outras máquinas para plástico usadas para venda

Year: 2003 - technically efficient, ready to work – after full service - minimum welding dimension: 370 mm - maximum welding dimension: 2500 mm - profile supports  ... mais informação

Base Machine is a OMSO DM44N 2-Lane Lid Machine, age 2004, L- Format in feed conveyor for feeding Vertical Lid Stacks, acts as an accumulator as well Auto feeding of Lid Stacks to the 2 x Universal Screw Denesters with suction Nipples Infeed conveyor with Vacuum to keep Lids in proper position Each Lane with PAGOmat 6HS Pressure Sensitive Label dispensers, with PLC Controls, manufactured by PAGOmat/ Fuji Seal, Switzerland Outfeed Conveyor to 2-Lane Lid Stacker 2-Lane Stacker, each Lane with 2 x Universal Helical Screws Main Drive with a variable frequency, AC-Synchronous Motor with a brake, with Microprocessor Controls Max. dia. of round Lids: Ø125 mm Max. dimensions of Rectangular & Oval Lids: 125 x 150 mm Max. height of Lids: 25 mm Speed with Oval Lids dimensions 120 x 130 mm: Single Lane 110 Lids/ min, Dual Lane 220 Lids/ min 400 V, 3 phase, 50 Hz

Inv. Num. : 7416 Type: LXJ-2030 Producer: UNICH Created: 2014 Parameters: Laser power: 2x130 W Work table length: 3000 mm Work table width: 2000 mm Equipment: Radiator Compressor PC Software Exhaust fan The laser is designed for cutting plastics and wood.  ... mais informação

Inv. Num. : 7465 Type:- Producer:- Generated: Parameters: The line consists of the following parts: Copper wire winder (double) Gumolis Insulation Line Injection 2x Bongard (Vein Spreader) Main street Gumolis Shell.line Compensator Line unwinder Coil Housing Line Auxiliary towing Compensator Cooling Enclosure Cooling water tank Outdoor refrigeration units Large pump water system Stolberger Filling Machine Wire rewinding workstation Round semi-automatic Welding foil package Mechanical Profile Projector HV test room Thermostat - Oven 5 x Temperature unit for extruder

Plate press - table press - Laboratory Press - Universal Press MHSP522 Press area 230 230 mm Clear width 200 mm Manual drive with worm gear screw jacks 5 KN Pressure 5 KN (0.5 tons) Weight 55 kg Per sensor revolution 0.5 mm path, this little manual force with great force, very fine deliverable. Pressing force is long maintained by self-locking.

Frequency-controlled heating laboratory press with force measuring device -Pressure 20 KN / 2 tons -Pressing area 220 220 mm -Maximum pressing force at 220 220 mm: 41 N / cm² -Hot press with moveable lower pressing plate, electric drive with gear reduction, force measurement is carried out by means of strain gauge sensor -Heat output approx. 1 KW -Plate temperature 120 ° C -Dwell time / duration of laminating: 1-10 s -Pneumatic connection 6bar required -Power supply 400 V, 16 A -Sliding table with integrated positioning pins, lower pressing plate, pneumatic drive -Pressing panels with switchable integrated vacuum channel -Electrical control system integrated with PLC control display in the front panel of the machine -Side channel pump to generate the vacuum

Data sheet heating press Oropress Pneumatic press 5 KN / 0.5 tons Press stroke 50 mm Adjustment of the clear height with handwheel and spindle, adjustable from 100 to 220 mm. With top heating plate 120 x 100 mm and temperature control, temperature up to 250 °C. Pneumatic two-hand control with triggering via Festo ZSB. Pneumatic sliding table 180 x 220 mm for loading outside the machine. Machine dimensions W = 1100 mm, L = 700 mm, H = 1850 mm Machine weight approx. 300 kg Movable on castors On request for an extra charge with second heating plate and temperature control at the bottom.

Laboratory Press EHSP125 - Demonstration Machine Table press / electric spindle press with pressing pressure 20 KN (2 tons). Press drive with screw jack, reduction ratio 1 : 12, spindle diameter 32 mm, pitch 6 mm, pressing surface approx. 100 100 mm, clear height and stroke approx. 300 mm. Gear motor 0.37 KW, 1,390 rpm, 4-pole, with spur gear i = 1 : 5, Speed 150 mm / min. Max dynamic load 20 kN. With reversible control, emergency stop and motor protection plug. Sturdy steel press frame. Base table made of high-quality aluminum profiles 4545 mm, table surface 600 600 mm, table top made of multiplex top. Total weight approx. 100 kg. The table press has 20 kN pressing pressure (dynamic load). Typical applications are pressing work with exact delivery. Suitable for pressing bonding, embossing and impressions. The screw jack has a twist protection so that the p ...

Electric spindle press REITZ EHSP100F as laboratory heating press / demonstration machine Laboratory heating press with pressing pressure 40 KN (4 tons), ratio 1 : 16, spindle diameter 45 mm, pitch 8 mm, spindle stroke 0.5 mm per revolution. Gear motor 0.75 KW, 1,500 rpm, 4-pole, with spur gear i = 1:5, Speed 150 mm / min. Max dynamic load 25 kN. With reversible control, emergency stop and motor protection plug. Total weight approx. 100 kg, table surface 600 600 mm, pressing surface approx. 150 250 mm, clear height approx. 60 mm. Base made of high-quality aluminium profiles 4545 mm, the table top is made of glued plywood top. The laboratory heating press has 40 kN pressing pressure (dynamic load). The spindle is self-locking and thus maintains the pressing force for a longer period of time. For an extra charge with heating plate, insulating plate and temperatur ...

Used pneumatic press 4 KN -Pressing force 4 KN (0.4 to) -Pneumatic cylinder make Festo -Pneumatic two-hand control - press plate made in 4 Guide pillars -Work surface between guide columns 200 220 mm -Machine table made of aluminium profiles and PA plate 600 600 60 mm -3-sided walls from Plexiglas -Total weight approx. 70 kg Suitable for stamping or embossing tools or plate bonding.

Semi-automatic drilling device for plastic parts This purely pneumatic drilling device is designed for repeatable drilling of small plastic parts up to approx. 40 x 200 x 40 mm with holes up to 3 mm. Specifications: - Linear axis travel 420 mm - Stroke approx. 30 mm - Height adjustment approx. 100 mm - With 2-hand release - Plexiglass protection on 3 sides - Emergency stop switch - Sturdy, mobile frame made of aluminium profiles - With 4 swivel castors, 2 of them with brakes - Overall dimensions approx. 1000 x 1000 x 1700 mm - Weight approx. 50 kg - With collet for drill bit 1.5 mm Expiration: - Setup: Adjust stop angle to part size - Setup: Alignment of cross table in X and Y - Setup: Set height adjustment to part height - Inserting the part - Triggering via 2-hand button and holding until drilling is completed - Removal of the finished part and placement  ...

Electric surface press REITZ EHSP522 Pressing surface 200200mm Pressure 5 KN / 0.5 tons Suitable for surface bonding of plastics and composites. On request with: - Heating plate and temperature control - Load cells and gauges for use as test press  ... mais informação

Collin Heating Press for Forming Plastics Collin Heating Press 78 Tons for Forming Plastics / Prepregs for Carbon Parts / Composites Type: Press 500 P Plate press for plastics processing / polymeric materials / ceramic masses Pressing pressure approx. 78 tons Temperature range from 20° to 300°C Usable pressing area 496 x 496 mm Voltage: 3 x 400 / 230V Y Power requirement: 3 x 125 A Frequency 50 Hz Power 67 KW Water pressure 4 bar Air pressure 4 bar Hydraulic pressure build-up, Pmax hydraulic: 160 bar Built in 1999 Weight approx. 5 tons Documentation and circuit diagrams available

Fully automatic hot stamping press Oropress Mechanical eccentric press with lift table Lift table as pneumatic sliding table 250 x 250 mm Fully automatic sequence, optionally triggered with foot switch for single stroke Heated press punch 120 x 200 mm up to 250 °C Safety grille Film Feed Unit Built in 1986

Hydraulic filter changer: 250 mm, brand: Tecnova, double filter, for extruder 160 Ø diam, year: 2009. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.  ... mais informação

Film buffer silo: 10000 litres, geared motor: 2.2 KW (3 hp). With remover.  ... mais informação

Winder: 1 coil, Brand: Aromaza, in stainless steel. With electrical panel and variator. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.  ... mais informação

Plastic agglomerator, engine: 75 KW (100 hp), tank size: 1 m high, 1 m diam. Electrical panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.  ... mais informação

New stainless steel centrifuge, model: CP-R2000, shaft length: 1200 mm, shaft diameter: 500 mm, motor: 37 Kw (50 hp) at 3000 rpm. No electrical panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.  ... mais informação

Circular vibrating screen, brand: Roto Sieve, diameter: 1,120 mm, power: 3 KW (4 hp), in stainless steel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.  ... mais informação