mandriladoras, centros de usinagem usadas para venda

CNC WORKING CENTER type ALBERTI EDIT 3000 composition : 1. boring unit ( axe X and Y ) , vertical nad horizontal independent mandrins 2. vertical router 3. horizontal router CNC 90 by TPA volt. 380/50  ... mais informação

Machine to the dowel, drill and saw the company EKM spezialmaschinen connection value: 4,4 kW 1 pneum. Workpiece clamping system 1 drill head with 5 spindles in row spacing 25 mm / 40 mm / 40 mm / 25 mm 4 piece glue - and plugs Tools 4 piece adjustable on width 220 mm Under table saw Control PLC Siemens Simatic Fully functional replacement for PLC program on CD,. Shipping dimensions: L 1500 mm x W 1500 mm x H 2400 mm Machine weight: 1000 kg Condition good, fully functional

Rung and slotted hole drilling machine T 140 with angle adjustment Special drilling machine for staircase construction, window construction. Oblique dowels and picket holes can be easily realized thanks to the rotatable drilling unit. Motor pole switchable, two speeds Motor power 1.4 / 1.8 kW, 1380 / 2810rpm Starting the engine with a practical handle switch Röhm two-jaw chuck up to 20mm capacity Linear laser for exact positioning of the workpiece Drilling unit can be rotated 63 degrees to the left and right The desired drilling height can be adjusted with a hand crank and digital counter Transverse adjustment approx. 320mm, infinitely variable Maximum height adjustment approx. 60mm above table height Drilling stroke approx. 140mm 2 pneumatic workpiece clamps Chassis Pressure rubbers renewed Few paint spots repaired Dimensions approx. 1180 x 1000 x 1250mm (LxWxH), ...

Manufacturer: Homag, Type: 20/30/12/G, Year: 1994, Control: Homatic NC 81/Woodwop, Work piece width min-max mm: 130-1200, Min.-max. workpiece length in mm: 250-3000, Min.-max. workpiece height in mm: 40, C axis: yes, Work piece width min-max mm: 130-1200, Min.-max. workpiece length in mm: 250-3000, Min.-max. workpiece height in mm: 40, Number of milling spindles: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: 7,5, Anzahl Werkzeugwechsler: 1, Number of tools per tool-magazine: 8, Vertical drills-X: 10, Drill vertical Y: 5, Saw unit: yes, Radial arm machine: yes, inkl.Werkzeuge: yes, Year :1994

Manufacturer: SCM, Type: Routomat 3 , Year: 1994, Control: scm, Work piece width min-max mm: 2500 X 1400, Working range X: 2500, Working range Y-axis: 1400, Working range Z: ca.350, C axis: yes, Work piece width min-max mm: 2500 X 1400, Number of milling spindles: 1, Tool adaption system: ISO 30, Milling engine 1 hours power: 7,5, pm: 1500-18000, pm: 1500-18000, Anzahl Werkzeugwechsler: 1, Number of tools per tool-magazine: 6, Alu-Glättisch: Alu Nuttisch, Tool clamping system: vakuum, FREE TEXT: C-Achse muss überholt werden Preis ca.3000 Euro, Year :1994

Bore diameter: , mmNumber of heads horizontal: , St.Number of heads vertical: , St.Pitch: 1xBohrkopf mmWorking width: 3300 mmBoring depth max.: 80 mmWorkpiece thickness: 150 mmMotor output: 0,5 kWSTEGHERR - Dowel drilling machine type FD/E-------------------------------------for the efficient dowelling of crossbars and slats, rungs andDoor elements. The window and door dowel drilling machine is an extended FDand is equipped with a freely programmable PC control with a floppy disk drive and14 screen equipped. Up to 1000 drilling patterns with 10 holes eachcan be saved and accessed via code numbers. Specially designed for window andSoftware developed by door manufacturers guarantees high cost-effectiveness andextreme precision. Part of this machine is a pre-built STEGHERR-NCSTOP positioning device that positions the workpiece with an accuracy of +/- 1/10 mmin front of the drilling unit. St ...

Description: Serial number AL1950 Documents: use and maintenance manual, programming disketteApprox. Onsite Dimension. (l x w x h): 4,000 x 2,000 x 2,000 mm, weight approx.: 2,500 kg ... mais informação

Manufacturer: Homag, Type: BAZ 20 - 50 -12, Year: 1994, Control: Homatic, Working range X: 6000, Working range Y-axis: 1400, C axis: yes, Number of milling spindles: 1, Tool adaption system: HSK, Milling engine 1 hours power: 12, pm: 1800-24000, pm: 1800-24000, raster table: yes, Vacuum pumps m³/h: 2 X 100, Drill vertical: 14+7, Saw unit: yes, Edgebanding unit: yes, Verleimhöhe max.: 45, Vorbeschichtete Kante: no, Radial arm machine: yes, Year :1994

Manufacturer: Priess und Horstmann Frontenbohrautomat, Type: BAT III, Year: 1994, Control: Priess und Horstmann, Barcode scanner: yes, 3 Achsensteuerung: 3, Working range X: 2 X 1500, Work piece width min-max mm: 190 - 600, Work piece length min-max mm: 100 - 1500, Work piece thickness min-max mm: 10 - 60, Automatic setting up: yes, Drilling supprt from bottom: 7 Spindeln, Drill support from top: yes, Number of milling spindles: 1 , Power kW 2: 2,2, RPM min-max 2: 18000, Sawing unit: 1,6 kW, Line screw running units: yes, Feeding speed max m/min: 60/80/10, Pneumatic clamping: yes, Cycle rate: 400, machine ready for demonstration: yes, FREE TEXT: Maschine ist für Hettich Beschlag/Puffersetzautomat , Year :1994

Manufacturer: Jonsdorf, Type: JBE 10-25, Year: 1994, Control: hand, Work bays: 1, Working length max mm: 800, Dovel diameter mm: 6, Number of doveling tools: 6, Drilling beam swivel-mounted: no, Number of drill spindles: 25, Lochraster: yes, Drilling engine kW: 1,2, Working range max mm: 60, Dovel insertion: yes, Work piece clamping: yes, Work piece support: yes, Work stations: 2, Drilling depth: 50, Drilling hight: 50, Year :1994

Manufacturer: Jonsdorf, Type: JBE 10-25, Year: 1994, Control: hand, Software: 1, Barcode: 800, Min.-max. working length in mm: 6, Min.-max. workpiece thickness in mm: 4, Variable support centre-to-centre distance mm: no, Drilling support horizontal: 25, Drill gearings: yes, Drilling supprt from bottom: 1,2, Drill gearings: 60, Drill gearings: yes, Drilling beam swivel-mounted: yes, Belt infeed: yes, Lochraster: 2, Working range max mm: 50, Part performance max/min: 50, Year :1994

Dowel drilling machine Biesse type Techno Logic Specifications: • Year of construction: 04/1994 • Working width (mm): 3200 • 7 supports from below: with 2 drilling units each • 2 top-down supports: with 2 drill units each • Drilling support: 1 right and 1 left horizontal  ... mais informação

Manufacturer: Priess und Horstmann, Type: BAT III CNC, Year: 1994, Control: Priess und Horstmann, Function: 2, Work piece width min-max mm: Topfband, Min.-max. workpiece length in mm: yes, Min.-max. workpiece height in mm: ca.2 X 1250, Destacking unit: 2600, Einlaufrollengang: 60, Dowel driving station: 19, Fitting type: 2, Schliesszylinder Bohrstationen: 1, Fitting type: 2, Bänderbohrstationen: 1, Fitting type: 2, Hinges inserting unit: 2 X9, Dowel driving station: yes, raster table: 2 Stück Puffersetzeinheiten, Year :1994

Gebr. Pot Belt Drill Rig HETTICH Blue Max mini YOC 1994 0.75 kW 3 spindles with additional drilling unit AYEN 0.73 kW incl. base cabinet Stop ruler 300 cm with stop flaps Sold in ACTUAL condition and unrefurbished from carpentry dissolution. Fixed price.  ... mais informação

• More information: on request  ... mais informação

Manufacturer: Koch, Type: SBD - 320 , Year: 1994, Control: Programm, Working widht max mm: 1500, Arbeitstiefe max mm: 320, Working thickness max mm: 10 - 32, Saw diameter mm: 350, Work piece transport: Kette, Drilling support horizontal: 2, Drill gearings: 7, Drill gearings: 7, Drill support from top: 5, Drill gearings: 7, Belt conveyor: yes, Gluing: yes, Re-charging: no, Dovel insertion: yes, Raster 32 mm: yes, Horizontal drilling from both sides: yes, Wight approx. kg: 6000, Year :1994

Manufacturer: Koch, Type: Compact, Year: 1994, Control: NC, Work piece width min-max mm: 200, Min.-max. workpiece length in mm: 150-2100, Min.-max. workpiece height in mm: 10-80, Saw diameter mm: 400, Drilling support horizontal: 2, Drilling gearbox number horizontal: 2, Drilling supprt from bottom: keine, Drill spindles per support: 5, Drill-beam 90° swivel mounted: yes, Grid 32 mm: 17/22/35/30/124, Year :1994

Slotted hole drilling machine with pneumatic height adjustment Duggle hole drilling on two levels in one clamping Motor power 1.5 kW With Röhm two-jaw chuck 1 - 20mm Pneumatic adjustment of the machining height by foot pedal, dowels on two levels without repositioning. Transverse adjustment approx. 240mm, infinitely variable or in 16/22/25/32mm increments Maximum height adjustment approx. 135mm Drilling stroke approx. 145mm Table size approx. 700 x 380mm pneumatic workpiece clamp Fixed stop and adjustable angle stop from +45 to -45 degrees Grid rail for quick adjustment on the side of the grid Driving equipment Extraction connection Parts repainted Pressure reducer renewed Dimensions approx. 950 x 1200 x 1300mm (LxWxH), weight 320kg. The machine can be demonstrated by appointment at our site. We only offer machines that are ready for demonstration in our warehouse ...

x-travel: 1700 mmy-travel: 400 mmz-travel: 400 mmControl: Siemens 480 D table width: 500 mmtable length: 2000 mmtotal power requirement: 16,25 kWweight of the machine ca.: 4750 kgdimensions of the machine ca.: 3000x 2500x 2800 mMachine number 9599- 4th axis / horizontal / diam. 315 mm- Chip conveyorThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: IMA, Type: Quadroform C 80/280, Year: 1995, Working range X: 2800, Working range Y-axis: 800, Tool adaption system: HSK 63 F, Milling engine 1 hours power: 7,5, rpm 1): 1500-18000, Number of tool changers: 8, Pickup Wechlser: yes, Vertical drills-X: 5, Drill vertical Y: 9, Number of tables: 1, 2 station allocation: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 80, Saw unit: Wechlser, FREE TEXT: inkl Werkzeuge, Year :1995