máquinas de contracção usadas para venda

Kallfass Universa 400 with shrink tunnel, SlipTorque roller belt and conveyor belt Kallfass Universa 400 built in 2005 The system is immediately available. The price of the complete system includes the Universa 400, the Schlichter shrink tunnel, a SlipTorque roller belt and a conveyor belt. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - Metronic embossing system - Control: Siemens S7-300 - Siemens Touch TP277 operator terminal - Welding punch with replaceable welding strip - Side welding knife combination, can also be exchanged for a wheel-knife system - Processable films PE and PO - Year of construction 2005 - Simple shrink tunnel DS-600 with switchable rotating bars - Conveyor belt 1000 x 400mm - SlipTorque roller conveyor 2 ...

Kallfass Universa 400 with shrink tunnel and grab section Kallfass Universa 400 Year 2006 The system is immediately available. The Universa 400 is included in the price of the complete system. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - automatic length compensation to reduce the punch gap - Welding punch monitoring - Control: Siemens S7-300 - Operating terminal with Siemens touch panel - Welding punch with replaceable welding strip - Side welding knife combination, can also be exchanged for a wheel knife system - Processable films PE and PO - Year of construction 2006 - Kallfass Compact 450 SO shrink tunnel - Gripper section with inline belt - Book magazine on gripper section - Ionization for blocking loose leaves - Cur ...

Kallfass Universa 400 with shrink tunnel and grab section Kallfass Universa 400 NT Year of construction 2003 The system is immediately available. The Universa 400 is included in the price of the complete system. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - automatic length compensation to reduce the punch gap - Welding punch monitoring - Side sweat monitoring - Foil holding plate Pwq9ya - Control: Siemens S7-300 - Operating terminal with Sütron BT20 - Welding punch with replaceable welding strip - Side welding wheel-knife combination, can also be exchanged for a knife system - Processable films PE and PO - Year of construction 2003 - Shrink tunnel Kallfass Standard - Gripper section with inline belt - Curved band can be ...

small shrink line for sale consisting of vacuum chamber machine C 30 and shrink tank ST 40/60 - both mobile C 30 New machine - ST 40/60 overhauled 2022  ... mais informação

1 BECK shrink tunnel type HV601, working width 60 cm, year 1999 ... mais informação

1 BECK shrink tunnel type HV1000, working width 100 cm, year 1995 ... mais informação

format 35 x 54 cm Year of construction 1989 Film packaging station pneumatic slot Shrink tunnel Delivery date: immediately from stock Price on request. We deliver and install worldwide!  ... mais informação

Foil packaging from Meurer makes individual packaging transportable - safe, economical and absolutely reliable. In the following we provide you with a machine we offer with the following details; Manufacturer: Meurer Model: CM/HBB 40-T80 Manufactured in: 2000 V: 400/230 kW: 19 For forming and shrinking of beverage packages in following setups: Pos. Articel Unit dimensions Formation Container dimensions 1. a) 200 mid 53 x 38 x 106 mm 3 x 1 159 x 38 x 106 mm 1. b) 3 x 2 159 x 76 x 106 mm Additional formats, which can be packed in a later period 2. a) 4 x 1 212 x 38 x 106 mm 2. b) 4 x 2 212 x 38 x 106 mm Capacity of 10-12.000 p/h Foil specifications:     LDPE-Foil       Foil thickness:    approx. 30 - 40 µm Core type:    carton/paper Ø 76 mm

Description of the machine Technical specifications Dimensions: 14310 x 3950 Machine weight (HS): 5800 kg Machine weight (HS / C): 6000 kg Average power consumption: 500 kw Working pressure: 6 bar Pneumatic connection:1/4 Speed (hourly production):3600 - 4800 packages Heat produced/developed: irrelevant on the machine and 50 ° in the tunnel Consumption intake air: 2 NI/package Total installed capacity: 83 kw (machine: 8 kw - tunnel: 75 kw) Noise level: <80 decibels

BLOWER FOR OPENING THE BAG  ... mais informação

Steam shrinkage tunnel incl. steam generator (without transport conveyor)  ... mais informação

Used packaging machine for shrink film DIEZ, Type: AWS790CS For shrink wrapping of cartons - for LDPE shrink film or PE half tubing - Film width: max. 750 mm - Roll length: 1,000 m Viewing and test run are possible by arrangement.  ... mais informação

Mobile heat tunnel for shrinking of film bundles with film overhang  ... mais informação

 ... mais informação

Properties: Used foil welding machine of the manufacturer Italdibipack Angle welder with shrink tunnel Condition: fully functional with signs of use Ideal for fast material transport Expertly dismantled and packaged Specifications: Total length: 2,200 mm Total width: 850 mm Total height: 1.500mm Shrink tunnel length: approx. 700mm Working height: 930mm film width: 600mm Weight machine: 270Kg Rated power: 5Kw Year of construction: 2012 Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt tracks, inclined conveyors or telescopes for loading and unloading your goods! We are happy to prepare your individual offer or advise you on the conception or assembly questions. Simply let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of professional ...

REF-827 SLEEVE WRAPPER AND SHRINK WRAPPING MACHINE MEURER CM SB60-B The Meurer CM/SB-B sleeve wrapping machine produces sleeve-wrapped packages, with or without lateral shrink wrapping. The film is stretched lengthwise, for which reason it fits any product to perfection. Manufacturer: Meurer Model: CM/SB60-B Year: 2010 Product dimensions min/max: Length 40-400mm; width 50-600mm; height: 40-350mm Sealing jaw width: 600mm Film reel diameter: 400mm Overall dimensions: Length 1,520mm; width 1,430mm; height 2,090-2,140mm. Performance: up to 50 cycles/min depending on product and film specifications 400/230V + N + PE. Power: 3kW (without side shrinking), 11kW (with side shrinking unit) Air connection: 6 Bar, 1/2" Sealing system: permanently heated sealing tool with sealing blade and electronic temperature control. Easy access due to an open construction. Quick, tool-less ...

Inauen Maschinen AG Diptank Model: VC999 Stainless dip tank, chamber size 600mm L x 400mm W x 300mm H, digital temp control, mobile, 3Ph  ... mais informação

Film wrapping machine with infeed conveyor, stacking device, outfeed conveyor with 90° curve and other outfeed conveyor 90° to the machine. PLC: SCHNEIDER. Output: 60 bundles/min.  ... mais informação

automatic, angle welder CMW/AL 80/60 with shrink tunnel CMS 60 - used - : Prices from location: 5.950.-€ (net) Manufacturer: Meurer Automatic angle welder CMW/AL 80/60 with shrink tunnel CMS 60 Year of construction 1996 Machine No.: 4.0514.04.96 Type plate shrink tunnel: Type: CMS 60 Angle welders: CMW/AL 80/60 The product may have the following maximum dimensions: 80 cm x 60 cm x 20 cm height. Output: Average 3000 pieces/hour The first part of the machine welds the film and the second part (the shrink tunel) makes the film smooth. Depending on the characteristic and size of the items, you can adjust the speed, quality of the welding and smoothness of the film. The control module and placed over the infeed belt (left part of the machine). Condition: good, but existing errors: Film processing must be accompanied manually because a spare part for automation is not av ...

Used traypacker with shrink packer MACDUE, type: H100/A - El. Connection: 400 V, 50 Hz, 55 kW, 80 A - Air pressure: 6 bar - Condition: Very good, little in use All documents, such as spare parts list, el. Wiring diagram and operating instructions are available. Further information on request. Inspection and test run are possible by arrangement.