outras máquinas para plástico usadas para venda

The ProJet® MJP 3600 MultiJet 3D printers produce precise parts with high accuracy and easy post-processing, resolution (xyz) resolution (xyz) hd mode uhd mode xhd mode: Resolution HD (xyz): 375x450x790 DPI; 32μm layer, resolution UHD (xyz): 750x750x890 DPI; 29μm layer, resolution XHD (xyz): 750x750x1600 DPI; 16μm layers, Accuracy (typical): ±0.025-0.05 mm per 25.4 mm of part dimension. Accuracy may vary depending on print parameters, part geometry and size, part orientation, and type of post-processing., Dimensions in mm (w x h x d): 749 x 1194 x 1511 mm, mass: about 300 kg, E-connection / consumption: 200-240 VAC, 50 Hz, single-phase, 10A 100-127 VAC, 50/60 Hz, single-phase, 15A, certification: CE, Installation: 03/2017, Commissioning: 03/2017, print modes: HD - high definition, Net build volume (xyz) net build volume (xyz) hd mode uhd mode xhd model: 11.75 x 7.2 x 8 in  ...

The ProJet 1200 from 3D Systems is smaller than a coffee machine, is suitable for daily use and especially for the dental and jewelry industries. The post-processing unit is integrated in the device., Layer thickness: 0.03mm, resolution xy: 56 micron (effective 585 DPI), Vertical construction speed: 14mm per hour, Installation space in mm (x/y/z): 43x27x180mm, building material: VsiJet FTX, support material: Not mandatory, communication: LAN (Ethernet), Machine dimensions in mm (w x d x h): 230x230x370, Weight in kg: about 10, Power supply: 100-240V 50/60Hz, software: 3DSprint (not included), file formats: STL, Vertical build speed: 14mm per hour

The ProJet 1200 from 3D Systems is smaller than a coffee machine, is suitable for daily use and especially for the dental and jewelry industries. The post-processing unit is integrated in the device., Layer thickness: 0.03mm, resolution xy: 56 micron (effective 585 DPI), Vertical construction speed: 14mm per hour, Installation space in mm (x/y/z): 43x27x180mm, building material: VsiJet FTX, support material: Not mandatory, communication: LAN (Ethernet), Machine dimensions in mm (w x d x h): 230x230x370, Weight in kg: about 10, Power supply: 100-240V 50/60Hz, software: 3DSprint (not included), file formats: STL, Vertical build speed: 14mm per hour

ProJet 860Pro ColorJet Printer 3D printer used from 3D Systems for sale., Accessories: depowdering station, All specifications and operating/installation conditions according to manufacturer brochures. Errors and typographical errors excepted., Layer thickness: 0.1mm, Installation space in mm (x/y/z): 508x381x229, number of nozzles: 5x HP11 printheads, building material: VisiJet PXL Core, LBL 3D printing powder, VisiJet Binder, LBL 3D Binder, communication: LAN (Ethernet), Dimensions machine in mm (wxhxd): 1190x1160x1620, Weight in kg: approx. 370KG empty weight, Machine dimensions in mm (wxhxd): 1190x1160x1620

The ProJet® MJP 3600 MultiJet 3D printers produce precise parts with high accuracy and easy post-processing, resolution (xyz) resolution (xyz) hd mode uhd mode xhd mode: Resolution HD (xyz): 375x450x790 DPI; 32μm layer, resolution UHD (xyz): 750x750x890 DPI; 29μm layer, resolution XHD (xyz): 750x750x1600 DPI; 16μm layers, Accuracy (typical): ±0.025-0.05 mm per 25.4 mm of part dimension. Accuracy may vary depending on print parameters, part geometry and size, part orientation, and type of post-processing., Dimensions in mm (w x h x d): 749 x 1194 x 1511 mm, mass: about 300 kg, E-connection / consumption: 200-240 VAC, 50 Hz, single-phase, 10A 100-127 VAC, 50/60 Hz, single-phase, 15A, certification: CE, Installation: 03/2017, Commissioning: 03/2017, print modes: HD - high definition, Net build volume (xyz) net build volume (xyz) hd mode uhd mode xhd model: 11.75 x 7.2 x 8 in  ...

3D printer Projet 660Pro full color printer from 3D Systems for sale. The machine is in very good condition and freshly serviced according to the manufacturers instructions. Multiple devices are available. ... mais informação

3D printer Projet 660Pro full color printer from 3D Systems for sale. The machine is in very good condition and freshly serviced according to the manufacturers instructions. Multiple devices are available. ... mais informação

3D printer Projet 660Pro full color printer from 3D Systems for sale. The machine is in very good condition and freshly serviced according to the manufacturers instructions. Multiple devices are available. ... mais informação

3D printer Projet 660Pro full color printer from 3D Systems for sale. The machine is in very good condition and freshly serviced according to the manufacturers instructions. Multiple devices are available. ... mais informação

Operating hours: 66511 Filling: Accura Xtreme grey Condition: Buildable, limited build quality until the following repairs are completed: Repair #1: Optics and profiler exchange, offer manufacturer: 8,973.45 EUR Repair #2: replacement of the load cell and VAT electronics, offer manufacturer: 4,206.25 EUR, Installation space in mm (x/y/z): 650x750x550mm, operating hours: approx. 67000h, Dimensions in cm (w x h x d): 126x220x228cm, Weight in kg: 1500KG

Year: 2003 - technically efficient, ready to work – after full service - minimum welding dimension: 370 mm - maximum welding dimension: 2500 mm - profile supports  ... mais informação

Description: SEPRO AXESS7 S3 TRANS Serial number : P16907 Power , ,maxi ,: 1,5 Kva Voltage : ·ph-400 Vac + -10 %  , ,50/60Hz controller including Approx. Onsite Dimension. (l x w x h): 2,250 x 1,000 x 1,630 mm, weight approx.: 300 kg ... mais informação

Description: ROBOT SEPRO , Modelo PIP 3011 BZ Serial Number:9882Approx. Onsite Dimension. (l x w x h): 2,600 x 1,900 x 1,100 mm, weight approx.: 300 kg ... mais informação

Description: Machine number: 802 411 Connected load: 7.5 KW Supply voltage: 380 V Amperage: 16 AApprox. Onsite Dimension. (l x w x h): 1,700 x 1,500 x 500 mm, weight approx.: 280 kg ... mais informação

Description: Machine number: 803082 Connected load: 7.5 KW Supply voltage: 380 V Current: 16 A Attention: Main switch defective! Machine runs when new main switch is installed.Approx. Onsite Dimension. (l x w x h): 1,450 x 1,000 x 650 mm, weight approx.: 330 kg ... mais informação

Description: including the control cabinet to the right Performance data forces: Press cylinder max. closing force: 8,000 kN, free break-open force on the upper press table: 110 kN, Speeds: Closing speed: 10-500 mm/s, pressing speed: 1-38 mm/s, tearing speed: 0.5-10 mm/s, opening speed: 10-300 mm/s, time for press pressure build-up: 1 s Press cylinder dimensions: 1 piece D 600 mm, drive cylinder: 2 pieces 190/90 mm, hydraulics: operating pressure of hydraulics 315 bar, main pump flow rate: 152.4 l/min, oil tank capacity approx. 1,700 l, operating fluid: HLP-D32, electrical supply: 380 V, 50 Hz Top plate dimensions: 1,500 x 1,200 mm, opening width: maximum distance between plates 1,500 mm, overall height above floor: approx. 7,500 mm, travel: closing stroke 1,190 mm, total weight: 55 t, press frame approx. 20 t, press ram approx. 10 t, press cylinder approx. 2.2 t, press plunger approx.  ...

URBAN Welding Cleaning Line Complete line, currently set to Rehau Urban AKS 6110/4-35/25 - Right stop - Year of construction 2001 - Welding dimension 3500 x 2500 - U-welding - C-welding Urban Cooling Belt 20/35 Urban SV 610 with turning station WT 660 - Flow direction right-left - Year of construction 2001 - with profile recognition -Tools: - ISBU - Radius gauge - 2 different groove knives at the bottom and top - Piercing knife for backstabbing wings - Various inner folding knives - Disc milling cutters - Drill groove cutters

We are selling a Stratasys F370 on behalf of a customer. Maintenance contract was active until 04/2023. The machine is in very good working condition and comes with many accessories., Stratasys F370 Accessories:, - 9 Build Trays, - 1 role QSR Support, - 1 roll ABS black, - 8 printheads (2 installed), - 4x lye powder for washing out the support material, - last electrical safety test in 10/2023, network connection: LAN (Ethernet), WiFi, software: GrabCad Print (Download), Insight Software License, Installation space (x,y,z): 355 x 254 x 355, operating system: Windows 7, Windows 8, Windows 8.1, Windows 10 (64 bit only), Windows 11 at least 4 GB RAM, building material: ABS-CF10, ABS-ESD7™, ABS-M30, ASA, Diran™ 410MF07, PC-ABS, PLA, QSR Support, TPU-92A, Printing features: Replaceable extruder, heated build chamber, closed build space, two extruders (model & support), printing tech ...

Compact copper granulating plant with a total weight of 3.500kg dust aspiration in the primary mill conveyor belt and another one in the separation table, at the back we have a drawer with several filters where the dust accumulates to work without mask, also comes with 2 vibrating tables to obtain a purity of copper of 99.9% in the conveyor belt we find an electromagnet frequency inverters Siemens brand the primary mill is 30cv the machine in total makes a sum of 48kw with an hourly production of 400kg/h.

3D printer manufactured in 2021. This 3D SYSTEMS Projet 2500 Plus is equipped with essential features like 3D Sprint Basic for streamlined operation and a VisiJet M2R-CL Starter Kit for clear plastic prints. With only 10 working hours, its practically new. Its MJP EasyClean System ensures hassle-free maintenance, and the ProJet Finisher guarantees professional finishing. If you seek reliability and quality, buy this ProJet 2500 Plus 3D printer. For further details, contact us.