equipamentos periféricos (por exemplo, aquecimento, refrigeração, secagem) usadas para venda

coolant capacity: 30 l/minCapacity: 70 Wattconveying height: 4 voltage: 400 VSuction depth: 300 mmSubmersible pump in various depthsOf 85, 120, 150, 180, 200, 250, 300 mmOption:You can also get the PA 35 with 230 V (PA 35 M) operating voltage,The loss of performance is then about 10%.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity: unbkt lcoolant: unbkt pressure: unbkt ttotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

machine measurements: 1.300 x 1.600 x 440 mmmachine weight: - kgpower capacity: ca. 2 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

machine measurements: 2.000 x 1.300 x 1.800 mmmachine weight: 1.500 kgpower capacity: ca. 2,2 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

machine measurements: H/B/T 630x418x325 mmmachine weight: 30,3 kgpower capacity: 240V, 50/60 Hz, 0,1 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

machine measurements: 2.900 x 700 x 1.700 mmmachine weight: 400 kgpower capacity: 2,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

machine measurements: 1800 x 2300 x 2300 mmmachine weight: 1800 kgpower capacity: -- kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

machine measurements: -- mmmachine weight: -- kgpower capacity: 189 kWCondition: usedSpecification: convection oven- Air circulation oven type ELIOG Kelvitherm / KUV 250/25-25-25,technical data:- inner dimensions: 2.500 x 2.500 x 2.500 mm- Temperature: max. 250°C- Temperature adjustable via programme controller- Door: single-leaf door- Electrical heating: 189 KW- Control system: EUROTHERM- with CE- Weight approx.: 3000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Temperature range: Max. 30 °Cheating capacity: . kWCooling capacity: . Wcirculating medium: 30 Gradtotal power requirement: 4,5 kWweight of the machine ca.: tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

liter capacity: . ltotal power requirement: 6900 Wweight of the machine ca.: 0,8 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ... mais informação

Cooling capacity: 3000 kcal/hcoolant: dest. Wasser tank: 7,7 lvolume capacity: 3 l/minoperating pressure: 3,25 barconnected load: 0,5 kVAconnected load frequency: 380 V• water circulation for destilled water or for water with anti-freeze and anti-corrosion protection, new-valued, was only used for testing purposesThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of filling stations: 10, with hoses. ... mais informação

3D Systems LC3D print box for sale. All lamps are functional and in good condition. The LC-3D Print Box is a light-based UV post-curing device specially designed for post-curing 3D printing materials. The LC-3DPrint Box is equipped with 12 UV lamps. This ensures that the part is illuminated from all directions, resulting in a fast and even curing cycle. The spacious interior of the LC-3DPrint Box allows multiple products to be cured at the same time. In addition, the box offers enough space to place an articulator. If necessary, the UV lamps can be easily changed. Advantages of the LC-3DPrint Box - Full light spectrum (300-550 nm) - Short polymerization times - Controllable temperature for optimal curing - Noiseless - Objects are illuminated from all sides - New post-processing process (without additional nitrogen) - Flexibility in setting exposure times - A single device that can be use ...

3D Systems ProJet UV Finisher for sale. All lamps are functional and in good condition., Machine dimensions in mm (w x d x h): 420x420x480, Weight in kg: 12, Power supply: AC100~240V 50/60Hz, 2.0A ... mais informação

With the Easy Clean System you can clean components of 3D Systems MultiJet printers such as the ProJet 2500Plus very easily and quickly. ... mais informação

FAS BWU 1100, bag-in-a-roll making machines, 1.100 mm wide reels, for LDPE HDPE MDPE and BIO BAGS in a roll, can be use in line and off line, servo driven, see more in attached pdf brochure, 2 machines available for sale 2015 and 2017, price per unit ... mais informação

Constructed according to the high Italian quality standards, Made in sturdy carbon steel welded structure Flat bottom with horizontal screw and doctor blade, or conical bottom with diagonal screw (depending on project requirements) plexiglass inspection window, Electric motor bespoke to project material and size paddle type minimum level indicator Bolted inspection door, Safety devices, CE compliance, drawings, user manual, Can be integrated with our [DRYING SYSTEM](https://www.germanplast.eu/listings/4115725-drying-system-for- vertical-mixers)

VERTICAL MIXER, 10 m3 capacity, total height approx 5.400 mm including transmission group, max Ø 2.300 mm., constructed in painted electro-welded carbon steel., inner auger diam.350 mm. lower loading hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600x500, pulley and belt transmission, protected by carters, inspection doors with safety limits, cleaning hinged door on bottom of cone for complete discharging, with safety opening, side discharging pipe to big bag with valve at 2.500 mm from ground, max electric level indicator, paddle type, automatic greasing kit, 11 kw drive, complete with control panel., electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance and instruction manual

This is an accessory to our buffer silos range ([GE253](https://www.germanplast.eu/listings/4115680-buffer-silo-new-m achinery)) not a stand-alone unit., Mostly used to dry EPS scraps Standard configuration (customizable): 1,1 kw fan in a painted steel cage 15,3 kw heating unit size 400x300x300 mm. Metallic cell filters 500×500 mmplete with galvanized steel frame and in/out connections System of pipings 100 and 200 mm diam., curves, clamps, to convey heated air into the silo. Electropneumatic guillotine shutters in galvanized steel. temperature probe, connections. Complete with electric cabinet managing the whole system. User’s manual, drawings, CE compliance

AERAULIC SEPARATION SYSTEM, for labels, dust, light weight contamination on flakes, granules and regrinds, max 1.800 kg/h, constructed in painted steel + galvanized steel elements, Complete system with 4 kw vent, Ø160 pipes, bends, clamps, Cyclone, hoppers, filter sleeve, complete with big bag supporting structure, Possible addition of weighing system, For lower production plants see our ref GE460, You are welcome to send a product sample to evaluate the best solution., installed power : 4.0