outras máquinas para plástico usadas para venda

 ... mais informação

This Concept Laser M2 cusing 3D Printer was manufactured in the year 2015. ... mais informação

This MAS 120E Extruder machine was manufactured in the year 2015 in Austria. It has a load of 182 kVa. The machine was completely retrofitted by MAS 2019 and since then not in production, Its condition is like new. ... mais informação

Piovan granulate tank, + inverter+ PLC #5249 With safety top door. Tank diameter 650 mm Tank height: 800 mm Overall size: 650x800x1300 mm  ... mais informação

Mechanical speed 1200 m/min Maximum pre-stretch 400% (1m = 5m) Thickness of the film 530 mm Film width 300550 mm Finished roll diameter, at most 250 mm Jumbo (mother) roll diameter, at most 500 mm ... mais informação

Pre-stretch is the process that allows stretch film to be stretched before being applied to a load. It is only 5 µm - 8 µm thick, it is very strong and tear resistant. In case of the pre-stretch, less film is required to wrap a pallet than in case of any standard products. As much lower quantities of the product are used to wrap the load, this provides for substantial financial savings. The main advantage of the machine is pre-stretch effect while winding. According to technical tasks film tension may reach 400%. The machine enables stable work and average output of 50 tons pre-stretch film per month. It is the best choice for getting hand and machine pre-stretch film rolls. Thickness of the film 5…30 mm Mechanical speed 1200 m/min Rewinding inaccuracy regardless of the rewinding length 1.0 m Maximum pre-stretch 400% (1m=5m) Finished roll diameter, at most ...

Haitian MA8000 injection molding machine, model 26800 Production - China, release of 2015. Is in working order. Pumping speed (g/s) : 642 g/s Starting stroke : 1040mm Screw diameter (mm) : 100mm Open stroke (mm) : 1040 mm Closing force (kN) : 8000 kN Ejector stroke (mm) :280mm Distance between columns (height) (mm) :1000mm Ejector force (kN) : 186 kN Distance between columns :10001000mm Power (kW) : 140.75 kW Theoretical shot volume (cm³) :3691 cm³

The machine for the production of polyurethane foam (polyurethane foam) MODEL BLCR35 is intended for mixing and feeding a two-component polyurethane system for the production of rigid foam with self-extinguishing properties into a mold (door leaf). The BLCR35 model is a low pressure foaming equipment. The mixing head is cleaned by flushing with a cleaning agent dichloromethane (dioctyl phthalate can also be used for cleaning).

There is a complete pultrusion line with three Krauss Maffei RimStar Nano pumping machines, three creels, ABUS column-mounted slewing jib crane and a KraussMaffei EW 2300 CFI winder, tensile force: 10t, max. profile dimensions: 300x50mm, max. speed: 4m/min, on-site inspection is possible. ... mais informação

For sale complete line for plastic caps, include: 1. CCM48 with moulds and CVS 2. cooling system 3. slitting machine Perfect condition. Working at moment. Origin Italy.  ... mais informação

Three lines hot-slitting T-shirt bag making machine, super high speed with fully automatic production.Special design servo-driven bag feeding is easy to operate.Equipped the multi auto alarms with automatic stop design for safety.Independent three lines temperature control.Equipped with multi auto tension control to maintain the stability of the film roll.High efficiency on production.Improved tension auto control to enhance the productivity.Special Rocking System design to avoid overlap of bags sealing lines from sticking.Film width (mm) Max. 1500 Bag Size (mm)  Width (mm) Max. 330 x 3Length (mm) Max. 700Max. Production Speed (cycles/min)  Max. 300

MURAT - NR 241 - cutting, milling and screwing of reinforcement steel MURAT - KD 658/20 - 4 head welding machine MURAT - CN 770/20 - corner clean machine Capacity Min. 100 windows / 8 hours, Max. 120 windows / 8 hours All these machines make automatic production line for PVC systems. The price includes these three machines above and transporter of the frames between welding and corner cleaning. MURAT - NR 241 - Details: All sawing, routing, drilling, reinforcement steel screwing, marking and end milling operations on PVC profiles are gathered in one machine controlled by computer. Stacking of 10 profiles (max. 6,5 m length). Manual barcode labeling system integrated with single-lines. Servo controlled automatic swing of the saw to all angles between 30° and 150° with 0.1° accuracy. Drain slot routing, drilling and routing at variable angles. Automatic sc ...

A KraussMaffei discharge table, used in profile production, is available. Weight: 300kg.  ... mais informação

BARATTI FRAMED VACUUM PUMP WITH SUCTION FILTER AND SILENCER Fabr. -No.: 216 105 // Type: ATMOS V4-KR Var. 0102 Equipment / Additional information: Roots Blower Section. oil and wear-free compression, air-cooled, V-belt drive with tension rails and belt guard and two-stage exhaust silencer Incl. the following accessories: -Vacuum relief valve -saugs. Fine filter 3" -Connection piece internal thread 3" - Rohrfederman. -1..0 bar, filled with glycerine -Drive motor Blower data: Max. negative pressure: 500 mbar, abs. Suction volume: 440 m3/h Fan speed: 2920 rpm Noise level: approx. 79 dB (A) Engine data: 7.5 kW, 2930 rpm, 400/690 V, 50 Hz, IP 55 ISO class F, B3, KKL

Label and cap remover machine from PET bottles: 3 x 1 m diam. Grille hole: 50 mm, axle rpm: 700 rpm, engine: 37 Kw (50 hp). Year: 2016.  ... mais informação

Machine manufacturer: ROLL O MATIC Machine model: DELTA 1100 Year of manufacturing: 2016 Materials: HDPE – LDPE - BIO Condition: in production Working hours: 812 Hours Complete line: YES Machine dimension: (length 17.5m /width 3.5m /height (2.5m to 3.3m) Welding width: 900 (3 X 300) Plastic type bag: T-shirt bag / bottom seal bag Final positioning of the bags: roll Bag length: Max: 3000mm; Min: 250mm Bag width: Max: 3X250mm; Min: - mm Film thickness: Max:60 microns; Min: 8 microns Bottom gusseting: No Side gusseting: Yes Depth: 150mm Output: Cycles/minute: 300 Production: Meters/min: 160 Unwinder: Type:Width + motorized shaft Mother roll width: 1700 Mm Unwind shaft: Number: X 1 ; Type: Pneumatic Mother roll diameter: 800 mm Web guide: Yes Sealer/Longitudinal: Yes Number lanes: 3 Photoelectric cell control: YES Sealing bar: Bottom Drive: Servo Control ...

There are 6 identical KraussMaffei profile saws available. Individual weight: approx. 800kg. ... mais informação

Recycling of PET bottles and PET films: Film washing and drying system for processing small-cut polyester films. • Capacity 700 - 800 kg/h polyester • Little used, almost as good as new. • The machine is still in operation. • Incl. big bag bagging station. A shredder must be procured separately. This means that an almost fully equipped production plant can be purchased. Also Folien + Technik e. Kfm. D-73728 Esslingen Phone +49 1577 5329827

Year: 2016 - technically efficient, ready to work - after full service - automatic screw feeding system - pneumatic control  ... mais informação

Year: 2016 - technically efficient, ready to work - after full service - automatic screw feeding system - pneumatic control  ... mais informação