outras máquinas de manutenção mecânica usadas para venda

Tilt tray sorter 2x 80 targets – second-hand - : Price on request! Manufacturer: Kosan Crisplant a/s Type: S2000-750 Year of construction: 1993 Sorter: Total length of the entire loop: 168.75m Number of changeovers: 80 Number of erecting units: 2 set Number of linear motors: 7 Number of bowls: 225 Shell pitch: 750mm Shell width: 700mm Speed: 1.5m/s 2 Scanners 160 slides 4 Infiltrations Number of sorter targets: approx. 2 x 2 x 40 targets (sorted to the right and left) Linus based controls Smallest size: approx. A4 x 8cm Maximum size: approx. boxes of 60 x 60 x 80cm Sorting capacity approx. 6 - 10,000 / hour Condition: good Available from. ca. Mid-2024 (possibly earlier on request) Location. Area Berlin More photos, videos and plans on request!

Trough screw, washing screw, screw conveyor used Conveying length: approx. 6500 mm Diameter: approx. 700 mm Slope: approx. 400 mm Wing height: approx. 210 mm Wing thickness approx. 4 mm Stainless steel Geared motor SEW 3 kW 22 rpm 220/400 V Dimensions approx. 7800 x 1800 x 1800 mm The screw can be converted according to your wishes by our own special machine construction. All articles are checked for function before delivery, if technically possible! Changes and errors in the technical data, information and prices as well as prior sale reserved.

Pipe screw, screw conveyor, cement screw, dosing screw used for cement, fly ash, sand, lime, cereals or similar materials Conveying length (from inlet to outlet): approx. 2.5 m Diameter Ø: approx. 260 mm Slope approx. 120 mm Spiral height approx. 90 mm Spiral plate approx. 8 mm Inlet / outlet: approx. Ø 260 mm Remote storage with stuffing box Drive with gear motor 4 kW 68 rpm Total dimensions: approx. 3700 x 450 x 550 mm Due to the stable construction, the screw is suitable for abrasive substances. Thanks to our own special machine construction, changes can also be made. We have various pipe screws in different lengths, slopes and diameters from a large mortar and plaster mixing plant. Of course, also various other components, such as filters, elevators, weighing containers... Changes and errors in the technical data, information and prices as well as prior sa ...

Angular cup unit, elevator, continuous conveyor used Manufacturer: GOUGH ENGENEERING Height approx. 7 m Shaft approx. 900 x 630 mm Stainless steel chain Plastic cup approx. 600 x 220 x 130 mm Gearmotor North 1.5 kW Thanks to our own special machine construction, changes are also possible according to your wishes. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Angular cup unit, elevator, continuous conveyor used Manufacturer: GOUGH ENGENEERING Height approx. 7 m Shaft approx. 750 x 620 mm Plastic chain Plastic cups approx. 450 x 200 x 120 mm Gearmotor Bauer 0.75 kW 27 rpm Thanks to our own special machine construction, changes are also possible according to your wishes. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale. Search terms: Becherlevator, Becherwerk, Winkelbecherwerk

Trough chain conveyor TKF Redler up to 120 to/Hused Trough width inside approx.: 300 mm Trough depth inside approx.: 320 m Trough length approx.: 6800 mm Inlet opening approx.: 300 x 400 mm Exhaust opening approx.: 300 x 600 mm Taker distance approx.: 130 mm Drive motor NORD 220/380 V, 1.5 kW, 1410/18 rpm by replacing the engine, power can be increased Total length approx.: 6900 mm Other names: TKF, Reedler, Chain Conveyor

Weber spiral conveyors as feeding technology for Weber screwdriving systems, suitable for any application in the field of feeding fasteners, etc. Offer refers to a spiral conveyor. Other spiral conveyors of the same design are available.  ... mais informação

Stainless steel round conveyor ring conveyor trough 5850 mm used. Gutters width approx. 120 mm Gutters depth approx. 160 mm Deflection part approx. 800 mm Drive part approx. 900 mm with outlet part Total height approx. 800 mm Engine: SEW 3 kW, 29 rpm. Size approx. 5850 x 900 mm  ... mais informação

Trough length approx. 7300 mm Trough width approx. 280 mm Trough depth approx. 400 mm Inlet approx. 640 x 280 mm Spout approx. 320 x 280 mm Taker distance approx. 160 mm Taker width approx. 180 mm Chain gears Drive gear motor SEW-Eurodrive R67-DVE100M4 230/400 V; 8.0/4.6 A; 50 Hz; IP54 Power: 2.2 kW; 1455/62 rpm Total approx. 7400 x 750 x 1000 mm

Pipe screw conveyor screw inclined conveyor without motor used Our own special machine construction can also be made. Pipe diameter approx. 260 mm Pipe length approx. 4780 mm Screw coil length approx. 4200 mm Inlet/outlet-diameter approx. 250 mm Screw tube top open with lid Price without engine We adapt the engine to their use at an additional cost. Ideal snail for wood chips or similar wood chips. Total approx. 5050 x 1000 x 600 mm 2 pieces available

Manufacturer: NERAK Type: WB 370 Built in 2003 CC-foot 2160 mm CC-Vertical 9600 mm CC head 3110 mm Plastic cup approx. 36 cm wide 20 cm deep approx. 10 cups per m Rubber block chain Speed: 0.3 m/s Power 5-10 m3/h (bulk density 0.5-1.0 t/m3) User manual and technical drawings available

Stainless steel material feed station, material acceptance station bulk hopper acceptance bunker used Material collection station for plastics, grain, waste and other free-flowing products for further conveyment to the cup plant. Bulk opening approx. 4980 x 1600 mm Filling volume max approx. 7 m3 Screw length approx. 4000 mm Screw diameter: approx. 750 mm Slope: approx. 500 mm Drive: 5.5 kW at least the parts in contact with the material are made of stainless steel The complex is dismantled and can be visited in Riesa. Thanks to our own special machine construction, changes are also possible according to your wishes.

Acceptance bunker 3,550 x 6000 x H 1,560 mm, for bulk solids, with 3 dosing screws Universally applicable acceptance bunker for bulk material e.g. grains, wood chips, potatoes, waste... Conveying volume depending on bulk material 1 - 80 m3/h The pick-up bunker is filled from above on a easily accessible side of the acceptance bunker by means of a shovel loader. The access roads and exclusion zones must be marked in order to avoid accidents and damage to the bunker and its extensions by starting up. The three parallel, identical and directly driven snail trees transport the goods through a partition wall to a cross-arranged snail tree. The partition wall prevents the conveyed material from flowing back into the acceptance area. The product is transferred to the connected trough screw conveyor (TS 420 x 7,000) by the frequency inverter-controlled cross-screw, which is desig ...

Split Tray Sorter (Dual-Split) / Drop Flap Sorter / Bombay Sorter, 270 targets, incl. conveyor technology, telescopic belt conveyor, etc. – second-hand - : Price on request! The system is a complete sorting system including goods receipt and shipping! Also sold in partial quantities! Manufacturer: DistriSort (Netherlands) Type: Split Tray Sorter Year of construction: 2017 / 2018 approx. 270 destinations Length of the facility approx. 45m Width approx. 12m The sorter consists of manual feeding, waste conveyor, item identification, over 270 outputs, transverse exits, export containers, sorting material transport and packing stations. Basic data Sorting system incl. conveyor technology Up to 14,400 lay-ups per hour (average 12,000 / hour) On request (for an extra charge) incl. extensive conveyor technology, Nerak, scanner, goods receipt area, shipping area with c ...

Round vibratory feeder with attached parts memory Inner Ø: 404 mm Outer-Ø approx.: 900 mm Device height: 800 mm Equipment for panes with Ø 40 mm  ... mais informação

Nominal diameter 300 mm PN 10 bar  ... mais informação

Steel cables Wire ropes Slings made of steel Length: 20 m Diameter: 10 mm 1 end open / 1 end with safety eye hook Load capacity: unknown 2 pieces available  ... mais informação

Steel cables Wire ropes Slings made of steel Length: 10 m Diameter: 25 mm Hoses right/left Load capacity: 5 to. 10 pieces available  ... mais informação

Bizerba CWL Eco flex continuous scale with Sick VMS520 volumetric measuring system Bizerba CWL Eco flex Continuous Scale Dynamic weight detection with volume determination The CWL Eco flex can be integrated almost effortlessly into existing parcel shipping, sorting systems and feeding lines. Bizerba WM-CWL flex Continuous Scale Model: CWL Eco in Motion DE-09-MI006-PTB018 Max 60 kg Min 0.4 kg 230 V Sick VMS520 volume measurement system Features • Non-contact, active measuring method • Measuring the length, width and height of cuboid objects • Measure the length, width and height of objects with almost any shape • Works with a wide variety of surface structures and on different flat conveyor systems • Flexible system configurations • Calculation of the small-envelope cuboid (box volume) • Calculation of the real volume Device components Sick ...

Drive shaft: 40 mm Drive pipe diameter: 300 mm Trough: 300 x 300 mm / External dimensions: 410 x 410 mm Without an electric motor!  ... mais informação