máquinas para folheado usadas para venda

Description: Saw blade diameter 81 mm , Voltage 380 V , On wheels , Without additional accessories without CE certificateserial number: 145,768, cutting length: 3,000 mm, Approx. Onsite Dimension. (l x w x h): 3,600 x 1,100 x 1,500 mm, weight approx.: 380 kg ... mais informação

Description: Upright projection 1250 mm, minimum veneer strip length approx 350 mm, minimum veneer strip width approx 45 mm, veneer thickness approx 0.3 to 1.5 mm, feed speed approx 20 to 50 meters per minute, heating zone length 1200 mm, working height 970 mm, total connected load approx 9.3 kVA, drive 2.2 kW, voltage 400 Volt, with CE certificate, additional accessories: support table right, cooling unit, replacement hinge, belt chainApprox. Onsite Dimension. (l x w x h): 4,500 x 2,400 x 1,800 mm, weight approx.: 2,300 kg

Description: Electrical connection 10.5 kW, machine number ,11520, oil hydraulic pressure 130 bar, movable optimizing laser, stop setting range 0 to 25 mm, light barrier and protective grid at the rear, control: ferrocontrol, type: MAG2, electrical connection 10.5 kW, with EC declaration of conformity issued in July 2009, accessories : Spare bladeserial number: 11,520, cutting length: 3,210 mm, Approx. Onsite Dimension. (l x w x h): 5,200 x 1,800 x 2,100 mm, weight approx.: 8,600 kg

Description: Serial number 10039, voltage 380 volts, maximum cutting height 60 mm, maximum cutting length 800 mm, with table support surface left and right, without CE certificate, with spare blade ,cutting length: 800 mm, Approx. Onsite Dimension. (l x w x h): 5,400 x 1,600 x 2,000 mm, weight approx.: 600 kg

Description: Projection: 900 mm Veneer thickness approx. 0.4 - 2 mm, Feed approx. 15 m/min, Drive motor 0.18 kW, total connection 0.5 kW, Space requirement LxWxH 1280mm x 580mm x 1470mm, Weight 166 kg. - NO CE certification! - PRICED IN RECONDITIONED CONDITION - SOLD WITHOUT WARRANTY! Data is taken from the manufacturer's brochure/documents and may differ from the actual values. ATTENTION: It is expressly pointed out that this lot only corresponds to the scope of the lot description. If objects can be seen in the photo that are not expressly listed in the lot description, these are not part of the sale. part of the sale. This naturally also applies to tools, additional equipment, accessories, software, equipment, etc. (in relation to the photo and lot description). ,Approx. Onsite Dimension. (l x w x h): 1,350 x 820 x 1,660 mm, weight approx.: 166 kg

Description: For assembling smooth veneers in the thickness range from approx. 0.4 to approx. 1.5 mm lengthwise. A special PVAc glue and the tried and tested Kuper special glue thread are used as the bonding medium. Kuper special glue thread is used in a super-thin quality (high yield). Min. veneer strip length: approx. 400 mm Veneer strip width: from 40 mm Material feed for butt gluing: approx. 15 m/min. Drive motor 0.55 kW, total connection 2.5 kW Air consumption: approx. 300 NL/min. Space requirement LxWxH 1700mm x 1020mm x 1600mm, Weight approx. 650 kg. SOLD IN FUNCTIONALLY TESTED CONDITION SOLD AS SEEN - WITHOUT WARRANTY ! Known defects: Sliding clutch bearing extremely loud. Heating for white glue defective. Discs for white glue application broken out Data is taken from the manufacturer's brochure/documents and may differ from the actual values. ATTENTION: It is expressly poin ...

Description: Projection: 900 mm Veneer thickness approx. 0.4 - 2 mm, Feed approx. 15 m/min, Drive motor 0.18 kW, Total connection 0.5 kW, Space requirement LxWxH 1280mm x 580mm x 1470mm, Weight 166 kg. SOLD AS SEEN - WITHOUT WARRANTY ! - NO CE certificationApprox. Onsite Dimension. (l x w x h): 1,280 x 5,800 x 1,470 mm, weight approx.: 166 kg

Description: Material: Wood and hard plastic Angle Adjustment: 45° to 90° adjustable Max. Cutting Width: 100 mm Max. Cutting Height: 152 mm Approx. Onsite Dimension. (l x w x h): 400 x 250 x 400 mm, weight approx.: 50 kg ... mais informação

Description: veneer cutter made in Germany after pneumatic fixation cut up to 3000 mm veneer lengthApprox. Onsite Dimension. (l x w x h): 3,750 x 100 x 1,200 mm, weight approx.: 300 kg ... mais informação

Description: SPECIFICATIONS Hydraulic 4-roll plate roller Character: Haeusler Type: VRM 3000/15 Roller length: 3,000 mm Plate thickness: 15 mm Number of rollers: 4 Upper roller diameter: ø350 mm Hydraulic folding Hydraulic lifting Conical rollers 2 Powered rollers Transport dimensions: 7,000 x 2,250 x 2,300 mm Machine weight: 21,000 kgApprox. Onsite Dimension. (l x w x h): 7,000 x 2,250 x 2,300 mm, weight approx.: 21,000 kg

Cutting length: 3200 mmPressure stroke: 100 mm.Rear feed width: 25 - 800 mmPressure beam mechanical2-hand operationLight beam securityMotorised back fence ... mais informação

Cutting length: 2300 mmMax pack height: 80 mm.Hydraulic pressure beam2-hand operationLight beam securityMotorised back fence ... mais informação

For the joining of veneers with thicknesses 0,4 up to approx. 3 mm.The joining medium is a glue impregnated thread which is applied in zig-zag or in a wavy line accross the joints of the veneer sheets by means of a heated thread guideThroat depth: 1150 mmFeed speed, infinitely adjustable: 10 to 30 m/minPower installed: 1,5 kW

Hydr. Glueing machine make JOOS type HPS 20 SMachine -No: 68/3576 built in 1969Table size: 1000 x 1000 mmInstallation height (height of the press room): 1000 mmPressure gauge: 630 barOperating pressure: 300 barPiston diameter: 65 mmNumber of cylinders: 2Stroke: 400 mmDrive power: 1.5 hpDimensions: 1700 x 1100 x 2400 mmWith- Timer- extendable table- Cylinder movement from below- Emergency stop switchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Joining and fine cutting machine / veneer saw make SCHEER type FM 8/3100Machine -No: 72824Technical specifications:Cutting length: 3100 mmCutting height: 45 mmSaw blade diameter: 180 mmFeed: manualPower requirement: 1.8 kWDimensions: 3950 x 470 x 920 mmWeight approx: 400 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools