 Saegemotore 2.2 kW 4 boring Motors 2.2 kW

Manufacturer: Koch , Type: BLG, Year: 1992, Control: hand, Program-controlled: yes, Software: 300, Work piece width min-max mm: 200-2500, Min.-max. workpiece length in mm: 10-60, Program: yes, Lochraster: alle 2, Drilling engine kW: 60/80, Working range max mm: 2 von hinten, Drilling supprt from bottom: 2, Drill supports from behind: 7, Work piece refeeding: yes, Taktleitung min: 1, Dovel insertion: yes, Overhauled on: alle Bohrgetriebe drehbar 360 Grad, Year :1992

Manufacturer: Weeke, Type: BST 50, Year: 1992, Program-controlled: yes, Work piece width min-max mm: 100-1050, Min.-max. workpiece length in mm: 350-2600, Min.-max. workpiece height in mm: 10-60, Lochraster: 32, Drilling engine kW: 1,2, Working range max mm: 60, Drilling support horizontal: 2, Drilling supprt from bottom: 6, Drill support from top: keine, FREE TEXT: inkl Bohrhetriebe, Year :1992

Dowel drilling and drive-in machine Biesse type F/S Technical data: • Drill head: 21 spindles • Glue guns: 6  ... mais informação

Manufacturer: Böllhoff Laufschienenschraubautomat, Type: NC/A1/NC-VS-LS, Year: 1992, Steuerung : Programm, Working range X: 2000, Working range Y-axis: 600, Number of milling spindles: Schraubaggregat, Number of tools per tool-magazine: Stangenmagazin, Working widht max mm: 2000, Arbeitstiefe max mm: 600, Auslegermaschine : yes, Beschlagzuführung über Stangemagazin, Year :1992

Manufacturer: KOCH, Type: DL 60, Year: ca.1992, Control: umgerüstet auf elektronische Leimventile, Work bays: 1, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 40, Min.-max. workpiece height in mm: 2800, Work piece depth mm: 800, Work piece width min-max mm: 60, Feeding speed m/min: ca.40, Centre support: no, Beleimwerkzeuge: 6, Dovel insertion: yes, Dovel diameter mm: 8, Work piece clamping: pneumatisch, Low-pressure gluing system: 2, Year :ca.1992

number of spindels, row holes: 18; number of spindels horizontal: 3; Pot hinge boring head: Grass; drill distance: 32mm; power consumption: 2,2kW; drilling unit: tiltable;  ... mais informação

Fitting drilling machine Grass BBM-R with substructure with stop L x W x H: 2.5 x 1.0 x 1.8 m Weight approx. 350 kg Year of construction 1992 The machine is in very good condition, ready for operation, Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 fax 0041 62 966 21 12

Manufacturer: Jago Lochreihenbohrmaschine, Type: B29PN, Year: 1992, Control: hand, Drilling engine kW: ca.1,5, Working range max mm: 60, Drilling support horizontal: 1, Drilling beams: 1, Drilling beam swivel-mounted: yes, Number of drill spindles: ca.27, Lochraster: 32, Swivel pneumatically 90-45°: hand, Foot switch: yes, Max. drilling depth in mm: 60, Year :1992

Frame and slotted hole drilling machine with pneumatic height adjustment and pneumatic feed Double-hole drilling on two levels in one clamping operation Motor power 2.2 kW With two-jaw chuck 1 - 20mm Pneumatic adjustment of the processing height, dowels on two levels without moving. Transverse adjustment approx. 280mm, infinitely variable or in 18/20/22/25mm increments Drilling stroke approx. 120mm Pneumatic drill feed can be controlled via foot pedal, spinning possible 2 pneumatic workpiece clamps Grid rail for quick adjustment laterally in the grid Stop for longitudinal adjustment during slotted hole milling Suction connection 80mm A few paint spots dabbed Very good condition, see original photos. Dimensions approx. 1000 x 850 x 1300mm (LxWxH), weight 250kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstrat ...

bore capacity in steel (diameter): 32 mmthroat: 300 mmbore stroke: 150 mmbore capacity in cast iron: 36 mmspindle taper MT: 3 spindle turning speed - stepless: 140 - 1400 U/mintable-size: 500 x 360 mmcolumn diameter: 125 mmtotal power requirement: 1,5 kWweight of the machine ca.: 335 kgdimensions of the machine ca.: 500 x 800 x 1850 mmThe machine comes from a training company and has been maintained more thansecond hand.The general condition is very good, all functions have been checked.Accesories:- Drill chuck- infinitely variable speeds- lightingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 30 mmthroat: 322 mmbore stroke: 165 mmspindle cone MT: 3 table-size: 336 x 535 mmcolumn diameter: 105 mmspeeds: 8: 100- 2400 U/mintotal power requirement: 0,9/0,75 kWweight of the machine ca.: 200 kgdimensions of the machine ca.: 0,6 x 0,7 x 1,75 mElectric 380 Volt: Gear drill with manual feed, 8 speeds, 2-pole motor, right-left rotation, drilling stroke with scale and table height adjustable via crank.Machine dealer with own stock of 1600 m².The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: IMA, Type: Bima 600, Year: 1993, Control: NUM 760, Working range X: 3000, Working range Y-axis: 1200, Working range Z: 250, C axis: no, Number of milling spindles: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: 7,5, rpm 1): 1800-18000, Number of tool magazines: 1, Number of tools per tool-magazine: 8, Vertical drills-X: 5, Stops in the table rear: yes, Number of tables: 1, Traverse table: yes(Rolle), Vacuum pumps Qty: 2 X 80, Tool clamping system: vakuum, Year :1993

I sell an Angular drill with hanging insert suitable for tur production. MARZANI MACCHINE CHEAP WORK Year of construction: 1993 Number of drilling spindle 1 (drill head fully -7 to +90° adjustable) Number of insert heads 1 (magazine suitable for turret hanging) Insert head mechanical, screw insert Very good condition. Available the same.

ORF Universal 5 Spindles  ... mais informação

- for processing hinge systems and connection fittings - Advantages of hole-row drilling in the system 32 - Machine stand with lift - Switching console - Foot pedal - Pneumatic connection (6 - 7 bar, air consumption per stroke 1.2 ltr.) - Blow-off gun incl. hose and T-connection - Drilling gearbox with 19 spindles - pneumatic holders - Press-in die present - Stop ruler - Table profiles - Wooden pad - Suction nozzles (diameter 80 mm) The machine is mounted on a mobile cabinet and can also be delivered with it. The machine is completely cleaned and has been checked for its function. (Changes and errors to technical data and prices reserved!)

Manufacturer: Stegherr, Type: FDE, Year: 1993, Control: Verdübelung von Kämpfer-Setz-<CRLF>hölzern, Sprossen und Türelementen., Program: PC Steuerung, Work piece width min-max mm: 20-150, Min.-max. workpiece length in mm: 400-3300, Min.-max. workpiece height in mm: 10-80, One or two Spot machine: 2, Year :1993