máquinas de laca usadas para venda

Manufacturer: Hochleistungspumpe für Hochviskose Flüssigkeiten, Type: Siemens, Year: ca.2005, Control: Schaltschrank, Elektr. pump: yes, FREE TEXT: Motorleistung 1,8 kw/50 Hz, Year :ca.2005 ... mais informação

Manufacturer: Wandress, Type: CH 29M/1650<CRLF>BI 99DS/3/1650, Year: 2002, Control: yes, Dust removal brush: yes, Brush type: Riemen, Number of units: 2, kW Leistung Motoren: 0,5, Number of rotations controlled: yes, Units mounted upright: yes, Working width mm: 1700, Through running hight mm: 120, Roll transport: yes, Feeding speed continous adjustable: yes, Feeding speed min-max m/min: 5-20, kW-Vorschub: 0,75, Electrical hight adjustment: yes, rotor jets: no, FREE TEXT: Vorgeschaltete Entstaubung im High Speed channel HSC 50/2/1650/ Arbeitshöhe 1100 mm, Year :2002

Manufacturer: Hymmen, Type: SGC, Year: 1999, Control: Hymmen, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 3-120, Operating side: rechts, Vorschub Transport m/min min - max: 5-25, kW - Leistung Transport: 0,75, Glättewalze mm: yes, Glättewalzengeschwindigkeit: 5-25, Year :1999

 ... mais informação

Manufacturer: Bürkle, Type: UV Lampe, Year: ca 2018, Work piece width min-max mm: 1300, Length mm: 1420, Year :ca 2018 ... mais informação

Manufacturer: Giardina, Type: G02/05, Year: 2008, Control: Giardina, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 3-120, Operating side: links, Working height: 900, Lackauftragseinheiten: 1, Vorschub Transport m/min min - max: 7-20, kW - Leistung Transport: ca.1,2, Auftragswalzengeschwindigkeit m/min min-max: 720, Gummierte Auftragswalze(n): yes, Durchmesser Auftragswalze mm: ca.240, Reverse und Gegenlauf: yes, kW - Leistung Dosierwalze: yes, rbakel: yes, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: band, Pump system: membrane, Carriage: yes, Electronic control board: yes, Strassenbetrieb: möglich, Einbaulänge Auftragsmaschine mm: ca.900, Carriage: yes, Year :2008

Manufacturer: Bürkle Lackersatzwalze 1416 mm 50 shore defekt, Spare roller: SLC/DAL, Bürkle: yes, Roller rubber coating: yes, Rubber coating length cm: 1415, Shore Härte: gummi mus erneuert werden,  ... mais informação

Manufacturer: Venyeskob Spritzmaschine Stone, Type: Venspray, Year: 2011, Control: Venyeskob, Work piece width min-max mm: 10-1000, Working widht max mm: 1000, Working hight mm: 120, Spraying heads - total: 2, V-Band Lackrückgewinnung: no, Walzenwäschersytem: no, Transport system steel belt: Kette, Lackierpistolen: 2, Spraying heads - total: 2, Year :2011

Manufacturer: Cefla, Type: UV 2000 M2/1600, Work piece width min-max mm: 1600, Working widht max mm: 1600, Number of lamps: 2, kW power 1 lamp: ca.12, kW power all lamps: 46,25, Lampen gerade eingebaut: 2, Lampen von unten: no, Adjustable: yes, Power per lamp watt UV: 80-120 unter<CRLF>vorbehalt, od distance mm: 80, Conveyor lenght mm: 3000, Outer belt width mm: 2800, Working hight approx mm: 60, Conveyor: Stange, Exhaust air diameter mm: 2, Working height in mm: +/--950, Feedin speed m/min: 5-15, Rod transportation: yes,

Manufacturer: Purete, Type: PRT-R1113, Year: NEU, Control: Siemens, Program: HMI, Work piece width min-max mm: 1.320, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 2 - 80, Durchlassbreite min-max mm: 1.320, Operating side: rechts, Working height: 880, Lackauftragseinheiten: 1, Vorschub Transport m/min min - max: 5 - 25, kW - Leistung Transport: 1,5, Auftragswalzengeschwindigkeit m/min min-max: 5 - 25, Gummierte Auftragswalze(n): EPDM 40 Shore, Dosierwalzenschwindigkeit m/min min-max: 5 - 25, Gummierung mm: 13, Gummierung mm: 13, Durchmesser Auftragswalze mm: 245, Simple rubber coating: yes, Dosierwalze verchromt: yes, Dosierwalzen Gleich und : yes, Dosierwalzenschwindigkeit m/min min-max: 5 - 25, kW - Leistung Dosierwalze: 0,75, Durchmesser Dosierwalze mm: 180, Widht of roller coater: 1.450, Attachment bracket roller: yes, everse drive: yes, rbakel: yes, Separa ...

Manufacturer: Heesemann , Type: EA 2, Year: ca.1990, Control: hand, Dust removal brush: yes, Brush type: Fibre, Diameter of brushes: 150, Compressed air cleaning: oben und unten, Number of units: 3, Engine power - kW: Druckluftturbine ca. 4, Working width mm: 1300, Through running hight mm: 120, Roll transport: yes, Feeding speed continous adjustable: yes, Ionising: yes, rotor jets: Flachstrahldüse, Year :ca.1990

Manufacturer: Cefla, Type: Rotostain, Year: 2005, Control: yes, Work piece width min-max mm: 10-1350, Min.-max. workpiece length in mm: 150-3500, Min.-max. workpiece height in mm: 10-60, Pistolenantrieb: 16, Feeding speed m/min: 2,5-10, Year :2005 ... mais informação

Manufacturer: Purete, Type: PRT-U1113e, Year: NEU, Work piece width min-max mm: 1320, Min.-max. workpiece length in mm: 300, Min.-max. workpiece height in mm: 2 - 80, Number of lamps: 1, kW power 1 lamp: 17, kW power all lamps: 18, Lampenlänge mm: 1.478, Reflektor von oben abnehmbar: zur Bedienseite, Gesamtlänge UV Modul mm: 1.850, Lamps straight installation: yes, Strahlereinheit UVM: yes, Adjustable: yes, Elektronische Leistungregelung: yes, Automatische Werkstückerkennung : yes, Automatischer Hochlauf der Lampe bei Einlauf Werkstück: yes, Position of lamps: gerade, Abluftmenge cbm/h: 1200, Leistung Abluftventilator kw: 0,5, Tragstangendurchmesser mm: 25, od distance mm: 38, Chain pitch mm: 38, Outer belt width mm: 1.850, Feeding speed m/min: 5 - 25, Conveyor: Stange, Exhaust air diameter mm: 200, Required space L x W x H mm: 1.850 x 1.850 x 1.700, Year :NEU

Manufacturer: Heesemann EA 2, Type: EA 2, Year: 1995, Dust removal brush: yes, Brush type: Fibre, Diameter of brushes: 150, Compressed air cleaning: yes, Number of units: 2, Engine power - kW: 8, Units mounted upright: yes, Working width mm: 1350, Durchlasshöhe mm: 120, Feeding speed continous adjustable: yes, Ionisierung: yes, Wight approx. kg: 1.000, Required space L x W x H mm: 0900 x 2300 x 1500, Year :1995

Manufacturer: Venyeskob, Year: 2007, Control: CNC-6300, Spraying line: yes, Work piece width min-max mm: 10-1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 3-80, Working widht max mm: 1300, Belt conveyor: yes, Brushing machine: no, Dust exhaust (number): yes, work piece cleaning: yes, Spraying machine: Venyeskob, Spraying heads - total: 2, work piece detection: yes, Conveyour system: Band, Spraying stations: 2, Laquer circles: 3, Laquer system - airless: yes, Laquer system - airmix: yes, Lackrückgewinnung über Band: yes, Wäscheranlage: 2, über Band: yes, by rollers: yes, Dry exhauster: yes, Senkrechtrockner 1: Düsentrockner, Dust exhaust (number): yes, UV dryers - 1 lamp (number): 2 Lampen/schräg, Year :2007

 ... mais informação

Manufacturer: Bürkle Lackauftragswalze 1415 mm shore 60 25 mm Gummi , Bürkle: yes, Rubber coating length cm: 1416, Shore Härte: 60, Approx. thickness of rubber coating in mm: 25,  ... mais informação

Manufacturer: Giardina, Type: G02/05, Year: 2008, Control: Giardina, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 3-120, Working height: 900, Lackauftragseinheiten: 1, Vorschub Transport m/min min - max: 7-20, kW - Leistung Transport: 1,0, Durchmesser Auftragswalze mm: ca.240, Reverse und Gegenlauf: yes, everse drive: yes, rbakel: yes, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Pump system: Membrane, Carriage: yes, Strassenbetrieb: möglich, Carriage: yes, Year :2008

Manufacturer: Hymmen, Type: TLX-M1, Year: 1993, Work piece width min-max mm: 1350, Working widht max mm: 1350, Operating side: links, Working height: 980, UV-laquer roller: yes, Attachment bracket roller: yes, Work piece thickness max mm: 80, Feeding speed min/max: 5 - 25, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Machine is overhauled: Maschine wird gereinigt, geprüft und neu lackiert, Year :1993

Manufacturer: Hymmen, Type: TLX - M, Year: 1993, Work piece width min-max mm: 1350, Working widht max mm: 1350, Operating side: links, Working height: 980, UV-laquer roller: yes, Attachment bracket roller: yes, Work piece thickness max mm: 80, Feeding speed min/max: 5 - 25, Roller lift out: yes, Hight adjustment by engine: yes, Type of transportation: Band, Machine is overhauled: Maschine wird gereinigt, geprüft und neu lackiert, Year :1993